TSSA Part A - Unit 10 2025/2026 Exam
Questions with 100% Correct Answers |
Latest Update
A piping and instrumentation diagram (P&ID) will show major flow lines: -
🧠ANSWER ✔✔with all information for those lines
One of the main types of maintenance is: - 🧠ANSWER ✔✔Preventative
(4-021-1.3) One of the most important features of the first lines drawn in a
sketch is that they: - 🧠ANSWER ✔✔Show the main proportion of the sketch
Which of these is a key component to MMS (maintenance management
system)? - 🧠ANSWER ✔✔Work order system
One of the advantages of written communication is: - 🧠ANSWER ✔✔That it
can be proof read and edited
One of best practices for writing SOPs is to: - 🧠ANSWER ✔✔Use a
standardized template
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
1
, (4-021-2.2) The three most common views used in drawings are the front,
_______________ and _____________ views: - 🧠ANSWER ✔✔Plan, side
The letters LAL inside a circle on a P&ID stands for : - 🧠ANSWER ✔✔Level
alarm low
One of the commonly accepted document control best practices is to: -
🧠ANSWER ✔✔Have limited circulation of printed copies
Which of these is a reason to NOT use standard operating procedures
(SOP)? - 🧠ANSWER ✔✔Allow operators to use their own methods of a
procedure
A plant line tracing is a _________ that helps Power Engineers to learn a
new plant: - 🧠ANSWER ✔✔Single line sketch
If you discover an injured worker in your facility, you should ____________
on your two-way radio. - 🧠ANSWER ✔✔Press the "Man Down" button
Types of maintenance is classified in the following categories: - 🧠ANSWER
✔✔Routine, Preventative, Projects, and Emergency
On a P&ID, symbols are used for instrumentation the first letter stands for: -
🧠ANSWER ✔✔What is being measured
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
2
Questions with 100% Correct Answers |
Latest Update
A piping and instrumentation diagram (P&ID) will show major flow lines: -
🧠ANSWER ✔✔with all information for those lines
One of the main types of maintenance is: - 🧠ANSWER ✔✔Preventative
(4-021-1.3) One of the most important features of the first lines drawn in a
sketch is that they: - 🧠ANSWER ✔✔Show the main proportion of the sketch
Which of these is a key component to MMS (maintenance management
system)? - 🧠ANSWER ✔✔Work order system
One of the advantages of written communication is: - 🧠ANSWER ✔✔That it
can be proof read and edited
One of best practices for writing SOPs is to: - 🧠ANSWER ✔✔Use a
standardized template
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
1
, (4-021-2.2) The three most common views used in drawings are the front,
_______________ and _____________ views: - 🧠ANSWER ✔✔Plan, side
The letters LAL inside a circle on a P&ID stands for : - 🧠ANSWER ✔✔Level
alarm low
One of the commonly accepted document control best practices is to: -
🧠ANSWER ✔✔Have limited circulation of printed copies
Which of these is a reason to NOT use standard operating procedures
(SOP)? - 🧠ANSWER ✔✔Allow operators to use their own methods of a
procedure
A plant line tracing is a _________ that helps Power Engineers to learn a
new plant: - 🧠ANSWER ✔✔Single line sketch
If you discover an injured worker in your facility, you should ____________
on your two-way radio. - 🧠ANSWER ✔✔Press the "Man Down" button
Types of maintenance is classified in the following categories: - 🧠ANSWER
✔✔Routine, Preventative, Projects, and Emergency
On a P&ID, symbols are used for instrumentation the first letter stands for: -
🧠ANSWER ✔✔What is being measured
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
2
