CQM for USACE Exam Questions and Answers Fully Solved Latest Version 2025
Construction quality management - Answers The performance of tasks, which ensure that construction
is performed according to plans and specifications, on time, within a defined budget, and a safe work
environment.
Quality - Answers Conformance to properly developed requirements
Purpose of CQM - Answers The government's efforts, separate from, but in coordination and
cooperation with the contractor, assure that the quality set by the plans and specifications is achieved.
Contractor quality control function - Answers To assure that the completed project meets all quality
requirements of the contract.
Contractor benefits of CQM - Answers Increased profit and production, better communications,
planning, improved organizational skills, and outstanding performance evaluations to obtain future
contracts.
Two factors cause construction industry to become highly specialized - Answers Changing market and
increased tech and regulations
Factors that will influence both the govt and construction industry in the future - Answers New govt
regulations, greater influence from customer, improvement of QC and QA requirements, construction-
oriented mgmt info systems, formal partnering involving stakeholders, more reliance on design-build,
more consideration for life cycle requirements, increased performance based incentives
Pre construction submittals - Answers Required prior to or at start of construction or the next major
phase on a multi phase contract
Preconstruction submittals include: - Answers Scheduled and a tabular list of locations, features, and
other pertinent information regarding products, materials, equipment, or components to be used in
work
Product data - Answers Catalog cuts, illustrations, schedules, diagrams, performance charts, instructions,
systems and equipment
Samples - Answers Fabricated or I fabricated physical examples of materials, equipment, or
workmanship that illustrate functional and aesthetic characteristics of material or product that establish
standards
Design data - Answers Calculations, mix designs, analyses pertaining to a part of work
Test reports - Answers Signed by authorized official of laboratory that a material, product or system to
be provided has been tested in accord with specified requirements, unless otherwise specified, must
have been done within 3 years of date of contract award
, Certificates - Answers Statements printed on the manufacturer's letterhead and signed by responsible
officials of manufacturer's product, system, or material meets spec requirements. Must be dated after
award of project contract and clearly name the project
Manufacturer's instructions - Answers Preprinted material describing installation of a product, system,
or material, including special notices and concerning impedances, hazards, and safety instructions
Operation and maintenance data - Answers Data provided by the manufacturer, or system provider,
including help and product line documentation, necessary to maintain and install equipment for
operating and maintenance use
Manufacturer's field reports - Answers Documentation of the testing and verification actions taken by
manufacturer's representative at the job site, or on sample taken from the job site, on a portion of the
work, during or after installation to confirm compliance with standards and instructions.
Must be signed by an authorized official of testing laboratory or agency and state the test results to
indicate pass or failure
Closeout Submittals - Answers Documentation to record compliance with technical or administrative
requirements or to establish an administrative mechanism
Special requirements to end a contract or major phase if a multi phase contract
GPV - Answers Guiding principle validation
TPC - Answers Third party certification
Approving Authority - Answers Office or designated person authorized to approve submittal
Work - Answers On and off site construction required by contract documents, including labor necessary
to produce submittals, construction, materials, products, equipment, and systems incorporated or to be
incorporated
Submittals - Answers are NOT contract documents. Prepared by subcontractors and material suppliers,
sent to GC to review and approve them, which means the GC has varified field measurements, materials
have been checked and construction criteria has been coordinated. Then- the submittals are sent to
Designer (if the submittals are NOT checked and signed by GC, designer should immediately return them
without review). Designer reviews submittals ONLY for limited purpose of checking for conformance
with info given and correct design intent (designer is NOT responsible for accuracy of measurements,
completeness of details, verifying quantities, or checking fabrication or installation procedures). If
necessary, the submittals are forwarded (by designer) onto appropriate consultants for review. Once
consultant reviews, they send it back to designer, who then sends back to GC. Designer may indicate on
Construction quality management - Answers The performance of tasks, which ensure that construction
is performed according to plans and specifications, on time, within a defined budget, and a safe work
environment.
Quality - Answers Conformance to properly developed requirements
Purpose of CQM - Answers The government's efforts, separate from, but in coordination and
cooperation with the contractor, assure that the quality set by the plans and specifications is achieved.
Contractor quality control function - Answers To assure that the completed project meets all quality
requirements of the contract.
Contractor benefits of CQM - Answers Increased profit and production, better communications,
planning, improved organizational skills, and outstanding performance evaluations to obtain future
contracts.
Two factors cause construction industry to become highly specialized - Answers Changing market and
increased tech and regulations
Factors that will influence both the govt and construction industry in the future - Answers New govt
regulations, greater influence from customer, improvement of QC and QA requirements, construction-
oriented mgmt info systems, formal partnering involving stakeholders, more reliance on design-build,
more consideration for life cycle requirements, increased performance based incentives
Pre construction submittals - Answers Required prior to or at start of construction or the next major
phase on a multi phase contract
Preconstruction submittals include: - Answers Scheduled and a tabular list of locations, features, and
other pertinent information regarding products, materials, equipment, or components to be used in
work
Product data - Answers Catalog cuts, illustrations, schedules, diagrams, performance charts, instructions,
systems and equipment
Samples - Answers Fabricated or I fabricated physical examples of materials, equipment, or
workmanship that illustrate functional and aesthetic characteristics of material or product that establish
standards
Design data - Answers Calculations, mix designs, analyses pertaining to a part of work
Test reports - Answers Signed by authorized official of laboratory that a material, product or system to
be provided has been tested in accord with specified requirements, unless otherwise specified, must
have been done within 3 years of date of contract award
, Certificates - Answers Statements printed on the manufacturer's letterhead and signed by responsible
officials of manufacturer's product, system, or material meets spec requirements. Must be dated after
award of project contract and clearly name the project
Manufacturer's instructions - Answers Preprinted material describing installation of a product, system,
or material, including special notices and concerning impedances, hazards, and safety instructions
Operation and maintenance data - Answers Data provided by the manufacturer, or system provider,
including help and product line documentation, necessary to maintain and install equipment for
operating and maintenance use
Manufacturer's field reports - Answers Documentation of the testing and verification actions taken by
manufacturer's representative at the job site, or on sample taken from the job site, on a portion of the
work, during or after installation to confirm compliance with standards and instructions.
Must be signed by an authorized official of testing laboratory or agency and state the test results to
indicate pass or failure
Closeout Submittals - Answers Documentation to record compliance with technical or administrative
requirements or to establish an administrative mechanism
Special requirements to end a contract or major phase if a multi phase contract
GPV - Answers Guiding principle validation
TPC - Answers Third party certification
Approving Authority - Answers Office or designated person authorized to approve submittal
Work - Answers On and off site construction required by contract documents, including labor necessary
to produce submittals, construction, materials, products, equipment, and systems incorporated or to be
incorporated
Submittals - Answers are NOT contract documents. Prepared by subcontractors and material suppliers,
sent to GC to review and approve them, which means the GC has varified field measurements, materials
have been checked and construction criteria has been coordinated. Then- the submittals are sent to
Designer (if the submittals are NOT checked and signed by GC, designer should immediately return them
without review). Designer reviews submittals ONLY for limited purpose of checking for conformance
with info given and correct design intent (designer is NOT responsible for accuracy of measurements,
completeness of details, verifying quantities, or checking fabrication or installation procedures). If
necessary, the submittals are forwarded (by designer) onto appropriate consultants for review. Once
consultant reviews, they send it back to designer, who then sends back to GC. Designer may indicate on
