TSSA Part A - Unit 10 UPDATED ACTUAL
Exam Questions and CORRECT Answers
A piping and instrumentation diagram (P&ID) will show major flow lines: - CORRECT
ANSWER - with all information for those lines
One of the main types of maintenance is: - CORRECT ANSWER - Preventative
(4-021-1.3) One of the most important features of the first lines drawn in a sketch is that they: -
CORRECT ANSWER - Show the main proportion of the sketch
Which of these is a key component to MMS (maintenance management system)? - CORRECT
ANSWER - Work order system
One of the advantages of written communication is: - CORRECT ANSWER - That it can
be proof read and edited
One of best practices for writing SOPs is to: - CORRECT ANSWER - Use a standardized
template
(4-021-2.2) The three most common views used in drawings are the front, _______________
and _____________ views: - CORRECT ANSWER - Plan, side
The letters LAL inside a circle on a P&ID stands for : - CORRECT ANSWER - Level
alarm low
One of the commonly accepted document control best practices is to: - CORRECT
ANSWER - Have limited circulation of printed copies
, Which of these is a reason to NOT use standard operating procedures (SOP)? - CORRECT
ANSWER - Allow operators to use their own methods of a procedure
A plant line tracing is a _________ that helps Power Engineers to learn a new plant: -
CORRECT ANSWER - Single line sketch
If you discover an injured worker in your facility, you should ____________ on your two-way
radio. - CORRECT ANSWER - Press the "Man Down" button
Types of maintenance is classified in the following categories: - CORRECT ANSWER -
Routine, Preventative, Projects, and Emergency
On a P&ID, symbols are used for instrumentation the first letter stands for: - CORRECT
ANSWER - What is being measured
Which of these is a normal type of maintenance: - CORRECT ANSWER - Preventative
maintenance
On P&IDs, the letters "NO" and "NC" are often found beside: - CORRECT ANSWER -
Valve symbols
A process flow diagram (PFD) shows: - CORRECT ANSWER - Major piping to do with a
process
The letters LAL inside a circle on a P&ID stands for: - CORRECT ANSWER - Level
alarm low
(4-021-2.3) When projecting views of an object, the key view is the _____ view. - CORRECT
ANSWER - Front
Exam Questions and CORRECT Answers
A piping and instrumentation diagram (P&ID) will show major flow lines: - CORRECT
ANSWER - with all information for those lines
One of the main types of maintenance is: - CORRECT ANSWER - Preventative
(4-021-1.3) One of the most important features of the first lines drawn in a sketch is that they: -
CORRECT ANSWER - Show the main proportion of the sketch
Which of these is a key component to MMS (maintenance management system)? - CORRECT
ANSWER - Work order system
One of the advantages of written communication is: - CORRECT ANSWER - That it can
be proof read and edited
One of best practices for writing SOPs is to: - CORRECT ANSWER - Use a standardized
template
(4-021-2.2) The three most common views used in drawings are the front, _______________
and _____________ views: - CORRECT ANSWER - Plan, side
The letters LAL inside a circle on a P&ID stands for : - CORRECT ANSWER - Level
alarm low
One of the commonly accepted document control best practices is to: - CORRECT
ANSWER - Have limited circulation of printed copies
, Which of these is a reason to NOT use standard operating procedures (SOP)? - CORRECT
ANSWER - Allow operators to use their own methods of a procedure
A plant line tracing is a _________ that helps Power Engineers to learn a new plant: -
CORRECT ANSWER - Single line sketch
If you discover an injured worker in your facility, you should ____________ on your two-way
radio. - CORRECT ANSWER - Press the "Man Down" button
Types of maintenance is classified in the following categories: - CORRECT ANSWER -
Routine, Preventative, Projects, and Emergency
On a P&ID, symbols are used for instrumentation the first letter stands for: - CORRECT
ANSWER - What is being measured
Which of these is a normal type of maintenance: - CORRECT ANSWER - Preventative
maintenance
On P&IDs, the letters "NO" and "NC" are often found beside: - CORRECT ANSWER -
Valve symbols
A process flow diagram (PFD) shows: - CORRECT ANSWER - Major piping to do with a
process
The letters LAL inside a circle on a P&ID stands for: - CORRECT ANSWER - Level
alarm low
(4-021-2.3) When projecting views of an object, the key view is the _____ view. - CORRECT
ANSWER - Front
