ASE A6 Test Prep (Electrical & Electronic
Systems) Exam Questions And Answers
Technician A only - - -
correct answer ✅A technician connects one lead of a DMM (digital
multimeter) to the positive (+) terminal of a battery and the other
meter lead to the "B" terminal of the starter solenoid and then
cranks the engine. During cranking, the voltmeter displays a reading
of 878 mV.
Technician A says this reading indicates the positive battery cable
has very high resistance.
Technician B says this reading indicates that the starter armature is
defective.
Who is right?
Technician A only
Technician B only
Both Technicians A and B
Neither Technician A nor B
,ASE A6 Test Prep (Electrical & Electronic
Systems) Exam Questions And Answers
Replace the battery - - -
correct answer ✅When performing a load test on a battery, a
technician finds that the battery voltage drops below specifications.
Which of the following is the MOST likely repair?
a. Recharge the battery and return it to service
b. Recharge the battery and retest it
c. Replace the battery
d. Replace the voltage regulator
Technician A only - - -
correct answer ✅Two technicians are describing battery charging.
Technician A says to remove the surface charge from a recently
charged battery and apply a 300-ampere load across the adapters
for 15 seconds.
Technician B says to remove the surface charge from batteries,
which have been in storage.
Who is right?
,ASE A6 Test Prep (Electrical & Electronic
Systems) Exam Questions And Answers
Technician A only
Technician B only
Both Technicians A and B
Neither Technician A nor B
Technician A only - - -
correct answer ✅A technician connects one lead of a DMM (digital
multimeter) to the positive (+) terminal of a battery and the other
meter lead to the "B" terminal of the starter solenoid and then
cranks the engine. During cranking, the voltmeter displays a reading
of 878 mV.
Technician A says this reading indicates the positive battery cable
has very high resistance.
Technician B says this reading indicates that the starter armature is
defective.
Who is right?
, ASE A6 Test Prep (Electrical & Electronic
Systems) Exam Questions And Answers
Technician A only
Technician B only
Both Technicians A and B
Neither Technician A nor B
Technician B only - - -
correct answer ✅Technician A says proper starter operation
depends on the battery being at a 95% charge and battery cables
being of the correct size (gauge) and having no more than 0.8-volt
drop.
Technician B says voltage-drop testing includes cranking the engine,
measuring the drop in voltage from the battery to the starter, and
measuring the drop in voltage from the negative terminal of the
battery to the engine block.
Who is right?
Technician A only
Technician B only
Both Technicians A and B
Systems) Exam Questions And Answers
Technician A only - - -
correct answer ✅A technician connects one lead of a DMM (digital
multimeter) to the positive (+) terminal of a battery and the other
meter lead to the "B" terminal of the starter solenoid and then
cranks the engine. During cranking, the voltmeter displays a reading
of 878 mV.
Technician A says this reading indicates the positive battery cable
has very high resistance.
Technician B says this reading indicates that the starter armature is
defective.
Who is right?
Technician A only
Technician B only
Both Technicians A and B
Neither Technician A nor B
,ASE A6 Test Prep (Electrical & Electronic
Systems) Exam Questions And Answers
Replace the battery - - -
correct answer ✅When performing a load test on a battery, a
technician finds that the battery voltage drops below specifications.
Which of the following is the MOST likely repair?
a. Recharge the battery and return it to service
b. Recharge the battery and retest it
c. Replace the battery
d. Replace the voltage regulator
Technician A only - - -
correct answer ✅Two technicians are describing battery charging.
Technician A says to remove the surface charge from a recently
charged battery and apply a 300-ampere load across the adapters
for 15 seconds.
Technician B says to remove the surface charge from batteries,
which have been in storage.
Who is right?
,ASE A6 Test Prep (Electrical & Electronic
Systems) Exam Questions And Answers
Technician A only
Technician B only
Both Technicians A and B
Neither Technician A nor B
Technician A only - - -
correct answer ✅A technician connects one lead of a DMM (digital
multimeter) to the positive (+) terminal of a battery and the other
meter lead to the "B" terminal of the starter solenoid and then
cranks the engine. During cranking, the voltmeter displays a reading
of 878 mV.
Technician A says this reading indicates the positive battery cable
has very high resistance.
Technician B says this reading indicates that the starter armature is
defective.
Who is right?
, ASE A6 Test Prep (Electrical & Electronic
Systems) Exam Questions And Answers
Technician A only
Technician B only
Both Technicians A and B
Neither Technician A nor B
Technician B only - - -
correct answer ✅Technician A says proper starter operation
depends on the battery being at a 95% charge and battery cables
being of the correct size (gauge) and having no more than 0.8-volt
drop.
Technician B says voltage-drop testing includes cranking the engine,
measuring the drop in voltage from the battery to the starter, and
measuring the drop in voltage from the negative terminal of the
battery to the engine block.
Who is right?
Technician A only
Technician B only
Both Technicians A and B
