TTT 1 EXAM (2025) ACTUAL EXAM comprehensive questions and
verified accurate solution (Detailed & Elaborated) |get it 100%
accurate!! 2025 TEST!!
What are the three main components that make up a fall arrest system?
#$%^& -
(ANSWERS)Anchorage, Full body harness, and Attachments
Who is responsible for ensuring the General Duty Clause when OSHA has not yet publicized the
specific regulations? - (ANSWERS)Employer
When should safety glasses be worn? - (ANSWERS)When grinding steel
Monopole components are identified as: - (ANSWERS)Base Flange
The following term is used to describe rules written by the Department of Labor: -
(ANSWERS)Regulations
Which government organization regulates tower lighting? - (ANSWERS)FAA
What does the person operating the Capstan need a clear view of? - (ANSWERS)The load and
signal person
T/F: You should use a carabiner when lifting loads? - (ANSWERS)False
The four most common types of structures used to support antennas are: - (ANSWERS)Self-
Supporting, Monopoles, Guyed, and Non-Standard
T/F: All antennas should be considered active? - (ANSWERS)True
The following piece of equipment can be used to power an electric Capstan when an electrical
outlet is not available: - (ANSWERS)Generator
What is the heel block used for? - (ANSWERS)To change the direction of the load, jump or tag
line from horizontal to vertical
The vehicle mounted capstan should be moved as close as possible to the __________ once the
lifting path is determined. - (ANSWERS)Lifting staging area
T/F: A safe practice is to stay 6 feet or more away from an active antenna - (ANSWERS)True
What is the most common power source used with a Capstan Hoist? - (ANSWERS)Electrical
power
When using an extension ladder, how many feet past the platform must the ladder extend? -
(ANSWERS)3 feet
, TTT 1 EXAM (2025) ACTUAL EXAM comprehensive questions and
verified accurate solution (Detailed & Elaborated) |get it 100%
accurate!! 2025 TEST!!
#$%^&
A Capstan hoist should be inspected __________ before use? - (ANSWERS)Daily
A vertical life line should have a minimum breaking strength of how many pounds? -
(ANSWERS)5,000 lbs
What do the letters LOTO stand for? - (ANSWERS)Lockout Tagout
T/F: Due to the resonance frequency and the high power of broadcast antennas, overexposure
is almost always a problem. - (ANSWERS)True
T/F: An RF monitor should be worn in areas of unknown RF exposure. - (ANSWERS)True
The minimum force that a work positioning system anchorage must be able to withstand is: -
(ANSWERS)2 time the arresting force of 3,000 lbs.
If the wire rope load on a base mounted hoist has a breaking strength of 20,500 pounds, what
is the actual working load limit? - (ANSWERS)4,100 lbs.
In the fall protection, the term __________ is used for stopping a free fall. - (ANSWERS)Fall arrest
T/F: The outer sheath of a synthetic endless sling is part of the slings strength - (ANSWERS)False
According to industry standards, the minimum height from a lower surface or ground where fall
protection must be used is: - (ANSWERS)6 feet
What is the Factor of Safety specified for rigging equipment-hooks, shackles and slings? -
(ANSWERS)5 to 1
What is the factor of safety specified for synthetic rope? - (ANSWERS)10 to 1
Exposure to nonionizing radiation does what to the human body? - (ANSWERS)Does not
permanently change cells
The bridle slings on the pole perform what function? - (ANSWERS)Supports the pole vertically
and carries all the horizontal load
If the wire rope load line on a base mounted hoist has a breaking strength of 21,500 lbs., what
is the actual working load limit when lifting personnel? - (ANSWERS)2,150 lbs.
verified accurate solution (Detailed & Elaborated) |get it 100%
accurate!! 2025 TEST!!
What are the three main components that make up a fall arrest system?
#$%^& -
(ANSWERS)Anchorage, Full body harness, and Attachments
Who is responsible for ensuring the General Duty Clause when OSHA has not yet publicized the
specific regulations? - (ANSWERS)Employer
When should safety glasses be worn? - (ANSWERS)When grinding steel
Monopole components are identified as: - (ANSWERS)Base Flange
The following term is used to describe rules written by the Department of Labor: -
(ANSWERS)Regulations
Which government organization regulates tower lighting? - (ANSWERS)FAA
What does the person operating the Capstan need a clear view of? - (ANSWERS)The load and
signal person
T/F: You should use a carabiner when lifting loads? - (ANSWERS)False
The four most common types of structures used to support antennas are: - (ANSWERS)Self-
Supporting, Monopoles, Guyed, and Non-Standard
T/F: All antennas should be considered active? - (ANSWERS)True
The following piece of equipment can be used to power an electric Capstan when an electrical
outlet is not available: - (ANSWERS)Generator
What is the heel block used for? - (ANSWERS)To change the direction of the load, jump or tag
line from horizontal to vertical
The vehicle mounted capstan should be moved as close as possible to the __________ once the
lifting path is determined. - (ANSWERS)Lifting staging area
T/F: A safe practice is to stay 6 feet or more away from an active antenna - (ANSWERS)True
What is the most common power source used with a Capstan Hoist? - (ANSWERS)Electrical
power
When using an extension ladder, how many feet past the platform must the ladder extend? -
(ANSWERS)3 feet
, TTT 1 EXAM (2025) ACTUAL EXAM comprehensive questions and
verified accurate solution (Detailed & Elaborated) |get it 100%
accurate!! 2025 TEST!!
#$%^&
A Capstan hoist should be inspected __________ before use? - (ANSWERS)Daily
A vertical life line should have a minimum breaking strength of how many pounds? -
(ANSWERS)5,000 lbs
What do the letters LOTO stand for? - (ANSWERS)Lockout Tagout
T/F: Due to the resonance frequency and the high power of broadcast antennas, overexposure
is almost always a problem. - (ANSWERS)True
T/F: An RF monitor should be worn in areas of unknown RF exposure. - (ANSWERS)True
The minimum force that a work positioning system anchorage must be able to withstand is: -
(ANSWERS)2 time the arresting force of 3,000 lbs.
If the wire rope load on a base mounted hoist has a breaking strength of 20,500 pounds, what
is the actual working load limit? - (ANSWERS)4,100 lbs.
In the fall protection, the term __________ is used for stopping a free fall. - (ANSWERS)Fall arrest
T/F: The outer sheath of a synthetic endless sling is part of the slings strength - (ANSWERS)False
According to industry standards, the minimum height from a lower surface or ground where fall
protection must be used is: - (ANSWERS)6 feet
What is the Factor of Safety specified for rigging equipment-hooks, shackles and slings? -
(ANSWERS)5 to 1
What is the factor of safety specified for synthetic rope? - (ANSWERS)10 to 1
Exposure to nonionizing radiation does what to the human body? - (ANSWERS)Does not
permanently change cells
The bridle slings on the pole perform what function? - (ANSWERS)Supports the pole vertically
and carries all the horizontal load
If the wire rope load line on a base mounted hoist has a breaking strength of 21,500 lbs., what
is the actual working load limit when lifting personnel? - (ANSWERS)2,150 lbs.
