RVTI TEST TWO QUESTIONS WITH ACTUAL ANSWERS {100% CORRECT} RATED A+ 100% DISTINCTION GUARANTEE.

RVTI TEST TWO The barbed fitting on the test device) When performing a lockup test the manometer should be connected to? Pointing down A two stage regulator must be connected with the vent opening of the second stage pointing towards? Weight of the container What is tare weight Timed pressure drop What is the most common test for propane leaks? Gallons of water capacity WC 47.7 on DOT cylinder means? Open When performing a lockup test the propane valve should be? Temperature of the pipes changing During an operating pressure test the manometer fluctuating up and down is an indicator of what? The current (amps) Clamp on ammeter is used to determine what in a running motor? You could get shocked if you do positive first Disconnect negative battery terminal first because? Once a month How often should carbon monoxide alarms be tested VSetting on the multimeter for dc voltage Solid conductors are used in? Loose connections can cause all of the following except? Fuse What protects from too much current? 6 gauge wire with 50 amp OCP What is not correct What is the function of an EMS system Spark producing devices should not be near battery because? Negative value on VOM indicates?