100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached 4.2 TrustPilot
logo-home
Exam (elaborations)

ICC Reinforced concrete Q & A

Rating
-
Sold
-
Pages
10
Grade
A+
Uploaded on
21-05-2025
Written in
2024/2025

ICC Reinforced concrete Q & A reinforced concrete - Correct Answer - Concrete in which steel reinforcement is embedded in such a manner that the two materials act together in resisting forces. Also called beton arme,ferro concrete Reinforcement - Correct Answer - System of steel bars, strength or wires for absorbing stensile, shearing and sometimes the compressive stresses in a concrete member or structure Reinforcing bar - Correct Answer - Steel bar for enforcing concrete, usually specified by the number equivalent to its diameter in eight of an inch. Also called rebar Deform bar - Correct Answer - Reinforcing bar hot rolled with surface deformations to develop greater bond with concrete Tension reinforcement - Correct Answer - Rainforcement designed to absorb tensile stresses Compression reinforcement - Correct Answer - Reinforcement designed to absorb compressive stresses Effective depth - Correct Answer - The depth of concrete section measured from compression face to the centroid of the tension reinforcement Bar spacing - Correct Answer - The center to center spacing of parallel reinforcing bar, resulting clear distance between the bar being regula ted by bar diameter, maximum size of coarse aggregate, and thickness of the concrete section Cover - Correct Answer - The amount of concrete required to protect steel reinforcement from fire and corrosion, measured from surface to the reinforcement to the outer surface of the concrete section Bond - Correct Answer - The adhesion between two substances such as concrete and reinforcing bars bond stress - Correct Answer - The adhesive force per unit area of contact between the rain forcing bar in the surrounding concrete developed at any section of a flexural a member Plain concrete - Correct Answer - Concrete having no enforcement or reinforced only for drying shrinkage or thermal stresses Ferrocement - Correct Answer - Constructed of cement and mortar over a wire mesh that has been pre shape over a mold

Show more Read less
Institution
ICC REINFORCED CONCRETE
Course
ICC REINFORCED CONCRETE









Whoops! We can’t load your doc right now. Try again or contact support.

Written for

Institution
ICC REINFORCED CONCRETE
Course
ICC REINFORCED CONCRETE

Document information

Uploaded on
May 21, 2025
Number of pages
10
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers

Subjects

Content preview

ICC Reinforced concrete Q & A
reinforced concrete - Correct Answer - Concrete in which steel reinforcement is embedded in
such a manner that the two materials act together in resisting forces. Also called beton
arme,ferro concrete

Reinforcement - Correct Answer - System of steel bars, strength or wires for absorbing stensile,
shearing and sometimes the compressive stresses in a concrete member or structure

Reinforcing bar - Correct Answer - Steel bar for enforcing concrete, usually specified by the
number equivalent to its diameter in eight of an inch. Also called rebar

Deform bar - Correct Answer - Reinforcing bar hot rolled with surface deformations to develop
greater bond with concrete

Tension reinforcement - Correct Answer - Rainforcement designed to absorb tensile stresses

Compression reinforcement - Correct Answer - Reinforcement designed to absorb compressive
stresses

Effective depth - Correct Answer - The depth of concrete section measured from compression
face to the centroid of the tension reinforcement

Bar spacing - Correct Answer - The center to center spacing of parallel reinforcing bar, resulting
clear distance between the bar being regula ted by bar diameter, maximum size of coarse
aggregate, and thickness of the concrete section

Cover - Correct Answer - The amount of concrete required to protect steel reinforcement from
fire and corrosion, measured from surface to the reinforcement to the outer surface of the
concrete section

Bond - Correct Answer - The adhesion between two substances such as concrete and
reinforcing bars

bond stress - Correct Answer - The adhesive force per unit area of contact between the rain
forcing bar in the surrounding concrete developed at any section of a flexural a member

Plain concrete - Correct Answer - Concrete having no enforcement or reinforced only for drying
shrinkage or thermal stresses

Ferrocement - Correct Answer - Constructed of cement and mortar over a wire mesh that has
been pre shape over a mold

, Cracked section - Correct Answer - Concrete section design or analyzed on the assumption that
concrete has no resistance to tensile stresses

Cracking load - Correct Answer - The load that causes the tensile stresses in a concrete
member to exceed the tensile strength of the concrete

Effective area of concrete - Correct Answer - The area of a concrete section between the
compression face in the centroid of the tension reinforcement

Effective area of reinforcement - Correct Answer - The product of the right cross sectional area
of reinforcement in the cosine of the angle between the direction in the direction for which its
effectiveness is considered

percentage reinforcement - Correct Answer - The ratio of effective area of reinforcement
effective area of concrete at any section of a reinforced concrete member, expressed as a
percentage

Embedment length - Correct Answer - the length of embedded reinforcement provided beyond a
critical section for Anchorage

hook - Correct Answer - A bend or curve given to the end of a tension bar to develop an
equivalent embedment length, used where there is insufficient room to develop an adequate
embedment length

Standard hook - Correct Answer - 90 degrees, 135 degrees, or 180° been made at the end of a
reinforcing bar according to industry standards with a radius based on the bar diameter

fiber reinforced concrete - Correct Answer - Concrete reinforced with this purse, randomly
oriented fiber of glass or plastic

GFRC - Correct Answer - Abbreviation for glass fiber reinforced concrete

Welded wire fabric - Correct Answer - a grid of longitudinal and transverse steel wires or bars
welded together at all points of intersection, usually specified by the size of the grid in inches in
the wire gauge. Also called welded wire mesh

woven wire fabric - Correct Answer - A mesh of cold rolled steel wire mechanically twisted
together to form hexagonally shaped openings

Balance section - Correct Answer - a concrete section in which this the tension reinforcement
theoretically reaches its specified yield strength of the concrete in compression pictures it's
assumed ultimate stream
$8.49
Get access to the full document:

100% satisfaction guarantee
Immediately available after payment
Both online and in PDF
No strings attached

Get to know the seller
Seller avatar
gurutech

Get to know the seller

Seller avatar
gurutech Teachme2-tutor
View profile
Follow You need to be logged in order to follow users or courses
Sold
0
Member since
7 months
Number of followers
0
Documents
63
Last sold
-

0.0

0 reviews

5
0
4
0
3
0
2
0
1
0

Recently viewed by you

Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Frequently asked questions