Technical Rescue I Rope Rescue
Questions and Answers Latest Version
Already Passed
What is the primary purpose of a rope rescue in technical rescue operations?
✔✔To safely access, stabilize, and remove victims from high-angle or difficult terrain
environments.
Why is it important to inspect rope before every rescue operation?
✔✔Because damaged or worn rope can fail under load, compromising safety.
What is the difference between static and dynamic rope in rescue scenarios?
✔✔Static rope has low stretch and is used for hauling and positioning, while dynamic rope
stretches to absorb shock, often used in climbing.
What is the ideal knot for creating a secure loop at the end of a rope?
✔✔The Figure Eight Follow Through knot is ideal for secure loop creation.
Why should anchors be assessed carefully before attaching a rope system?
1
,✔✔Because a weak or unstable anchor can fail, leading to system collapse.
What role does a belayer play in rope rescue?
✔✔A belayer manages the rope to control movement and prevent falls during rescue.
How do you properly communicate with team members during a rope rescue?
✔✔Use standardized signals or radios to ensure clear and precise communication.
What is the purpose of a mechanical advantage system in rope rescue?
✔✔To multiply force, making it easier to lift or haul heavy loads.
Why is personal protective equipment critical during rope rescue?
✔✔It protects rescuers from falls, debris, and environmental hazards.
What is a ‘bight’ in rope terminology?
✔✔A bight is a curved section or loop of rope, without crossing itself.
How can you prevent rope damage from sharp edges during rescue?
2
, ✔✔Use edge protection such as padding or rope sleeves at contact points.
What is a common method to secure a victim during a rope rescue?
✔✔Using a rescue harness connected with carabiners and knots for safety.
Why is redundancy important in rope rescue systems?
✔✔Redundancy provides backup in case one component fails, enhancing safety.
What is the function of a prusik knot in rope rescue?
✔✔It acts as a friction hitch to grip the rope and can be used for ascending or backup.
How do you calculate the minimum breaking strength required for rescue rope?
✔✔Consider the weight of the load, dynamic forces, and safety factors per standards.
What should be done if a rope becomes wet during a rescue operation?
✔✔Allow it to dry thoroughly before reuse and inspect for damage.
Why is it important to avoid rope twists during setup?
3
Questions and Answers Latest Version
Already Passed
What is the primary purpose of a rope rescue in technical rescue operations?
✔✔To safely access, stabilize, and remove victims from high-angle or difficult terrain
environments.
Why is it important to inspect rope before every rescue operation?
✔✔Because damaged or worn rope can fail under load, compromising safety.
What is the difference between static and dynamic rope in rescue scenarios?
✔✔Static rope has low stretch and is used for hauling and positioning, while dynamic rope
stretches to absorb shock, often used in climbing.
What is the ideal knot for creating a secure loop at the end of a rope?
✔✔The Figure Eight Follow Through knot is ideal for secure loop creation.
Why should anchors be assessed carefully before attaching a rope system?
1
,✔✔Because a weak or unstable anchor can fail, leading to system collapse.
What role does a belayer play in rope rescue?
✔✔A belayer manages the rope to control movement and prevent falls during rescue.
How do you properly communicate with team members during a rope rescue?
✔✔Use standardized signals or radios to ensure clear and precise communication.
What is the purpose of a mechanical advantage system in rope rescue?
✔✔To multiply force, making it easier to lift or haul heavy loads.
Why is personal protective equipment critical during rope rescue?
✔✔It protects rescuers from falls, debris, and environmental hazards.
What is a ‘bight’ in rope terminology?
✔✔A bight is a curved section or loop of rope, without crossing itself.
How can you prevent rope damage from sharp edges during rescue?
2
, ✔✔Use edge protection such as padding or rope sleeves at contact points.
What is a common method to secure a victim during a rope rescue?
✔✔Using a rescue harness connected with carabiners and knots for safety.
Why is redundancy important in rope rescue systems?
✔✔Redundancy provides backup in case one component fails, enhancing safety.
What is the function of a prusik knot in rope rescue?
✔✔It acts as a friction hitch to grip the rope and can be used for ascending or backup.
How do you calculate the minimum breaking strength required for rescue rope?
✔✔Consider the weight of the load, dynamic forces, and safety factors per standards.
What should be done if a rope becomes wet during a rescue operation?
✔✔Allow it to dry thoroughly before reuse and inspect for damage.
Why is it important to avoid rope twists during setup?
3
