100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached 4.6 TrustPilot
logo-home
Exam (elaborations)

CWEA Environmental Compliance Exam Questions And Answers 100% Pass

Rating
-
Sold
-
Pages
34
Grade
A+
Uploaded on
15-05-2025
Written in
2024/2025

CWEA Environmental Compliance Exam Questions And Answers 100% Pass An industry operating an 8-hour shift, 5 days per week, generates 100,000 gallons of wastewater per shift. Their pretreatment system has a capacity of 150 gallons per minute. How long must the pretreatment facility operate to process the wastewater generated each day? - ANS 11.1 hours An industry has five sewer connections with the following discharge rates: 1) 300 gpd, 2) 75 gpd, 3) 725 gpd, 4) 1,200 gpd, 5) 200 gpd A flow-weighted composite sample of 5 liters is desired. How many milliliters of sample from each connection should be composited? - ANS 600, 150, 1450, 2400, 400 Prohibited discharges from industrial users to POTWs, as stipulated in the Clean Water Act, are pollutants that: - ANS create a fire or explosion hazard in the sewer or POTW. "MSDS" is an acronym for what? - ANS Material Safety Data Sheet Safety hazards associated with hydrogen sulfide in sewer systems include: - ANS toxic gasses. A significant industrial user can be defined as: - ANS a federal categorical industrial user. Lead acetate paper is used to determine the presence of: - ANS hydrogen sulfide. ©EVERLY 2025 ALL RIGHTS RESERVED What is the average detention time, in minutes, for a 40,000 gpd flow going through a 1,500- gallon interceptor? - ANS 54 minutes The following type of flow measuring device can be installed in a pipe flowing full: - ANS Venturi. What total volume of spill containment capacity in gallons is needed for the following tanks if a 12-inch rainfall occurs during a 24-hour period on a common 200-foot by 200-foot spill- containment pad? Assume 100 percent containment of all tank capacity is needed. Tank I: Cube, 6 ft wide, 6 ft long, and 6 ft high. Tank II: Rectangular, 4 ft wide, 20 ft long, and 3 ft high. Tank III: Cylindrical, 8 ft in diameter and 9 ft high. - ANS 305,992 gallons An industry has a wastewater discharge of 10,000 gallons per day containing 5 mg/L of copper. What is the industry's mass emission rate of copper in pounds per day? - ANS 0.42 lb/day What kind of container and preservative is required for samples to be analyzed for oil and grease? - ANS Glass, Cool 4°C, H2SO4 to pH<2 A chain-of-custody form: - ANS is the ability to trace sample possession and handling from collection through analysis. The BOD determination is an empirical test in which standardized laboratory procedures are used to: - ANS determine the relative oxygen requirements of wastewaters, effluents, and polluted waters. A confined space is one that: - ANS is large enough to enter and work in, has a restricted entry/exit, and is not meant for continuous occupancy. Industrial plants producing wastes with a high suspended solids content include: - ANS breweries. ©EVERLY 2025 ALL RIGHTS RESERVED Whenever an inspector or sampling technician is in a manhole, how many people should there be above to respond in the event of an emergency? - ANS Two Alkalinity is reported as: - ANS alkalinity, mg/L CaCO3. What is the normality of sodium hydroxide (NaOH) solution of 25 mL if a 0.01 N sulfuric acid solution neutralizes 100 mL of the NaOH solution? - ANS 0.0025 N A major pollutant of concern from a printed circuit board shop is: - ANS copper. To find the proper protective gear to use while inspecting an area where a hazardous chemical is used, you would: - ANS check the MSDS for chemicals used. Why are gasoline and volatile solvents objectionable when present in a sewer? - ANS They can produce an explosion hazard. When inspecting a plating shop, personal protective equipment would include: - ANS eye goggles or face shield, chemical resistant gloves, and overalls. A solution with a pH of 5 has a concentration of hydrogen ions that is how many times higher than a solution with a pH of 7? - ANS 100 times higher High pH wastewater is neutralized by adding: - ANS H2SO4. When working in the street, signs and cones are needed when: - ANS over half of the street is blocked. What is the danger of asphyxiation set point for oxygen on an atmospheric monitor? - ANS 19.5 percent

Show more Read less
Institution
CWEA Environmental Compliance
Course
CWEA Environmental Compliance











Whoops! We can’t load your doc right now. Try again or contact support.

Written for

Institution
CWEA Environmental Compliance
Course
CWEA Environmental Compliance

Document information

Uploaded on
May 15, 2025
Number of pages
34
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers

Subjects

Content preview

©EVERLY 2025 ALL RIGHTS RESERVED




CWEA Environmental Compliance Exam
Questions And Answers 100% Pass



An industry operating an 8-hour shift, 5 days per week, generates 100,000 gallons of
wastewater per shift. Their pretreatment system has a capacity of 150 gallons per minute. How
long must the pretreatment facility operate to process the wastewater generated each day? -
ANS 11.1 hours


An industry has five sewer connections with the following discharge rates: 1) 300 gpd, 2) 75
gpd, 3) 725 gpd, 4) 1,200 gpd, 5) 200 gpd A flow-weighted composite sample of 5 liters is
desired. How many milliliters of sample from each connection should be composited? -
ANS 600, 150, 1450, 2400, 400


Prohibited discharges from industrial users to POTWs, as stipulated in the Clean Water Act, are
pollutants that: - ANS create a fire or explosion hazard in the sewer or POTW.



"MSDS" is an acronym for what? - ANS Material Safety Data Sheet



Safety hazards associated with hydrogen sulfide in sewer systems include: - ANS toxic gasses.



A significant industrial user can be defined as: - ANS a federal categorical industrial user.



Lead acetate paper is used to determine the presence of: - ANS hydrogen sulfide.

, ©EVERLY 2025 ALL RIGHTS RESERVED


What is the average detention time, in minutes, for a 40,000 gpd flow going through a 1,500-
gallon interceptor? - ANS 54 minutes


The following type of flow measuring device can be installed in a pipe flowing full: -
ANS Venturi.


What total volume of spill containment capacity in gallons is needed for the following tanks if a
12-inch rainfall occurs during a 24-hour period on a common 200-foot by 200-foot spill-
containment pad? Assume 100 percent containment of all tank capacity is needed. Tank I:
Cube, 6 ft wide, 6 ft long, and 6 ft high. Tank II: Rectangular, 4 ft wide, 20 ft long, and 3 ft high.
Tank III: Cylindrical, 8 ft in diameter and 9 ft high. - ANS 305,992 gallons


An industry has a wastewater discharge of 10,000 gallons per day containing 5 mg/L of copper.
What is the industry's mass emission rate of copper in pounds per day? - ANS 0.42 lb/day


What kind of container and preservative is required for samples to be analyzed for oil and
grease? - ANS Glass, Cool 4°C, H2SO4 to pH<2



A chain-of-custody form: - ANS is the ability to trace sample possession and handling from
collection through analysis.


The BOD determination is an empirical test in which standardized laboratory procedures are
used to: - ANS determine the relative oxygen requirements of wastewaters, effluents, and
polluted waters.



A confined space is one that: - ANS is large enough to enter and work in, has a restricted
entry/exit, and is not meant for continuous occupancy.


Industrial plants producing wastes with a high suspended solids content include: -
ANS breweries.

, ©EVERLY 2025 ALL RIGHTS RESERVED


Whenever an inspector or sampling technician is in a manhole, how many people should there
be above to respond in the event of an emergency? - ANS Two



Alkalinity is reported as: - ANS alkalinity, mg/L CaCO3.


What is the normality of sodium hydroxide (NaOH) solution of 25 mL if a 0.01 N sulfuric acid
solution neutralizes 100 mL of the NaOH solution? - ANS 0.0025 N



A major pollutant of concern from a printed circuit board shop is: - ANS copper.


To find the proper protective gear to use while inspecting an area where a hazardous chemical
is used, you would: - ANS check the MSDS for chemicals used.



Why are gasoline and volatile solvents objectionable when present in a sewer? - ANS They
can produce an explosion hazard.



When inspecting a plating shop, personal protective equipment would include: - ANS eye
goggles or face shield, chemical resistant gloves, and overalls.


A solution with a pH of 5 has a concentration of hydrogen ions that is how many times higher
than a solution with a pH of 7? - ANS 100 times higher



High pH wastewater is neutralized by adding: - ANS H2SO4.



When working in the street, signs and cones are needed when: - ANS over half of the street
is blocked.


What is the danger of asphyxiation set point for oxygen on an atmospheric monitor? -
ANS 19.5 percent

, ©EVERLY 2025 ALL RIGHTS RESERVED




A common technology to recover chemicals from rinse water include: - ANS ion exchange.



Is an essential part of any sampling quality control methodology: - ANS Proper cleaning
techniques for sampling equipment



What are the types of stormwater pollution? - ANS Sediment,BOD,Nutrients



How often must SIUs be inspected? - ANS Once a year


A solution of ferrous chloride used at a pretreatment facility contains 30 percent ferrous
chloride and has a density of 1.33 g/mL. How many grams of ferrous chloride are in one liter of
the solution? - ANS 399 grams per liter



Sodium hydroxide is commonly referred to as: - ANS caustic soda.


Which of the following does an ultrafiltration system remove from wastewater? -
ANS suspended solids.



Low pH wstewater is neutralized by adding: - ANS NaOH.


A solution with a pH of 5 has a concentration of hydrogen ions that is how many times higher
than a solution with a pH of 7? - ANS 100 times higher


What is the normality of a sodium hydroxide solution of 25 ml if 0.01 N sulfuric acid solution
neutralizes 100 mL of the NaOH solution? - ANS 0.0025 N

Get to know the seller

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
Everly Teachme2-tutor
View profile
Follow You need to be logged in order to follow users or courses
Sold
18
Member since
1 year
Number of followers
1
Documents
2796
Last sold
2 months ago
Study packs.

Find Quality Exam Materials made by professionals With A guaranteed A+

4.3

4 reviews

5
2
4
1
3
1
2
0
1
0

Recently viewed by you

Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Frequently asked questions