5/15/25, 11:10 AM CDFA Weight Verification Practice Questions ACTUAL EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE (A+ GRADED …
CDFA Weight Verification Practice Questions
ACTUAL EXAM QUESTIONS WITH COMPLETE
SOLUTION GUIDE (A+ GRADED 100% VERIFIED)
LATEST VERSION 2025!!
Save
Terms in this set (121)
Specifications are Manufacturers of devices
particularly directed to
Newly manufactured Class I, II, III, IIIL, or IIII
scales are required to be
designated as
The normal valance horizontal
position of the weighbeam
of a beam scale shall be
A county sealer/ director Different from regulations
of W&M may, with the
approval of the Secretary
of Food and Agriculture,
use a frequency of
inspection which is
https://quizlet.com/1044319738/cdfa-weight-verification-practice-questions-actual-exam-questions-with-complete-solution-guide-a-graded-100-verifie… 1/16
,5/15/25, 11:10 AM CDFA Weight Verification Practice Questions ACTUAL EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE (A+ GRADED …
On a prescription scale 0.04 inches
equipped with a balance
indicator, if this indicator
consists of an indicator
and a graduated scale and
they are not in the same
plane, the clearance
between the indicator and
the graduations shall not
be more than
Graduations of a scale they may be conveniently read
beam shall be so varied in
length that
A poise stop is not there is no zero graduation
necessary on a steelyard
when
The adjusting material in a brass
poise shall be securely
enclosed and firmly fixed
in position and it shall not
be in contact with the
weigh beam, if softer than
The sensitivity requirement regardless of maintenance and acceptance
of a scale shall be applied tolerances
in conjunction with
A variable frequency regular frequency, variable frequency and statistical
inspection plan shall sampling procedure
provide for testing of all
commercial devices on
https://quizlet.com/1044319738/cdfa-weight-verification-practice-questions-actual-exam-questions-with-complete-solution-guide-a-graded-100-verifie… 2/16
, 5/15/25, 11:10 AM CDFA Weight Verification Practice Questions ACTUAL EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE (A+ GRADED …
Each weighing device Name, initials or trademark of the manufacturer or
shall have a minimum of distributor, model number, and non repetitive serial
one permanent and number
conspicuous identification
marking with what
information
distance from the center of one graduation to the
The graduated interval is
center of the next graduation in a graduated series
Only enforceable with respect to devices made after
non retroactive means
implimentation
Meat beams, steelyards, identical
portable platform, and
belt conveyor scales all
have a frequency of
inspection which is
An axle load scale is permanently installed
normally
what term does not apply range
to nose iron
The term nominal when intended or stated value
used in reference to a
scale, measure, weight,
etc. means
A tare mechanism is used balancing out the weight of empty containers
primarily for the purpose
of
the director may issue device repairmen, accuracy of commercial devices,
rules and regulations for and responsibilities of device repairmen
To perform a shift test on 18 grams
a dairy product test scale
the necessary test weight
load is
https://quizlet.com/1044319738/cdfa-weight-verification-practice-questions-actual-exam-questions-with-complete-solution-guide-a-graded-100-verifie… 3/16
CDFA Weight Verification Practice Questions
ACTUAL EXAM QUESTIONS WITH COMPLETE
SOLUTION GUIDE (A+ GRADED 100% VERIFIED)
LATEST VERSION 2025!!
Save
Terms in this set (121)
Specifications are Manufacturers of devices
particularly directed to
Newly manufactured Class I, II, III, IIIL, or IIII
scales are required to be
designated as
The normal valance horizontal
position of the weighbeam
of a beam scale shall be
A county sealer/ director Different from regulations
of W&M may, with the
approval of the Secretary
of Food and Agriculture,
use a frequency of
inspection which is
https://quizlet.com/1044319738/cdfa-weight-verification-practice-questions-actual-exam-questions-with-complete-solution-guide-a-graded-100-verifie… 1/16
,5/15/25, 11:10 AM CDFA Weight Verification Practice Questions ACTUAL EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE (A+ GRADED …
On a prescription scale 0.04 inches
equipped with a balance
indicator, if this indicator
consists of an indicator
and a graduated scale and
they are not in the same
plane, the clearance
between the indicator and
the graduations shall not
be more than
Graduations of a scale they may be conveniently read
beam shall be so varied in
length that
A poise stop is not there is no zero graduation
necessary on a steelyard
when
The adjusting material in a brass
poise shall be securely
enclosed and firmly fixed
in position and it shall not
be in contact with the
weigh beam, if softer than
The sensitivity requirement regardless of maintenance and acceptance
of a scale shall be applied tolerances
in conjunction with
A variable frequency regular frequency, variable frequency and statistical
inspection plan shall sampling procedure
provide for testing of all
commercial devices on
https://quizlet.com/1044319738/cdfa-weight-verification-practice-questions-actual-exam-questions-with-complete-solution-guide-a-graded-100-verifie… 2/16
, 5/15/25, 11:10 AM CDFA Weight Verification Practice Questions ACTUAL EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE (A+ GRADED …
Each weighing device Name, initials or trademark of the manufacturer or
shall have a minimum of distributor, model number, and non repetitive serial
one permanent and number
conspicuous identification
marking with what
information
distance from the center of one graduation to the
The graduated interval is
center of the next graduation in a graduated series
Only enforceable with respect to devices made after
non retroactive means
implimentation
Meat beams, steelyards, identical
portable platform, and
belt conveyor scales all
have a frequency of
inspection which is
An axle load scale is permanently installed
normally
what term does not apply range
to nose iron
The term nominal when intended or stated value
used in reference to a
scale, measure, weight,
etc. means
A tare mechanism is used balancing out the weight of empty containers
primarily for the purpose
of
the director may issue device repairmen, accuracy of commercial devices,
rules and regulations for and responsibilities of device repairmen
To perform a shift test on 18 grams
a dairy product test scale
the necessary test weight
load is
https://quizlet.com/1044319738/cdfa-weight-verification-practice-questions-actual-exam-questions-with-complete-solution-guide-a-graded-100-verifie… 3/16
