CWB LEVEL 1 Text Book Review Exam
Questions with 100% Correct Answers
Latest Versions 2025 Graded A+
WHAT ARE THE 2 TYPES OF CORNER JOINTS - CORRECT ANSWER -OPEN
-CLOSED
WHAT ARE THE MORE COMMON TYPES OF WELDS - CORRECT ANSWER -
SURFACING (bead) WELDS
-TACK WELDS
-EDGE WELDS
-PLUG AND SLOT WELDS
-FILLET WELDS
-GROOVE WELDS
WHAT IS CLADDING - CORRECT ANSWER -CREATING A CORROSION-RESISTANT
OR HEAT-RESISTANT LAYER
WHAT IS THE MOST COMMON TYPE OF WELD - CORRECT ANSWER -FILLET
WELD
A IS A WELD THAT JOINS 2 SURFACES THAT ARE
ROUGHLY PERPENDICULAR TO EACH OTHER - CORRECT ANSWER FILLET WELD
,THE STRENGTH OF A FILLET WELD IS GOVERNED BY THE EFFECTIVE
THICKNESS - CORRECT ANSWER -THROAT THICKNESS
WHAT IS THROAT THICKNESS - CORRECT ANSWER -THE SHORTEST DISTANCE
FROM THE ROOT OF THE WELD TO ITS FACE, LESS ANY CONVEXITY
WHAT ARE THE 4 BASIC WELDING POSITIONS - CORRECT ANSWER -FLAT
-HORIZONTAL
-VERTICAL
-OVERHEAD
WHAT WELD POSITION IS NUMBER 1 - CORRECT ANSWER FLAT
WHAT WELD POSITION IS NUMBER 2 - CORRECT ANSWER HORIZONTAL
WHAT WELD POSITION IS NUMBER 3 - CORRECT ANSWER VERTICAL
WHAT WELD POSITION IS NUMBER 4 - CORRECT ANSWER OVERHEAD
WHAT WELD POSITION IS NUMBER 5 - CORRECT ANSWER AXIS OF PIPE FIXED
AT THE HORIZONTAL
WHAT WELD POSITION IS NUMBER 6 - CORRECT ANSWER AXIS OF PIPE FIXED
AT A 45° INCLINE
NAME THE TYPE OF WELDS AND WHAT POSITION IT IS TO BE WELDED IN
,- 1G
- 3F
- 4G
- 5G - CORRECT ANSWER 1G - GROOVE WELD IN FLAT POSITION
3F - FILLET WELD IN VERTICAL POSITION
4G - GROOVE WELD IN OVERHEAD POSITION
5G - GROOVE WELD WITH AXIS OF PIPE FIXED IN HORIZONTAL POSITION
WHAT POSITIONS CAN SMAW (shield metal arc welding) be used - CORRECT
ANSWER SMAW CAN BE USED IN ALL POSITIONS
WHAT WELDING TECHNIQUE CAN BE USED IN ALL POSITIONS - CORRECT
ANSWER SMAW (shield metal arc welding)
THE DIAMETER OF THE ELECTRODE OR WIRE IS CHOSEN BASED ON WHAT -
CORRECT ANSWER -THE SIZE OF THE GROOVE ANGLE
GROOVE WELDS CAN BE CLASSIFIED IN TWO WAYS. WHAT ARE THEY - CORRECT
ANSWER -SHAPE
-EFFICIENCY
WHAT ARE THE BASIC 3 FORMS OF EDGE PREPARATION - CORRECT ANSWER -
SQUARE
-BEVEL
- J PROFILE
, IN ALL CASES, THE MINIMUM ROOT OPENING IS OF THE
PLATE THICKNESS TO A MAXIMUM OF ? - CORRECT
ANSWER MINIMUM ROOT OPENING IS HALF OF THE PLATE THICKNESS TO A
MAXIMUM OF 5mm
WHAT IS CONSIDERED THE QUICKEST AND CHEAPEST METHOD OF PREPARING
STRAIGHT EDGES ON A PLATE UP TO 20mm THICK - CORRECT ANSWER
SHEARING
Which level of government created the Workplace Hazardous Materials
Information System (WHMIS)? - CORRECT ANSWER FEDERAL
Which type of radiation from an electric welding arc can cause reddening and
burning of the skin? - CORRECT ANSWER Ultraviolet light.
In a chronic reaction, symptoms: - CORRECT ANSWER develop and appear over
a period of time.
Which type of hazard control is the most effective? - CORRECT ANSWER
Engineering.
In projection, the front view always goes in the bottom left-
hand corner of the drawing. - CORRECT ANSWER orthographic
In an orthographic drawing, the top view and right-side view are placed equal
distances from the front view.
true or false - CORRECT ANSWER true
Questions with 100% Correct Answers
Latest Versions 2025 Graded A+
WHAT ARE THE 2 TYPES OF CORNER JOINTS - CORRECT ANSWER -OPEN
-CLOSED
WHAT ARE THE MORE COMMON TYPES OF WELDS - CORRECT ANSWER -
SURFACING (bead) WELDS
-TACK WELDS
-EDGE WELDS
-PLUG AND SLOT WELDS
-FILLET WELDS
-GROOVE WELDS
WHAT IS CLADDING - CORRECT ANSWER -CREATING A CORROSION-RESISTANT
OR HEAT-RESISTANT LAYER
WHAT IS THE MOST COMMON TYPE OF WELD - CORRECT ANSWER -FILLET
WELD
A IS A WELD THAT JOINS 2 SURFACES THAT ARE
ROUGHLY PERPENDICULAR TO EACH OTHER - CORRECT ANSWER FILLET WELD
,THE STRENGTH OF A FILLET WELD IS GOVERNED BY THE EFFECTIVE
THICKNESS - CORRECT ANSWER -THROAT THICKNESS
WHAT IS THROAT THICKNESS - CORRECT ANSWER -THE SHORTEST DISTANCE
FROM THE ROOT OF THE WELD TO ITS FACE, LESS ANY CONVEXITY
WHAT ARE THE 4 BASIC WELDING POSITIONS - CORRECT ANSWER -FLAT
-HORIZONTAL
-VERTICAL
-OVERHEAD
WHAT WELD POSITION IS NUMBER 1 - CORRECT ANSWER FLAT
WHAT WELD POSITION IS NUMBER 2 - CORRECT ANSWER HORIZONTAL
WHAT WELD POSITION IS NUMBER 3 - CORRECT ANSWER VERTICAL
WHAT WELD POSITION IS NUMBER 4 - CORRECT ANSWER OVERHEAD
WHAT WELD POSITION IS NUMBER 5 - CORRECT ANSWER AXIS OF PIPE FIXED
AT THE HORIZONTAL
WHAT WELD POSITION IS NUMBER 6 - CORRECT ANSWER AXIS OF PIPE FIXED
AT A 45° INCLINE
NAME THE TYPE OF WELDS AND WHAT POSITION IT IS TO BE WELDED IN
,- 1G
- 3F
- 4G
- 5G - CORRECT ANSWER 1G - GROOVE WELD IN FLAT POSITION
3F - FILLET WELD IN VERTICAL POSITION
4G - GROOVE WELD IN OVERHEAD POSITION
5G - GROOVE WELD WITH AXIS OF PIPE FIXED IN HORIZONTAL POSITION
WHAT POSITIONS CAN SMAW (shield metal arc welding) be used - CORRECT
ANSWER SMAW CAN BE USED IN ALL POSITIONS
WHAT WELDING TECHNIQUE CAN BE USED IN ALL POSITIONS - CORRECT
ANSWER SMAW (shield metal arc welding)
THE DIAMETER OF THE ELECTRODE OR WIRE IS CHOSEN BASED ON WHAT -
CORRECT ANSWER -THE SIZE OF THE GROOVE ANGLE
GROOVE WELDS CAN BE CLASSIFIED IN TWO WAYS. WHAT ARE THEY - CORRECT
ANSWER -SHAPE
-EFFICIENCY
WHAT ARE THE BASIC 3 FORMS OF EDGE PREPARATION - CORRECT ANSWER -
SQUARE
-BEVEL
- J PROFILE
, IN ALL CASES, THE MINIMUM ROOT OPENING IS OF THE
PLATE THICKNESS TO A MAXIMUM OF ? - CORRECT
ANSWER MINIMUM ROOT OPENING IS HALF OF THE PLATE THICKNESS TO A
MAXIMUM OF 5mm
WHAT IS CONSIDERED THE QUICKEST AND CHEAPEST METHOD OF PREPARING
STRAIGHT EDGES ON A PLATE UP TO 20mm THICK - CORRECT ANSWER
SHEARING
Which level of government created the Workplace Hazardous Materials
Information System (WHMIS)? - CORRECT ANSWER FEDERAL
Which type of radiation from an electric welding arc can cause reddening and
burning of the skin? - CORRECT ANSWER Ultraviolet light.
In a chronic reaction, symptoms: - CORRECT ANSWER develop and appear over
a period of time.
Which type of hazard control is the most effective? - CORRECT ANSWER
Engineering.
In projection, the front view always goes in the bottom left-
hand corner of the drawing. - CORRECT ANSWER orthographic
In an orthographic drawing, the top view and right-side view are placed equal
distances from the front view.
true or false - CORRECT ANSWER true
