Solidworks CSWA Exam Questions With Passed
Solutions
1. Perpendicular at an angle of 90° to a given line, plane, or surface.
2. Plane Flat construction geometry. Can be used for a 2D sketch, section view of a
model, and others.
3. Vertex A point at which two or more lines or edges intersect. Can be selected
for
sketching, dimensioning, and many other operations.
4. Origin Appears as three gray arrows and represents the (0,0,0) coordinate of
the model.
5. Quadrant the four quarters of the coordinate plane
6. Diameter A straight line passing from side to side through the center of a circle or
sphere.
7. Radius A straight line from the center to the circumference of a circle or sphere.
8. Circumference the perimeter of a circle
9. Arc Part of a circle connecting two points on the circle.
10. Axis A straight line that can be used to create model geometry, features, or
patterns.
Can be made in a number of ditterent ways, including using the
intersection of two planes.
11. Symmetrical made up of exactly similar parts facing each other or around an axis
12. Parallel (of lines, planes, surfaces, or objects) side by side and having the same
distance continuously between them.
13. Tangent A line in the plane of a circle that intersects the circle in exactly one
point.
14. Filet An internal rounding of a corner or edge in a sketch, or an edge on a
surface or
1/
9
, Solidworks CSWA Exam Questions With Passed
Solutions
solid.
15. Chamfer Bevels a selected edge or vertex. Can be applied to both sketches and
features.
2/
9
Solutions
1. Perpendicular at an angle of 90° to a given line, plane, or surface.
2. Plane Flat construction geometry. Can be used for a 2D sketch, section view of a
model, and others.
3. Vertex A point at which two or more lines or edges intersect. Can be selected
for
sketching, dimensioning, and many other operations.
4. Origin Appears as three gray arrows and represents the (0,0,0) coordinate of
the model.
5. Quadrant the four quarters of the coordinate plane
6. Diameter A straight line passing from side to side through the center of a circle or
sphere.
7. Radius A straight line from the center to the circumference of a circle or sphere.
8. Circumference the perimeter of a circle
9. Arc Part of a circle connecting two points on the circle.
10. Axis A straight line that can be used to create model geometry, features, or
patterns.
Can be made in a number of ditterent ways, including using the
intersection of two planes.
11. Symmetrical made up of exactly similar parts facing each other or around an axis
12. Parallel (of lines, planes, surfaces, or objects) side by side and having the same
distance continuously between them.
13. Tangent A line in the plane of a circle that intersects the circle in exactly one
point.
14. Filet An internal rounding of a corner or edge in a sketch, or an edge on a
surface or
1/
9
, Solidworks CSWA Exam Questions With Passed
Solutions
solid.
15. Chamfer Bevels a selected edge or vertex. Can be applied to both sketches and
features.
2/
9
