Ref-B practice exam/ Questions & Expertly Verified
Answers, .
Terms in this set (260)
What is a jurisdiction? Each province and territory is its own jurisdiction
Explain the intent of the To give the director or administrator of the department or
regulation's governing the branch or government a means of evolving, within the
operation of boilers and framework of the intent of the act, to meet changes in
pressure equipment? technology, concept, and the use of those variables listed
within the scope of the act.
Is it more difficult to change The main or primary document is an "act" which must be
an act or a regulation? passed through the jurisdictional legislature. The act then
has "regulations" which are pursuant to the enforcement of
the act. These regulations are usually under the governance
of an official of the government rather than the actual
legislature. As a result, it is much easier to have changes
made to a regulation than it is to have changes made to an
act.
What jurisdictional item or Power engineers acts and regulations
legislation is most important
to a person interning time
make power engineering a
career choice?
CSA B51 and CSA B52
What two Canadian national
codes have been adopted by
all jurisdictions
,List some of the penalties The regulation will also refer to penalties which may be
which may be applied to the listed in the pertinent jurisdictional act. These can be fines,
certificate suspensions, certificate cancellations,
holder of a certificate
imprisonment.
of competency
List types of pressure Blowoff vessels, hot water tanks, hydropneumatic tanks, and
vessels discussed in the cushion tanks
CSA B51 section entitled
"pressure vessels"
Explain the two purposes of To provide for the safe design, construction, installation,
the CSA B52 code operation, and repair of refrigerating and air conditioning
equipment and systems, and related equipment. To promote
uniform requirements among the provinces and territories.
Describe the purpose of This code contains rules that have been compiled to assist
ASME Section VI operators of heating boilers in maintaining their plants in as
recommended rules for the safe a condition as possible. These rules apply to the boiler
care and operation of proper and to pipe connections up to and including the value
heating boilers and explain of valves required by the ASME code. Rules are also given
how this purpose is covering auxiliary equipment in so far as safety is concerned
achieved.
These recommended procedures cover the treatment of
What recommended water in steam and hot water boilers. They cover boiler water
procedures are covered in troubles, chemicals used, function of chemicals, treatment
ASME Section VI alternatives, blowdown, feeders, and procedures
recommended rules for the
care and operation of heating
boilers pertaining to the
treatment of water in steam
and hot water heating
boilers?
,Which of the following D
items are covered in the
appendix or the ASME
Boiler and Pressure Vessel
Code, Section IV Heating
Boilers?
a) approval of
newmaterials under code
b) porosity charts for
weldradiography
c) manufacturer's
datareport forms and guides
d) all of the above
Which of the ASME codes C
deal with some conditions
which are not
encountered in Section I
Power Boilers? a) section VI
b) section IV
c) section VII
d) CSA B51
B
The amount of heat required
to raise the temperature of a
unit mass if a substance 1
degree Celsius without
changing the state of the
substance is defined as
a) sensible heat
b) specific heat
c) superheat
d) saturated
, _________ heat causes a A
change in the temperature of
a substance without
changing its state a) sensible
b) specific
c) superheat
d) saturated
The first law of C
thermodynamics states
that heat and work are a)
incompatible
b) unconvertible
c) mutually convertible
d) the same process
C
The second law of
thermodynamics states
that if it is required to
transfer heat from a cold
substance to a hotter
substance, then _______
must be supplied a) pressure
b) external heat
c) external work
d) R134-a
Answers, .
Terms in this set (260)
What is a jurisdiction? Each province and territory is its own jurisdiction
Explain the intent of the To give the director or administrator of the department or
regulation's governing the branch or government a means of evolving, within the
operation of boilers and framework of the intent of the act, to meet changes in
pressure equipment? technology, concept, and the use of those variables listed
within the scope of the act.
Is it more difficult to change The main or primary document is an "act" which must be
an act or a regulation? passed through the jurisdictional legislature. The act then
has "regulations" which are pursuant to the enforcement of
the act. These regulations are usually under the governance
of an official of the government rather than the actual
legislature. As a result, it is much easier to have changes
made to a regulation than it is to have changes made to an
act.
What jurisdictional item or Power engineers acts and regulations
legislation is most important
to a person interning time
make power engineering a
career choice?
CSA B51 and CSA B52
What two Canadian national
codes have been adopted by
all jurisdictions
,List some of the penalties The regulation will also refer to penalties which may be
which may be applied to the listed in the pertinent jurisdictional act. These can be fines,
certificate suspensions, certificate cancellations,
holder of a certificate
imprisonment.
of competency
List types of pressure Blowoff vessels, hot water tanks, hydropneumatic tanks, and
vessels discussed in the cushion tanks
CSA B51 section entitled
"pressure vessels"
Explain the two purposes of To provide for the safe design, construction, installation,
the CSA B52 code operation, and repair of refrigerating and air conditioning
equipment and systems, and related equipment. To promote
uniform requirements among the provinces and territories.
Describe the purpose of This code contains rules that have been compiled to assist
ASME Section VI operators of heating boilers in maintaining their plants in as
recommended rules for the safe a condition as possible. These rules apply to the boiler
care and operation of proper and to pipe connections up to and including the value
heating boilers and explain of valves required by the ASME code. Rules are also given
how this purpose is covering auxiliary equipment in so far as safety is concerned
achieved.
These recommended procedures cover the treatment of
What recommended water in steam and hot water boilers. They cover boiler water
procedures are covered in troubles, chemicals used, function of chemicals, treatment
ASME Section VI alternatives, blowdown, feeders, and procedures
recommended rules for the
care and operation of heating
boilers pertaining to the
treatment of water in steam
and hot water heating
boilers?
,Which of the following D
items are covered in the
appendix or the ASME
Boiler and Pressure Vessel
Code, Section IV Heating
Boilers?
a) approval of
newmaterials under code
b) porosity charts for
weldradiography
c) manufacturer's
datareport forms and guides
d) all of the above
Which of the ASME codes C
deal with some conditions
which are not
encountered in Section I
Power Boilers? a) section VI
b) section IV
c) section VII
d) CSA B51
B
The amount of heat required
to raise the temperature of a
unit mass if a substance 1
degree Celsius without
changing the state of the
substance is defined as
a) sensible heat
b) specific heat
c) superheat
d) saturated
, _________ heat causes a A
change in the temperature of
a substance without
changing its state a) sensible
b) specific
c) superheat
d) saturated
The first law of C
thermodynamics states
that heat and work are a)
incompatible
b) unconvertible
c) mutually convertible
d) the same process
C
The second law of
thermodynamics states
that if it is required to
transfer heat from a cold
substance to a hotter
substance, then _______
must be supplied a) pressure
b) external heat
c) external work
d) R134-a
