Union Pacific conductor final Exam Questions And Answers 2025.
1. What is a length of a track between consecutive block signal or between a
block signal and the end of the block system limit.
A. Block
B. Main track
C crossing: A. Block
2. What is the appearance of a fixed or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons: B. Signal aspect
3. According to rules hierarchy the system special instruction can be updated
by which of the following?
A. Service unit general order
B. General notice
C. System general order: C. System general order
4. What is an absolute signal that is controlled by a controlled operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal: C. Controlled signal
5. Your duties require you to cross through a train or a standing cut of cars.
After proper protection is provided and before crossing over from one side of
the equipment to the other side, you should?
A. Choose equipment carefully, using cars equipped with a crossover platform
and handholds (when available).
B. On equipment where crossover platforms and handholds are not available,
use end of car structural bracing to maintain 3-point contact, il sate to do so.
,C. Both answers are correct.: C. Both answers are correct
6. What is a system of tracks, other than main tracks and sidings, that is used
for making up trains, storng cars, and other purposes?
A. Siding
B. Main track
, C. Yard: C. Yard
7. To enter an area between two adjacent tracks is the glossary definition of ?
A. Breach
B. Crossing Through
C. Red Zone: A. Breach
8. Employees must not get on or off cars and engines (whether standing or
moving) except when required in the performance of duty, and only when it
can be done safely. When getting off standing equipment:
A. Let go with both hands before your feet touch the ground or other support.
B. Retain a grip with both hands on the handhold until both feet are firmly
placed on the ground or other support.
C. Place one foot on the ground, then let go with one hand and place the other
foot on the ground before letting go.: B.Retain a grip with both hands on the
handhold until both feet are firmly placed on the ground or other support.
9. Employees must be careful to prevent injuring themselves or others. They
must be when performing their dutics and plan their work to avoid
injury.
A. Alert and Attentive
B. Responsive and Activel
C. Organized and Permissive: A. Alert and attentive
10. When an engine, train or cars are left unattended, what must you do to
secure them?.
A. Apply air brakes to hold the train in place.
B. Make a full-service reduction and place the train in emergency.
C. Apply a suflicient number of hand brakes to prevent movement.: C. Apply a
suflicient number of hand brakes to prevent movement.
11. How may rules be issued, canceled or modified?
A. General Notices
B. Track Bulletins, Gencral Orders, or Special Instructions
1. What is a length of a track between consecutive block signal or between a
block signal and the end of the block system limit.
A. Block
B. Main track
C crossing: A. Block
2. What is the appearance of a fixed or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons: B. Signal aspect
3. According to rules hierarchy the system special instruction can be updated
by which of the following?
A. Service unit general order
B. General notice
C. System general order: C. System general order
4. What is an absolute signal that is controlled by a controlled operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal: C. Controlled signal
5. Your duties require you to cross through a train or a standing cut of cars.
After proper protection is provided and before crossing over from one side of
the equipment to the other side, you should?
A. Choose equipment carefully, using cars equipped with a crossover platform
and handholds (when available).
B. On equipment where crossover platforms and handholds are not available,
use end of car structural bracing to maintain 3-point contact, il sate to do so.
,C. Both answers are correct.: C. Both answers are correct
6. What is a system of tracks, other than main tracks and sidings, that is used
for making up trains, storng cars, and other purposes?
A. Siding
B. Main track
, C. Yard: C. Yard
7. To enter an area between two adjacent tracks is the glossary definition of ?
A. Breach
B. Crossing Through
C. Red Zone: A. Breach
8. Employees must not get on or off cars and engines (whether standing or
moving) except when required in the performance of duty, and only when it
can be done safely. When getting off standing equipment:
A. Let go with both hands before your feet touch the ground or other support.
B. Retain a grip with both hands on the handhold until both feet are firmly
placed on the ground or other support.
C. Place one foot on the ground, then let go with one hand and place the other
foot on the ground before letting go.: B.Retain a grip with both hands on the
handhold until both feet are firmly placed on the ground or other support.
9. Employees must be careful to prevent injuring themselves or others. They
must be when performing their dutics and plan their work to avoid
injury.
A. Alert and Attentive
B. Responsive and Activel
C. Organized and Permissive: A. Alert and attentive
10. When an engine, train or cars are left unattended, what must you do to
secure them?.
A. Apply air brakes to hold the train in place.
B. Make a full-service reduction and place the train in emergency.
C. Apply a suflicient number of hand brakes to prevent movement.: C. Apply a
suflicient number of hand brakes to prevent movement.
11. How may rules be issued, canceled or modified?
A. General Notices
B. Track Bulletins, Gencral Orders, or Special Instructions
