100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached 4.6 TrustPilot
logo-home
Exam (elaborations)

Chapter 1: Principles of Transmission Exam 2025 Questions and Answers 100% Pass

Rating
-
Sold
-
Pages
21
Grade
A+
Uploaded on
25-04-2025
Written in
2024/2025

Chapter 1: Principles of Transmission Exam 2025 Questions and Answers 100% Pass 100 Gb/s - Multimode optical fiber is best suited for premises applications where links are less than ≈100m (328ft) for data rates of _____ or less. - 155 mb/s - 1 gb/s - 10 gb/s - 100 gb/s Return Loss - For balanced twisted-pair cabling, _______ is the ratio between the transmitted power and the reflected power expressed in dBs. Solid - When comparing stranded conductors to solid conductors, and advantage of _____ conductors is less resistance. True - (ToF) Digital data can be transmitted noise free over essentially unlimited distances if the digital data received and regenerated at intervals before it is degraded by added noise. True - (ToF) Free space loss is the signal attenuation that would result if all reflection, refraction, scattering, diffraction, and absorption influences were removed. 2COPYRIGHT © 2025 BY EMILLY CHARLOTTE, ALL RIGHTS RESERVED 400 Gb/s - GigE is being deployed on many optical fiber networks. Typical IEEE recognized GigE network speeds in the MAN and WAN environment can be as high as: True - (ToF) Increasing the length of an optical fiber link can result in an increase in total signal attenuation. 780 nm - The center wavelength of short wavelength lasers is: False - (ToF) Stranded conductors have better transmission performance at high frequencies than solid conductors. At least twice - Analog signals can be converted into a digital signal by a multi- step process. The Sampling rate used must be ______ the highest frequency component of the analog signal. DS2 - Which of the following North American multiplexing levels has a data rate of 6.312 Mb/s? 1.0 dB/km - The maximum cable attenuation coefficient for single mode inside plant optical fiber cable at a wavelength of 1383 nm is: SDH (Synchronous Digital Hierarchy) - Standards have been established for optical fiber carrier transmission. The international standard is: Short wavelength laser - Which of the following multimode optical fiber transmitters has a spectral width of 4 nm? Increasing - The transmission characteristics of conductors pairs vary with frequency. ______ the frequency increases the speed of transmission through cable pairs. Carrier - Which one of the following is not a

Show more Read less
Institution
RCDD
Course
RCDD










Whoops! We can’t load your doc right now. Try again or contact support.

Written for

Institution
RCDD
Course
RCDD

Document information

Uploaded on
April 25, 2025
Number of pages
21
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers

Subjects

Content preview

Chapter 1: Principles of Transmission
Exam 2025 Questions and Answers
100% Pass


100 Gb/s - ✔✔Multimode optical fiber is best suited for premises applications
where links are less than ≈100m (328ft) for data rates of _____ or less.




- 155 mb/s

- 1 gb/s

- 10 gb/s

- 100 gb/s

Return Loss - ✔✔For balanced twisted-pair cabling, _______ is the ratio between the
transmitted power and the reflected power expressed in dBs.

Solid - ✔✔When comparing stranded conductors to solid conductors, and advantage
of _____ conductors is less resistance.

True - ✔✔(ToF) Digital data can be transmitted noise free over essentially unlimited
distances if the digital data received and regenerated at intervals before it is
degraded by added noise.

True - ✔✔(ToF) Free space loss is the signal attenuation that would result if all
reflection, refraction, scattering, diffraction, and absorption influences were
removed.



COPYRIGHT © 2025 BY EMILLY CHARLOTTE, ALL RIGHTS RESERVED 1

,400 Gb/s - ✔✔GigE is being deployed on many optical fiber networks. Typical IEEE
recognized GigE network speeds in the MAN and WAN environment can be as high
as:

True - ✔✔(ToF) Increasing the length of an optical fiber link can result in an increase
in total signal attenuation.

780 nm - ✔✔The center wavelength of short wavelength lasers is:

False - ✔✔(ToF) Stranded conductors have better transmission performance at high
frequencies than solid conductors.

At least twice - ✔✔Analog signals can be converted into a digital signal by a multi-
step process. The Sampling rate used must be ______ the highest frequency
component of the analog signal.

DS2 - ✔✔Which of the following North American multiplexing levels has a data rate
of 6.312 Mb/s?

1.0 dB/km - ✔✔The maximum cable attenuation coefficient for single mode inside
plant optical fiber cable at a wavelength of 1383 nm is:

SDH (Synchronous Digital Hierarchy) - ✔✔Standards have been established for
optical fiber carrier transmission. The international standard is:

Short wavelength laser - ✔✔Which of the following multimode optical fiber
transmitters has a spectral width of 4 nm?

Increasing - ✔✔The transmission characteristics of conductors pairs vary with
frequency. ______ the frequency increases the speed of transmission through cable
pairs.

Carrier - ✔✔Which one of the following is not a type of modulation used in wireless
transmission?

More - ✔✔Stranded conductor cable has _____ attenuation than solid conductor
cable.



COPYRIGHT © 2025 BY EMILLY CHARLOTTE, ALL RIGHTS RESERVED 2

, 780 nm - ✔✔Optical fiber transmitters emit light at or near one of four nominal
wavelengths. Which one of the following is not one of those nominal wavelengths?

Shorter - ✔✔Loading coils limit the frequency at which information can be
transmitted. The loading coil spacing determines the upper cutoff frequency. The
______ the spacing between loading points, the higher the cutoff frequency.

≈90m (295ft); including - ✔✔A balanced twisted-pair permanent link consists of up
to _____ of horizontal cabling, _______ a connector at each end.

Dimensions and separation of conductors - ✔✔Series inductance is related to the:




- Dimensions and separation of conductors

- Dielectric loss of the insulation and jacket materials

- Dimensions and separation of conductors and to the dielectric constant of the
insulation and jacket materials

0.75 - ✔✔The maximum recommended connection loss for optical fiber connectors is
______ dB.




- 0.05

- 0.10

- 0.30

- 0.75

Resistive - ✔✔The earlier function model of a transmission line was based on _____
loss.




- resistive




COPYRIGHT © 2025 BY EMILLY CHARLOTTE, ALL RIGHTS RESERVED 3

Get to know the seller

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
EmillyCharlotte Howard Community College
View profile
Follow You need to be logged in order to follow users or courses
Sold
98
Member since
1 year
Number of followers
5
Documents
11964
Last sold
2 weeks ago
ALL-MAJOR.

On this page, you find all documents, package deals, and flashcards offered by seller Emilly Charlotte.

3.5

21 reviews

5
7
4
6
3
2
2
3
1
3

Recently viewed by you

Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Frequently asked questions