NCCER study guide Module 1 Basic
Safety Exam Questions And Answers
Verified 100% Correct!!!
Companies with strong safety cultures usually have lower _ . CORRECT ANSWERS
turnover
Safety is a learned behavior and attitude. T/F CORRECT ANSWERS TRUE
Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _.
CORRECT ANSWERS unsafe conditions
The activity that consists of breaking a job into its component task and then analyzing
each step for potential hazards is called _ _ _ . CORRECT ANSWERS job safety
analysis
The measure of probability, consequences, and exposure related to an event is referred
to as _ . CORRECT ANSWERS Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers
from falls is to _ _ _ _ _ _ _ . CORRECT ANSWERS cover the opening and label the
cover
The D-ring or support point on a safety harness should be placed _ _ _ _ _ _ .
CORRECT ANSWERS in the middle of the back
A personal fall arrest system should be inspected monthly by a _ _ . CORRECT
ANSWERS competent person
Lanyards that have no shock-absorbing features are used for _ . CORRECT ANSWERS
positioning
When placing a ladder against a platform or roof, the top of the ladder should extend
above the point where the ladder touches the platform or roof by at least _ _ _ .
CORRECT ANSWERS 3 feet (91 cm)
When performing overhead work on scaffolding, _ , _ _ , or _ must be applied as
protective measures to prevent objects from falling and striking a person below.
CORRECT ANSWERS Toeboards, debris nets, canopies
When stacking materials such as bricks or blocks, do not stack materials beyond a _ _ _
_ _. CORRECT ANSWERS 4:1 height-to-base ratio
Safety Exam Questions And Answers
Verified 100% Correct!!!
Companies with strong safety cultures usually have lower _ . CORRECT ANSWERS
turnover
Safety is a learned behavior and attitude. T/F CORRECT ANSWERS TRUE
Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _.
CORRECT ANSWERS unsafe conditions
The activity that consists of breaking a job into its component task and then analyzing
each step for potential hazards is called _ _ _ . CORRECT ANSWERS job safety
analysis
The measure of probability, consequences, and exposure related to an event is referred
to as _ . CORRECT ANSWERS Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers
from falls is to _ _ _ _ _ _ _ . CORRECT ANSWERS cover the opening and label the
cover
The D-ring or support point on a safety harness should be placed _ _ _ _ _ _ .
CORRECT ANSWERS in the middle of the back
A personal fall arrest system should be inspected monthly by a _ _ . CORRECT
ANSWERS competent person
Lanyards that have no shock-absorbing features are used for _ . CORRECT ANSWERS
positioning
When placing a ladder against a platform or roof, the top of the ladder should extend
above the point where the ladder touches the platform or roof by at least _ _ _ .
CORRECT ANSWERS 3 feet (91 cm)
When performing overhead work on scaffolding, _ , _ _ , or _ must be applied as
protective measures to prevent objects from falling and striking a person below.
CORRECT ANSWERS Toeboards, debris nets, canopies
When stacking materials such as bricks or blocks, do not stack materials beyond a _ _ _
_ _. CORRECT ANSWERS 4:1 height-to-base ratio
