Module 00101-15 Exam Basic Safety
Questions With Already Solved Correctly
Answers | Verified Success
Companies with strong safety cultures usually have lower ____________.
a. turnover
b. productivity
c. wages
d. morale CORRECT ANSWERS a
Which of these is a true statement regarding safety?
a. safety is a learned behavior and attitude.
b. safety consciousness comes naturally to most individuals.
c. safety primarily depends on workers in the field.
d. safety does not normally require training. CORRECT ANSWERS a
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of
_______________.
a. acceptable risks
b. unsafe conditions
c. unavoidable hazards
d. unsafe acts CORRECT ANSWERS b
The activity that consists of breaking a job into its component tasks and then analyzing
each step for potential hazards is called a ____________.
a. job safety analysis
b. hazardous incident simulation
c. safety breakdown structure
d. safety pre-assessment CORRECT ANSWERS a
A measure of the probability, consequences, and exposure related to an event is
referred to as _______________.
a. safety
b. evaluation
c. risk
d. hazard CORRECT ANSWERS c
, If there is a hole in the floor of a structure, the preferred method of protecting workers
from falls is to _____.
a. cover the opening and label the cover.
b. place reflective tape around the opening
c. post a guard at the opening.
d. place a warning sign near the opening CORRECT ANSWERS a
The D-ring or support point on a safety harness should be placed _______.
a. in the middle of your back
b. between your shoulder blades
c. around your waist
d. over your rib cage CORRECT ANSWERS b
A personal fall arrest system should be inspected monthly by a(n)________.
a. co-wworker
b. state safety inspector
c. project manager
d. competent person CORRECT ANSWERS d
Lanyards that have no shock-absorbing features are used for _____.
a. workers under 150 pounds
b. positioning
c. working on scaffolds
d. climbing ladders CORRECT ANSWERS b
When placing a ladder against a platform or roof, the top of the ladder should extend
above the point where the ladder touches the platform or roof by at least _______.
a. 2 feet
b. 3 feet
c. 4 feet
d. 5 feet CORRECT ANSWERS b
When performing overhead work on scaffolding, what protective measures must be
taken to prevent falling objects from falling and striking a person below?
a. Fall arrest system are used
b. Alarm systems should be enabled
c. Toeboards, debris nets, or canopies must be applied
d. Warning tags are posted on the scaffold CORRECT ANSWERS c
Questions With Already Solved Correctly
Answers | Verified Success
Companies with strong safety cultures usually have lower ____________.
a. turnover
b. productivity
c. wages
d. morale CORRECT ANSWERS a
Which of these is a true statement regarding safety?
a. safety is a learned behavior and attitude.
b. safety consciousness comes naturally to most individuals.
c. safety primarily depends on workers in the field.
d. safety does not normally require training. CORRECT ANSWERS a
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of
_______________.
a. acceptable risks
b. unsafe conditions
c. unavoidable hazards
d. unsafe acts CORRECT ANSWERS b
The activity that consists of breaking a job into its component tasks and then analyzing
each step for potential hazards is called a ____________.
a. job safety analysis
b. hazardous incident simulation
c. safety breakdown structure
d. safety pre-assessment CORRECT ANSWERS a
A measure of the probability, consequences, and exposure related to an event is
referred to as _______________.
a. safety
b. evaluation
c. risk
d. hazard CORRECT ANSWERS c
, If there is a hole in the floor of a structure, the preferred method of protecting workers
from falls is to _____.
a. cover the opening and label the cover.
b. place reflective tape around the opening
c. post a guard at the opening.
d. place a warning sign near the opening CORRECT ANSWERS a
The D-ring or support point on a safety harness should be placed _______.
a. in the middle of your back
b. between your shoulder blades
c. around your waist
d. over your rib cage CORRECT ANSWERS b
A personal fall arrest system should be inspected monthly by a(n)________.
a. co-wworker
b. state safety inspector
c. project manager
d. competent person CORRECT ANSWERS d
Lanyards that have no shock-absorbing features are used for _____.
a. workers under 150 pounds
b. positioning
c. working on scaffolds
d. climbing ladders CORRECT ANSWERS b
When placing a ladder against a platform or roof, the top of the ladder should extend
above the point where the ladder touches the platform or roof by at least _______.
a. 2 feet
b. 3 feet
c. 4 feet
d. 5 feet CORRECT ANSWERS b
When performing overhead work on scaffolding, what protective measures must be
taken to prevent falling objects from falling and striking a person below?
a. Fall arrest system are used
b. Alarm systems should be enabled
c. Toeboards, debris nets, or canopies must be applied
d. Warning tags are posted on the scaffold CORRECT ANSWERS c
