CWEA E/I 2 Study Guide Quest
1. In a simple ratio system, the independent variable is:
a. Both measured and managed.
B. Controlled however no longer measured.
C. Measured but now not managed.
D. Neither measured nor managed. - ANS-c. Measured but no longer controlled
1. Scheduling need to precede:
a. Planning.
B. Cloth procurement.
C. Workload balancing.
D. Process execution - ANS-d. Job execution
1. To pick the right protection for a motor, you want to understand all the following except the:
a. Ambient temperature.
B. Complete-load contemporary score.
C. Service aspect.
D. Time rating. - ANS-a. Ambient temperature
10. Local I/O enlargement entails the addition of:
a. A 2nd processor.
B. A shift check in.
C. Facts-handling skills.
D. I/O points in the rack. - ANS-d. I/O factors inside the rack.
Eleven. A major reason of problems in multi-layer printed circuit boards is:
a. Age.
B. Corrosion.
C. Interlayer separation.
D. Overheating. - ANS-c. Interlayer separation
12. A software program hassle that causes wrong effects is referred to as a:
a. Malicious program.
B. Crash.
C. Glitch.
D. Spike. - ANS-a. Computer virus.
Thirteen. The CPU of a microcomputer is a(n):
a. ALU.
B. Microcontroller.
,C. Microprocessor.
D. Published circuit assembly. - ANS-c. Microprocessor
14. Where is a computer's start-up program typically saved?
A. In RAM
b. In ROM
c. On disk
d. On magnetic tape - ANS-b. In ROM
15. How many sign situations can virtual I/O devices have?
A. One
b. Two
c. Eight
d. An countless quantity - ANS-b. Two
16. A CDU (Command and Display Unit) pc display screen that senses finger pressure is:
a. A digitizer.
B. An shrewd terminal.
C. A scanner.
D. A touch display. - ANS-d. A touch display screen.
17. Which of the subsequent isn't always a aim of a microprocessor-
based engine manage system?
A. Better engine performance
b. Better gasoline financial system
c. Lower exhaust emissions.
D. Lower noise emissions - ANS-d. Lower noise emissions
18. The RS232C wellknown applies to what form of virtual statistics transmission?
A. Balanced
b. Fiber optic
c. Parallel
d. Serial - ANS-d. Serial
19. 10°C is equal to how many levels Fahrenheit?
A. 23.Three°F
b. 50°F
c. Seventy five.6°F
d. - 47.6°F - ANS-b. 50°F
2. An on-off transfer with overload relays is referred to as a:
a. Magnetic manage.
B. Guide starter.
C. Reversing starter.
, D. Combination starter - ANS-b. Guide starter
2. The root-imply-rectangular method is used to calculate:
a. Quintessential and spinoff action.
B. Proportional band or advantage.
C. Gadget accuracy.
D. Transducer bias - ANS-c. System accuracy.
2. Which of the subsequent must you NOT do after giving your crew instructions?
A. Repeat key points
b. Justify your commands
c. Refuse to trade assignments
d. Seek similarly information on a process - ANS-c. Refuse to alternate assignments
20. What is the volume of a cylinder with a 40-foot diameter and top of 23 feet?
A. 1,444 cu ft
b. 7,222 cu toes
c. 28,888 cu feet
d. 33,221 cu feet - ANS-c. 28,888 cu feet
21. One gallon of water weighs eight.34 pounds and one cubic foot carries 7.48 gallons of
water. A fish tank measures 36 inches long, 24 inches huge and 20 inches excessive. How
many
kilos of water might be within the fish tank?
A. 64.Four lbs
b. Seventy four.Eight lbs
c. 83.Four lbs
d. 624 lbs - ANS-d. 624 lbs
three. Hydraulic actuators:
a. Can produce very big thrust.
B. Offer an oblique reaction to enter.
C. Require almost no renovation.
D. Usually use water as the fluid - ANS-a. Can produce very massive thrust.
3. The best way to get comments is through:
a. A suggestion field.
B. The agency newsletter.
C. Asking questions.
D. All of the above - ANS-c. Asking questions.
Three. To simulate an RTD enter, you use a:
a. Virtual VOM.
B. Potentiometer.
1. In a simple ratio system, the independent variable is:
a. Both measured and managed.
B. Controlled however no longer measured.
C. Measured but now not managed.
D. Neither measured nor managed. - ANS-c. Measured but no longer controlled
1. Scheduling need to precede:
a. Planning.
B. Cloth procurement.
C. Workload balancing.
D. Process execution - ANS-d. Job execution
1. To pick the right protection for a motor, you want to understand all the following except the:
a. Ambient temperature.
B. Complete-load contemporary score.
C. Service aspect.
D. Time rating. - ANS-a. Ambient temperature
10. Local I/O enlargement entails the addition of:
a. A 2nd processor.
B. A shift check in.
C. Facts-handling skills.
D. I/O points in the rack. - ANS-d. I/O factors inside the rack.
Eleven. A major reason of problems in multi-layer printed circuit boards is:
a. Age.
B. Corrosion.
C. Interlayer separation.
D. Overheating. - ANS-c. Interlayer separation
12. A software program hassle that causes wrong effects is referred to as a:
a. Malicious program.
B. Crash.
C. Glitch.
D. Spike. - ANS-a. Computer virus.
Thirteen. The CPU of a microcomputer is a(n):
a. ALU.
B. Microcontroller.
,C. Microprocessor.
D. Published circuit assembly. - ANS-c. Microprocessor
14. Where is a computer's start-up program typically saved?
A. In RAM
b. In ROM
c. On disk
d. On magnetic tape - ANS-b. In ROM
15. How many sign situations can virtual I/O devices have?
A. One
b. Two
c. Eight
d. An countless quantity - ANS-b. Two
16. A CDU (Command and Display Unit) pc display screen that senses finger pressure is:
a. A digitizer.
B. An shrewd terminal.
C. A scanner.
D. A touch display. - ANS-d. A touch display screen.
17. Which of the subsequent isn't always a aim of a microprocessor-
based engine manage system?
A. Better engine performance
b. Better gasoline financial system
c. Lower exhaust emissions.
D. Lower noise emissions - ANS-d. Lower noise emissions
18. The RS232C wellknown applies to what form of virtual statistics transmission?
A. Balanced
b. Fiber optic
c. Parallel
d. Serial - ANS-d. Serial
19. 10°C is equal to how many levels Fahrenheit?
A. 23.Three°F
b. 50°F
c. Seventy five.6°F
d. - 47.6°F - ANS-b. 50°F
2. An on-off transfer with overload relays is referred to as a:
a. Magnetic manage.
B. Guide starter.
C. Reversing starter.
, D. Combination starter - ANS-b. Guide starter
2. The root-imply-rectangular method is used to calculate:
a. Quintessential and spinoff action.
B. Proportional band or advantage.
C. Gadget accuracy.
D. Transducer bias - ANS-c. System accuracy.
2. Which of the subsequent must you NOT do after giving your crew instructions?
A. Repeat key points
b. Justify your commands
c. Refuse to trade assignments
d. Seek similarly information on a process - ANS-c. Refuse to alternate assignments
20. What is the volume of a cylinder with a 40-foot diameter and top of 23 feet?
A. 1,444 cu ft
b. 7,222 cu toes
c. 28,888 cu feet
d. 33,221 cu feet - ANS-c. 28,888 cu feet
21. One gallon of water weighs eight.34 pounds and one cubic foot carries 7.48 gallons of
water. A fish tank measures 36 inches long, 24 inches huge and 20 inches excessive. How
many
kilos of water might be within the fish tank?
A. 64.Four lbs
b. Seventy four.Eight lbs
c. 83.Four lbs
d. 624 lbs - ANS-d. 624 lbs
three. Hydraulic actuators:
a. Can produce very big thrust.
B. Offer an oblique reaction to enter.
C. Require almost no renovation.
D. Usually use water as the fluid - ANS-a. Can produce very massive thrust.
3. The best way to get comments is through:
a. A suggestion field.
B. The agency newsletter.
C. Asking questions.
D. All of the above - ANS-c. Asking questions.
Three. To simulate an RTD enter, you use a:
a. Virtual VOM.
B. Potentiometer.
