Mechanical Technologist Grade 1 Study
Material
- ANS-
A 3/8 bolt wishes what size nut? - ANS-five/8
a 480 volt machine has a resistance of 20 ohms. What is the strength consumed in watts? -
ANS-11520 watts
A circle has a circumference of 393 feet. What is its diameter? - ANS-one hundred twenty five ft
A circuit has one hundred twenty volts implemented throughout a resistance of 6 ohms. What is
the modern? - ANS-20 amps
A digester has a radius of 75 toes. What is the floor region of th sludge in the digester in square
toes? - ANS-17673 square feet
A fence is to be established around a lift station wherein each facet lengths are;
235
366
266
298
if a 20 foot gate is set up on the section with 266 feet, what number of lineal feet of fence is
wanted to be established? - ANS-1145 ft
A pump needs to be repacked when? - ANS-the packing is more than one year vintage
A triangular trough is three toes throughout and four ft deep. What is the area of the go segment
in rectangular feet? - ANS-6 square ft
A moist properly measures 30 toes deep, 25 toes extensive, and 35 feet lengthy. What is its
capacity in gallons? - ANS-196350 gallons
Does a micrometer wrench;
Light
Click
slip
, till it reaches its place on the dial? - ANS-Clicks
How do you pick a proper grinder wheel? - ANS-By the dimensions and energy needed
How many gallons of paint would it take to cowl four partitions? - ANS-Find the square pictures
of all partitions, and divide by the square photos of paint within the bucket
How could you locate the floor place of a clarifier? - ANS-3.14xr2
If a digester is seventy five ft tall and 150 toes in diameter what is the quantity in MG? -
ANS-nine.91 MG
If you're excavating a trench 1500 ft long, 6 feet deep, and 3 toes extensive, hot many cubic
yards of material will you eliminate? - ANS-1000 cubic yards
If you have got been given written instructions which you do not understand, what have to you
do? - ANS-Ask the Author
If you warmness a 6.Five inch steel bar from 75 levels F to 250 levels F what is the new period
of the bar? The coefficient for thermal enlargement of steel is .00000633/levels F. - ANS-6.5072
in
If your boss comes into the ruin room and speak to you what do you do? - ANS-Listen and
frivolously react
In terms of piping, what does the term "Shedule" suggest? - ANS-Thickness of pipe wall
Ohm's Law states - ANS-E = I x R
Other than the pump what's every other a part of the pump transfer system? - ANS-Piping
Radial runout is , and Axial runout is ? - ANS-Eccentricity and Wobble
The excellent location to find out what private defensive tools is essential while running with a
chemical is? - ANS-SDS Safety Data Sheet
The kind of tools called the primary equipment, having instantly enamel which might be parallel
to the bore is known as what? - ANS-a Spur gear
This sort of screwdriver is very beneficial in starting screws in tough to attain locations -
ANS-Split tip
What are the formulas for a rectangle and circle? - ANS-LxW=A three.14xR2
Material
- ANS-
A 3/8 bolt wishes what size nut? - ANS-five/8
a 480 volt machine has a resistance of 20 ohms. What is the strength consumed in watts? -
ANS-11520 watts
A circle has a circumference of 393 feet. What is its diameter? - ANS-one hundred twenty five ft
A circuit has one hundred twenty volts implemented throughout a resistance of 6 ohms. What is
the modern? - ANS-20 amps
A digester has a radius of 75 toes. What is the floor region of th sludge in the digester in square
toes? - ANS-17673 square feet
A fence is to be established around a lift station wherein each facet lengths are;
235
366
266
298
if a 20 foot gate is set up on the section with 266 feet, what number of lineal feet of fence is
wanted to be established? - ANS-1145 ft
A pump needs to be repacked when? - ANS-the packing is more than one year vintage
A triangular trough is three toes throughout and four ft deep. What is the area of the go segment
in rectangular feet? - ANS-6 square ft
A moist properly measures 30 toes deep, 25 toes extensive, and 35 feet lengthy. What is its
capacity in gallons? - ANS-196350 gallons
Does a micrometer wrench;
Light
Click
slip
, till it reaches its place on the dial? - ANS-Clicks
How do you pick a proper grinder wheel? - ANS-By the dimensions and energy needed
How many gallons of paint would it take to cowl four partitions? - ANS-Find the square pictures
of all partitions, and divide by the square photos of paint within the bucket
How could you locate the floor place of a clarifier? - ANS-3.14xr2
If a digester is seventy five ft tall and 150 toes in diameter what is the quantity in MG? -
ANS-nine.91 MG
If you're excavating a trench 1500 ft long, 6 feet deep, and 3 toes extensive, hot many cubic
yards of material will you eliminate? - ANS-1000 cubic yards
If you have got been given written instructions which you do not understand, what have to you
do? - ANS-Ask the Author
If you warmness a 6.Five inch steel bar from 75 levels F to 250 levels F what is the new period
of the bar? The coefficient for thermal enlargement of steel is .00000633/levels F. - ANS-6.5072
in
If your boss comes into the ruin room and speak to you what do you do? - ANS-Listen and
frivolously react
In terms of piping, what does the term "Shedule" suggest? - ANS-Thickness of pipe wall
Ohm's Law states - ANS-E = I x R
Other than the pump what's every other a part of the pump transfer system? - ANS-Piping
Radial runout is , and Axial runout is ? - ANS-Eccentricity and Wobble
The excellent location to find out what private defensive tools is essential while running with a
chemical is? - ANS-SDS Safety Data Sheet
The kind of tools called the primary equipment, having instantly enamel which might be parallel
to the bore is known as what? - ANS-a Spur gear
This sort of screwdriver is very beneficial in starting screws in tough to attain locations -
ANS-Split tip
What are the formulas for a rectangle and circle? - ANS-LxW=A three.14xR2
