CIS 106 Unit 11 Final Exam Study Guide
Unit 1
Your local area experiences brownouts or blackouts during frequent electrical storms.
Which of the following components could you add to your network rack to help protect your servers
from brownouts or blackouts?
UPS
Which of the following are considered input devices? (Select three.)
● Keyboard
● Microphone
● Scanner
Based on the back view of the network rack below, match each component on the left to the
label displayed on the network rack image.
● A
○ Ethernet router
● B
○ Ethernet switch
● C
○ Ethernet patch panel
● D
○ Fiber patch panel
● E
○ Server
,CIS 106 Unit 11 Final Exam Study Guide
The router above provides several ports for connecting two or more network segments or subnets.
The port circled in red is a small form-factor pluggable (SFP) connector. Which type of network can
connect to this port?
WAN
You are in the process of setting up an Ethernet network for a new building at your company's
headquarters. You need to connect the wires from the different Ethernet office wall plates to your
network rack.
Which of the following components on the network rack should you use to connect the wires from
the office wall plates?
Ethernet patch panel
Which computer function takes data through a series of procedures as defined by a set of
instructions?
Processing
Drag each computer function on the left with its associated hardware component on the right.
(Each option may be used more than once.)
Keyboard Instructions
Hard disk
Long-term storage
Printer
Output
Keyboard
Input
CPU
Processing
Speakers
Output
,CIS 106 Unit 11 Final Exam Study Guide
RAM
Processing
DVD-RW
Long-term storage
Microphone
Input
You need to replace a broken monitor on a desktop system. You decide to replace it with a spare
monitor that wasn't being used. Even though the monitor is made by a different manufacturer than
the desktop computer, it still works with the computer.
Which computer design concept makes this possible?
Standardization
Which of the following are considered computer hardware? (Select two.)
Printer
Motherboard
You are assembling components in a network rack and need a device that connects three network
segments.
Which of the following devices will meet your networking needs?
Ethernet router
Unit 2
An employee calls you to demand more RAM for her computer to complete her work tasks.
However, you know that her department doesn't have a budget for new equipment. Your supervisor
is the only one that has authority to allocate department funds.
Which of the following is the BEST way to respond?
, CIS 106 Unit 11 Final Exam Study Guide
Tell the employee that her department doesn't currently have a budget for equipment
upgrades, but that you will let your supervisor know about the request so it can be properly
determined if new RAM can be acquired.
Your U.S.-based company has recently purchased an old office building where employees are being
assigned to work. As you are setting up the employees' desktop computers, you come to one
location where the nearest wall outlet has only two prongs. All of the metal-enclosed desktop
computers have three-prong cords.
Which of the following is the BEST way to proceed with that particular desktop computer?Use the
existing cord, but remove the grounding prong, as it is not required.
Find a different outlet that uses three prongs.
To prevent ESD when replacing internal computer components, you attach an anti-static wrist strap
to your wrist. Where should the other end be fastened? (Select two.)
● Metal area on the computer case
● Anti-static mat
Timothy works in the graphic arts departments and has received approval to upgrade his video card.
The card has arrived, and you are ready to begin the upgrade by replacing the old video card with
the new one in his workstation.
To ensure your personal safety, which of the following should you do FIRST?
Disconnect power
Which part of the change management process specifies how you will return affected systems to
their original state if your implementation fails?
Backout plan
Which of the following is typically a question asked when defining the scope of change on a change
order form?
Unit 1
Your local area experiences brownouts or blackouts during frequent electrical storms.
Which of the following components could you add to your network rack to help protect your servers
from brownouts or blackouts?
UPS
Which of the following are considered input devices? (Select three.)
● Keyboard
● Microphone
● Scanner
Based on the back view of the network rack below, match each component on the left to the
label displayed on the network rack image.
● A
○ Ethernet router
● B
○ Ethernet switch
● C
○ Ethernet patch panel
● D
○ Fiber patch panel
● E
○ Server
,CIS 106 Unit 11 Final Exam Study Guide
The router above provides several ports for connecting two or more network segments or subnets.
The port circled in red is a small form-factor pluggable (SFP) connector. Which type of network can
connect to this port?
WAN
You are in the process of setting up an Ethernet network for a new building at your company's
headquarters. You need to connect the wires from the different Ethernet office wall plates to your
network rack.
Which of the following components on the network rack should you use to connect the wires from
the office wall plates?
Ethernet patch panel
Which computer function takes data through a series of procedures as defined by a set of
instructions?
Processing
Drag each computer function on the left with its associated hardware component on the right.
(Each option may be used more than once.)
Keyboard Instructions
Hard disk
Long-term storage
Printer
Output
Keyboard
Input
CPU
Processing
Speakers
Output
,CIS 106 Unit 11 Final Exam Study Guide
RAM
Processing
DVD-RW
Long-term storage
Microphone
Input
You need to replace a broken monitor on a desktop system. You decide to replace it with a spare
monitor that wasn't being used. Even though the monitor is made by a different manufacturer than
the desktop computer, it still works with the computer.
Which computer design concept makes this possible?
Standardization
Which of the following are considered computer hardware? (Select two.)
Printer
Motherboard
You are assembling components in a network rack and need a device that connects three network
segments.
Which of the following devices will meet your networking needs?
Ethernet router
Unit 2
An employee calls you to demand more RAM for her computer to complete her work tasks.
However, you know that her department doesn't have a budget for new equipment. Your supervisor
is the only one that has authority to allocate department funds.
Which of the following is the BEST way to respond?
, CIS 106 Unit 11 Final Exam Study Guide
Tell the employee that her department doesn't currently have a budget for equipment
upgrades, but that you will let your supervisor know about the request so it can be properly
determined if new RAM can be acquired.
Your U.S.-based company has recently purchased an old office building where employees are being
assigned to work. As you are setting up the employees' desktop computers, you come to one
location where the nearest wall outlet has only two prongs. All of the metal-enclosed desktop
computers have three-prong cords.
Which of the following is the BEST way to proceed with that particular desktop computer?Use the
existing cord, but remove the grounding prong, as it is not required.
Find a different outlet that uses three prongs.
To prevent ESD when replacing internal computer components, you attach an anti-static wrist strap
to your wrist. Where should the other end be fastened? (Select two.)
● Metal area on the computer case
● Anti-static mat
Timothy works in the graphic arts departments and has received approval to upgrade his video card.
The card has arrived, and you are ready to begin the upgrade by replacing the old video card with
the new one in his workstation.
To ensure your personal safety, which of the following should you do FIRST?
Disconnect power
Which part of the change management process specifies how you will return affected systems to
their original state if your implementation fails?
Backout plan
Which of the following is typically a question asked when defining the scope of change on a change
order form?
