(GRADED A+)
The New Fire Code was adopted in ________ and vastly changed the requirements for
supervision of all fire alarm system. - ANSWER-30
10
JULY 2008
6
An ________ alarm is the result of IMPROPER Installation, or maintenance. -
ANSWER-A. Unwarranted
B. Supervisory
C. Multi-sensor
D. Dust Smoke
An ________ alarm is one which functioned as designed, but which department
response is unnecessary. - ANSWER-A. Unnecessary
B. Supervisor
C. Multi-sensory
D. Unwarranted
A_________ is the open space that carries air between the ceiling and floor above. -
ANSWER-A. Plenum
B. Dust Smoke
C. Supervisory
D. Fire Alarm
Duties that can be performed by an S-95 COF holder include ________ only. -
ANSWER-A. Once every six months.
B. Visual inspections only
C. Supervisory, trouble
D. Fire alarm control panel
The primary purpose of a ________ is to warn occupants and to transmit signals
indication fire to the FDNY. - ANSWER-A. Fire Alarm System
B. Once every six months
C. Fire alarm
D. Fire alarm control panel
The primary purpose of a _______ is to proves signals received from initiating devices
and to activate appropriate signals. - ANSWER-A. Fire alarms control panel
B. Smoke purge, communications
C. Once every six months
, D. Fixed-temperature heat detectors
_____ shall not be a substitute for connection to a secondary power source - ANSWER-
A. unwarranted
B. Multi-criteria
C. Rate of Rise
D. Batteries
The NFPA defines accessibility as - ANSWER-A."ADMITTING CLOSE APPROACH:
NOT GUARDED BY LOCKED DOORS, ELEVATION, AND OTHER EFFECTIVE
MEANS."
B. Ionization chamber
C. Fire alarm control panel
D. Alarm log book
When smoke detectors report the need for maintenance to the FACP, it must be
cleaned within - ANSWER-A. 30
B. 277/480
C. 10
D. 1 week
Ionization detectors use an _____and a source of ionizing - ANSWER-A. Carbon
Monoxide
B. Ionization Chamber
C. Fixed-temperature
D. Installation
Ionization smoke detector monitor _____or electrically charged particles in the air -
ANSWER-A. ions
B. plenum
C. Ionization chamber
D. Four
A_______ signal indicates that a system or device being monitored is in an abnormal
state. - ANSWER-A. Rate of rise
B. Supervisory
C. Unnecessary
D. Fire Alarm
A ______ signal indicates that the alarm system, transmitter, or communications path is
wholly or partially out of service. - ANSWER-A. Supervisory
B. Trouble
C. Fire alarm
D. Plenum