NCCER ELECTRICAL LEVEL 1 MODULE 10 and 11 CONSTRUCTION LATEST UPDATE THIS YEAR ALL WITH 180 QUESTIONS AND CORRECT DETAILED ANSWERS

Page 1 of 20




NCCER ELECTRICAL LEVEL 1 MODULE 10 and 11
CONSTRUCTION LATEST UPDATE THIS YEAR ALL
WITH 180 QUESTIONS AND CORRECT DETAILED
ANSWERS

Question: A cutaway view of a building or object is known as a(n)______. - CORRECT
ANSWER✔✔Sectional drawing




Question: What is the total connected load of Circuit A-1 if each of the Type C lighting fixtures
in the figure above has a total lamp and ballast load of 150VA? - CORRECT ANSWER✔✔1,200VA




Question: In which division of the MasterFormat is electronic safety covered? - CORRECT
ANSWER✔✔Division 28




Question: A section line on a drawing shows - CORRECT ANSWER✔✔The location of the section
on the plan




Question: On electrical drawings, a solid line with a solid circle at the end indicates
wiring______. - CORRECT ANSWER✔✔Turn down

, Page 2 of 20


Question: An electrical drafting line with a double arrowhead represents - CORRECT
ANSWER✔✔A branch circuit homerun




Question: Which of the following are used in electrical drafting lines to show the number of
circuits? - CORRECT ANSWER✔✔Arrowheads




Question: In dimension drawings, the dimensions written on the drawing are - CORRECT
ANSWER✔✔The actual dimensions




Question: Which of the following is used in an electrical diagram to show wiring concealed in a
floor? - CORRECT ANSWER✔✔A dashed line




Question: The architects scale is designed so that one inch equals one foot - CORRECT
ANSWER✔✔False




Question: A circle with two parallel lines drawn through it is the symbol normally used for
______. - CORRECT ANSWER✔✔Duplex receptacles




Question: The NEC specifies one set of electrical drawing symbols that are used in all cases -
CORRECT ANSWER✔✔False

, Page 3 of 20


Question: Which of the following letters in the figure above shows a dimension of 1'-6"? -
CORRECT ANSWER✔✔B




Question: Dotted lines used to represent a branch circuit on a drawing mean that the wiring is
to be - CORRECT ANSWER✔✔Exposed




Question: Which of the following letters in the figure above shows a dimension of 0'-3"? -
CORRECT ANSWER✔✔C




Question: A branch circuit line or drawing that does not have slashes is assumed to have two
conductors - CORRECT ANSWER✔✔True




Question: Which of the following letters in the figure above shows a dimension of 4'-9"? -
CORRECT ANSWER✔✔A




Question: To meet general recommendations, a residential branch circuit rated for 2,400VA
should have a connected lid of no more than - CORRECT ANSWER✔✔1,920VA




Question: Which of the following letters in the figure above shows a dimension of 1'-9"? -
CORRECT ANSWER✔✔D