Conductor Final Exam Questions With 100% Verified
Answers 2025
1. Is it permissible to cross over a
NO
coupled , moving freight cards?
(GSR- G-6)
Three
2. When Mounting or dismounting: how
many points of contact should be
maintained? (GSR G-2)
3. When Mounting or dismounting: Which was Facing the equipment
should you be facing? (GSR T-8)
4. When Mounting or dismounting: Which Sill Step
lad- der or step should be used? GSRT-
8)
5. When Mounting or dismounting: Which Foot Trailing Foot
should be used first if equipment is
moving? (GSR T-8)
6. Describe the proper steps for -Discuss the sequence of the basic jo
conducting a job briefing? steps
-Point out potential hazards related
to the job
-inspect equipment and tools before
us- ing, even if they are thought to be
in working condition
-determine and acquire what protective
equipment is required for the job.
-Make sure that the instructions are
un- derstood and it is clear how the
job will be preformed
7
.
1/
21
, Conductor Final Exam Questions With 100% Verified
Answers 2025
-Follow up with fellow employees to en- sure compliance with
safe work practices
2/
43
, Conductor Final Exam Questions With 100% Verified
Answers 2025
Employees are required to obtain The criteria for
working PPE and Keep it in working properly designe
condition (GSR T-3) safety shoe?
Describe when gloves must be worn?
8. Employees are required to obtain
working PPE and Keep it in working
condition (GSR T-3)
When must hearing protection be
worn?
9. Employees are required to obtain
working PPE and Keep it in working
condition (GSR T-3)
When safety glasses with
approved side shields must be
worn?
10. Employees are required to obtain
working PPE and Keep it in working
condition (GSR T-3)
7
.
1/
21
, Conductor Final Exam Questions With 100% Verified
Answers 2025
Gloves must be worn by employees rid- ing on freight
cars or on steps of en- gines, operating hand brakes,
switch- es or derails, coupling and uncoupling airhoses,
turning angle cocks, handling burning fusees, and
removing or in- stalling end of train marking devices.
-Where continuous noise requires rais- ing the voice to be
heard from a distance of 3 feet,
-where required by posted noticed or special
instructions
-While sanding, fueling or inspecting lo- comotives
on a locomotive underload
-Wear approved ANSI Z87+ high velocity impact poly
carbonate safety eye wear with side shields on duty, they
need not be worn when in an oflce, locker room,
designated lunch area, when in highway motor vehicle or
when out of the vehicle ott property and not otherwise
required to wear eye protection or in passenger carrying
rail equipment.
-Lace up style
-footwear that attords support and pro- tection with upper that
extends over the ankle (min of 5 inches height as mea- sured
from the inside of the boot- Note:
4/
43
Answers 2025
1. Is it permissible to cross over a
NO
coupled , moving freight cards?
(GSR- G-6)
Three
2. When Mounting or dismounting: how
many points of contact should be
maintained? (GSR G-2)
3. When Mounting or dismounting: Which was Facing the equipment
should you be facing? (GSR T-8)
4. When Mounting or dismounting: Which Sill Step
lad- der or step should be used? GSRT-
8)
5. When Mounting or dismounting: Which Foot Trailing Foot
should be used first if equipment is
moving? (GSR T-8)
6. Describe the proper steps for -Discuss the sequence of the basic jo
conducting a job briefing? steps
-Point out potential hazards related
to the job
-inspect equipment and tools before
us- ing, even if they are thought to be
in working condition
-determine and acquire what protective
equipment is required for the job.
-Make sure that the instructions are
un- derstood and it is clear how the
job will be preformed
7
.
1/
21
, Conductor Final Exam Questions With 100% Verified
Answers 2025
-Follow up with fellow employees to en- sure compliance with
safe work practices
2/
43
, Conductor Final Exam Questions With 100% Verified
Answers 2025
Employees are required to obtain The criteria for
working PPE and Keep it in working properly designe
condition (GSR T-3) safety shoe?
Describe when gloves must be worn?
8. Employees are required to obtain
working PPE and Keep it in working
condition (GSR T-3)
When must hearing protection be
worn?
9. Employees are required to obtain
working PPE and Keep it in working
condition (GSR T-3)
When safety glasses with
approved side shields must be
worn?
10. Employees are required to obtain
working PPE and Keep it in working
condition (GSR T-3)
7
.
1/
21
, Conductor Final Exam Questions With 100% Verified
Answers 2025
Gloves must be worn by employees rid- ing on freight
cars or on steps of en- gines, operating hand brakes,
switch- es or derails, coupling and uncoupling airhoses,
turning angle cocks, handling burning fusees, and
removing or in- stalling end of train marking devices.
-Where continuous noise requires rais- ing the voice to be
heard from a distance of 3 feet,
-where required by posted noticed or special
instructions
-While sanding, fueling or inspecting lo- comotives
on a locomotive underload
-Wear approved ANSI Z87+ high velocity impact poly
carbonate safety eye wear with side shields on duty, they
need not be worn when in an oflce, locker room,
designated lunch area, when in highway motor vehicle or
when out of the vehicle ott property and not otherwise
required to wear eye protection or in passenger carrying
rail equipment.
-Lace up style
-footwear that attords support and pro- tection with upper that
extends over the ankle (min of 5 inches height as mea- sured
from the inside of the boot- Note:
4/
43
