NCCCO CORE PRACTICE – SIC QUESTIONS WITH 100% CORRECT ANSWERS

NCCCO CORE PRACTICE – SIC QUESTIONS WITH 100% CORRECT ANSWERS 1. What should be assumed in relation to all electrical lines?: Assume all wires are ENERGIZED and dangerous. 2. How much weight should each plate of the outriggers and its blocks be able to support on a crane?: The total weight of the crane and its load. 3. Who is responsible for determining the parts of the line that are required for a lift?: The crane operator. 4. Which factor is the most important to consider regarding access to the workplace?: Access road/compaction of approach roads. 5. To provide protection in the crane, work area barriers must be placed in what areas?: Within equipment rotation structure. 6. Review of a system or structure to ensure it's operating properly and to identify any needed maintenance. Usually takes place one a year.: Periodic Inspection. 7. What does the term two blocking refer to?: Contact with the ball or load block at the tip of the boom. 8. Systematic check of an asset or system that is performed at regular inter vals, usually daily to monthly.: Frequent inspection. 9. In accordance with OSHA 1926 SS CC, where should standard method hand signal tables be displayed?: In proximity of the lifting operation. 10. According to OSHA 1926 SS CC when the operator has a doubt about the safety of the crane operations he must:: Stop operation and continue only after all security concerns have been resolved. 11. Visual examination of equipment or a property that takes place every three