2024/2025 Exam Questions with 100%
Correct Answers | Latest Update
When will the RETURN TO SEAT sign illuminate when the selector is in
AUTO? - 🧠ANSWER ✔✔Flap handle out of the FLAP Up position.
What is the maximum airspeed for closing a cockpit No. 2 window? -
🧠ANSWER ✔✔Recommended - VREF +80 knots. Maximum of 250 knots.
How is the Optimum Eye Reference position determined? - 🧠ANSWER
✔✔Sight along upper surface of glareshield and over control column to
bottom of HSI.
If a light bulb is inoperative in an alternate action switchlight, may flight
crew personnel relamp the switchlight? - 🧠ANSWER ✔✔No, maintenance
should be contacted for all relamping operations.
When the LT OVRD switch is selected ON, what is the result? - 🧠ANSWER
✔✔Captain's, First Officer's, and center instrument panel floodlights,
forward and aft dome lights illuminate.
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY 1
STATEMENT. ALL RIGHTS RESERVED
,Which EICAS computer is normally controlling the primary and secondary
screens when the computer selector is in AUTO? - 🧠ANSWER ✔✔Left.
How many events may be recorded manually with the EVENT RECORD
switch? - 🧠ANSWER ✔✔Only the last recorded event.
How is a warning presented on the primary EICAS screen? - 🧠ANSWER
✔✔Red text at top of message list.
What condition will cause a siren to sound? - 🧠ANSWER ✔✔Overspeed
warning, cabin pressure 10,000 feet, autopilot disconnect, takeoff config
warning, landing config warning, main cargo door not closed, or latched, or
locked.
How can an advisory be differentiated from a caution? - 🧠ANSWER
✔✔Both are amber (yellow), cautions are left justified, and you will hear the
beeper. Advisory messages are indented one space from cautions on the
primary EICAS screen, there is no audio alert for an advisory level
message.
What indicates more than one page of messages is available, and how
would the pilot page through the messages? - 🧠ANSWER ✔✔The
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY 2
STATEMENT. ALL RIGHTS RESERVED
,descriptor, Page 1 appears on the 11th line; Press Cancel switch to go to
next page.
True or False? Warning EICAS messages are cancelled in the same
manner as the caution messages. - 🧠ANSWER ✔✔False. The problem
must be corrected to remove warning messages.
During which portion of the flight is the fire bell and master warning light
inhibited? - 🧠ANSWER ✔✔Takeoff from nose strut extension until 400' RA
or 20 seconds later.
What indications show that a new status message is available? -
🧠ANSWER ✔✔Cyan STATUS cue appears on the upper left corner of the
secondary screen.
When may status messages be erased? - 🧠ANSWER ✔✔During preflight
or prior to takeoff.
What actions must the flight crew take if a status message reappears after
erasing it? - 🧠ANSWER ✔✔Review MEL for relief.
What actions will cause the stick nudger to operate? - 🧠ANSWER ✔✔Flaps
zero and aircraft pitch increased above stick shaker, or when testing both
stall warning systems using both switches simultaneously.
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY 3
STATEMENT. ALL RIGHTS RESERVED
, What happens if one EICAS CRT fails when the full up engine indications
are displayed? - 🧠ANSWER ✔✔Engine indications display in compacted
mode on the operable CRT.
When the EICAS computer selector is in AUTO, what will happen if the
right EICAS computer fails? - 🧠ANSWER ✔✔Nothing. The default
computer is the left one. A status message appears.
A takeoff configuration warning will indicate how? - 🧠ANSWER ✔✔A siren,
a CONFIG light on the forward instrument panel, both master warning lights
on the glareshield, and a red message on EICAS.
When a takeoff configuration warning is activated, how may the warning be
removed or silenced? - 🧠ANSWER ✔✔Abort the takeoff, then configure the
aircraft correctly.
What conditions will cause a landing configuration warning; can it be
removed or silenced? - 🧠ANSWER ✔✔Flying at 700 feet with the gear not
down, flaps not in the landing range and either thrust lever at idle, initiate a
Go Around, then configure for landing correctly.
If any of the landing gear falsely indicates not down and locked, how may
the landing configuration warning be inhibited? - 🧠ANSWER ✔✔Select
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY 4
STATEMENT. ALL RIGHTS RESERVED