©THESTAR 2025 ALL RIGHTS RESERVED 11:44 AM A+
Introduction to Network Simulations with
Cisco Modeling Labs | CMLLAB. Exam
Questions And Answers |Latest 2025 |
Guaranteed Pass
Controller - Answer✔Component responsible for deploying virtual devices and providing details
about running labs.
Node and Image Definitions interface - Answer✔The interface available from the Tools button
that provides details on all the images currently available on a Cisco Modeling Labs installation.
REST - Answer✔The type of API that Cisco Modeling Labs is built on.
Access console - Answer✔Right-click on the node in the topology view and choose 'Console.'
Included nodes - Answer✔Cisco IOSv, Cisco CAT 8000V, Desktop, Cisco NX-OS 9000.
1|Page
, ©THESTAR 2025 ALL RIGHTS RESERVED 11:44 AM A+
Connect interfaces - Answer✔Right-click on one node and choose Add Link from menu.
Change lab title - Answer✔Click on the lab title at the top of the workbench to access a drop-
down field.
Start lab from workbench - Answer✔1) Use the Start button on the toolbar at the top 2) Click
on LAB in the toolbar and click Start Lab.
Change startup configuration - Answer✔Stop and wipe the node.
Wipe a lab or node - Answer✔Erase the resources associated with the virtual machine for the
node.
Interface types - Answer✔Console and VNC.
PANES button - Answer✔Workbench button used to provide access to open console or VNC
connections to nodes in a simulation.
2|Page
Introduction to Network Simulations with
Cisco Modeling Labs | CMLLAB. Exam
Questions And Answers |Latest 2025 |
Guaranteed Pass
Controller - Answer✔Component responsible for deploying virtual devices and providing details
about running labs.
Node and Image Definitions interface - Answer✔The interface available from the Tools button
that provides details on all the images currently available on a Cisco Modeling Labs installation.
REST - Answer✔The type of API that Cisco Modeling Labs is built on.
Access console - Answer✔Right-click on the node in the topology view and choose 'Console.'
Included nodes - Answer✔Cisco IOSv, Cisco CAT 8000V, Desktop, Cisco NX-OS 9000.
1|Page
, ©THESTAR 2025 ALL RIGHTS RESERVED 11:44 AM A+
Connect interfaces - Answer✔Right-click on one node and choose Add Link from menu.
Change lab title - Answer✔Click on the lab title at the top of the workbench to access a drop-
down field.
Start lab from workbench - Answer✔1) Use the Start button on the toolbar at the top 2) Click
on LAB in the toolbar and click Start Lab.
Change startup configuration - Answer✔Stop and wipe the node.
Wipe a lab or node - Answer✔Erase the resources associated with the virtual machine for the
node.
Interface types - Answer✔Console and VNC.
PANES button - Answer✔Workbench button used to provide access to open console or VNC
connections to nodes in a simulation.
2|Page
