MSSC - Quality Certification Exam
Questions And Answers
Which is NOT one of the steps used in the glass box method? - - -
correct answer ✅rotate object in glass box
The three standard views of an object are ______. - - -
correct answer ✅top, front, right side
What is the order of precedence of lines in a drawing? - - -
correct answer ✅object, hidden, center
What type of feature is parallel to the surface being dimensioned? -
--
correct answer ✅dimension line
A ______ dimension is described in inches per foot. - - -
correct answer ✅shaft taper
To establish on a drawing that 1/4 inch equals 1 inch, the designer
would write ______. - - -
correct answer ✅1/4 = 1
,MSSC - Quality Certification Exam
Questions And Answers
Section lines on a blueprint include _______. - - -
correct answer ✅a surface that has been cut
In a threaded fastener assembly what is designed to protect the
threads? - - -
correct answer ✅shank
The minor diameter of a screw thread is measured at the ______. -
--
correct answer ✅root of screw thread
The minor diameter of a threaded fastener is ______. - - -
correct answer ✅the major diameter minus the thread height
How do you determine the grade of a bolt? - - -
correct answer ✅number of lines on the head +2 indicates the
grade
A screw with National fine thread is represented on a drawing with
what designation? - - -
correct answer ✅NF
, MSSC - Quality Certification Exam
Questions And Answers
Metals treated by ______ processes become soft. - - -
correct answer ✅annealing
A running fit is also called a(n) ______. - - -
correct answer ✅sliding fit
The term ______ refers to a physical portion of a part. - - -
correct answer ✅feature
A(n) _______ is a theoretically perfect line, point or pane that is
located by a similar feature or part. - - -
correct answer ✅datum
GD&T _________________. - - -
correct answer ✅allows certain tolerances on part features to be
increased
A feature control frame is not used to describe ______. - - -
correct answer ✅measurements
Questions And Answers
Which is NOT one of the steps used in the glass box method? - - -
correct answer ✅rotate object in glass box
The three standard views of an object are ______. - - -
correct answer ✅top, front, right side
What is the order of precedence of lines in a drawing? - - -
correct answer ✅object, hidden, center
What type of feature is parallel to the surface being dimensioned? -
--
correct answer ✅dimension line
A ______ dimension is described in inches per foot. - - -
correct answer ✅shaft taper
To establish on a drawing that 1/4 inch equals 1 inch, the designer
would write ______. - - -
correct answer ✅1/4 = 1
,MSSC - Quality Certification Exam
Questions And Answers
Section lines on a blueprint include _______. - - -
correct answer ✅a surface that has been cut
In a threaded fastener assembly what is designed to protect the
threads? - - -
correct answer ✅shank
The minor diameter of a screw thread is measured at the ______. -
--
correct answer ✅root of screw thread
The minor diameter of a threaded fastener is ______. - - -
correct answer ✅the major diameter minus the thread height
How do you determine the grade of a bolt? - - -
correct answer ✅number of lines on the head +2 indicates the
grade
A screw with National fine thread is represented on a drawing with
what designation? - - -
correct answer ✅NF
, MSSC - Quality Certification Exam
Questions And Answers
Metals treated by ______ processes become soft. - - -
correct answer ✅annealing
A running fit is also called a(n) ______. - - -
correct answer ✅sliding fit
The term ______ refers to a physical portion of a part. - - -
correct answer ✅feature
A(n) _______ is a theoretically perfect line, point or pane that is
located by a similar feature or part. - - -
correct answer ✅datum
GD&T _________________. - - -
correct answer ✅allows certain tolerances on part features to be
increased
A feature control frame is not used to describe ______. - - -
correct answer ✅measurements
