BICSI
BICSI Practice Test-RETAKE | 2024-2025
LATEST UPDATED
The 2 main considerations concerning the existing cabling are? - Grandfathered
system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until
completed is called a - rolling cut 11-28
Which practice involves moving the customer to a temporary office space until
their section of the retrofit is completed and then moving them back to their
recabled office space? - Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the
presence of light? - Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out?
- CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - Office
locator kit
A _________ injects light (at a proper wavelength) and measures the results t the
other end. - Light source and power meter
BICSI
, BICSI
A ________ detects the presence of light within a fiber strand - Fiber strand
identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the
near end. - Visual fault locator
A________ will leave the customer momentarily without communications - Hot-
cut 11-28
During a _______, cross-connects are relocated one pair after another until
completed. - Rolling cut
*_________ is a property of an electromagnetic field built around a conductor that
opposes any changes in current flow in a circuit. - Inductance
____________ is a property of conductors that allows storage of electrical charges
when potential differences (voltages) exist between the conductors. - Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is
measured in ohms. - Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______
ohms at 100 MHz - 100
Pair 626 would be in the __________ Super Binder - Red
Series ______ is the preferred choice for longer runs - 11
BICSI
BICSI Practice Test-RETAKE | 2024-2025
LATEST UPDATED
The 2 main considerations concerning the existing cabling are? - Grandfathered
system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until
completed is called a - rolling cut 11-28
Which practice involves moving the customer to a temporary office space until
their section of the retrofit is completed and then moving them back to their
recabled office space? - Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the
presence of light? - Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out?
- CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - Office
locator kit
A _________ injects light (at a proper wavelength) and measures the results t the
other end. - Light source and power meter
BICSI
, BICSI
A ________ detects the presence of light within a fiber strand - Fiber strand
identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the
near end. - Visual fault locator
A________ will leave the customer momentarily without communications - Hot-
cut 11-28
During a _______, cross-connects are relocated one pair after another until
completed. - Rolling cut
*_________ is a property of an electromagnetic field built around a conductor that
opposes any changes in current flow in a circuit. - Inductance
____________ is a property of conductors that allows storage of electrical charges
when potential differences (voltages) exist between the conductors. - Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is
measured in ohms. - Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______
ohms at 100 MHz - 100
Pair 626 would be in the __________ Super Binder - Red
Series ______ is the preferred choice for longer runs - 11
BICSI
