March 25
CompTIA A+ Certmaster test Complete Questions and Correct
Detailed Answers (Verified Answers)
A tablet user connects a Bluetooth keyboard. What would be expected in the
pairing process?
Enter a PIN.
Test connectivity.
Perform a sync.
Perform multifactor authentication.
Ans: Enter a pin
What cable has a data rate of 480 Mbps
Ans: USB 2.0
A technician notices that the printer's output was not expected and needs to check
the printer's control panel to investigate the problem. What does the technician need
to check
Toner
Developer roller
pg. 1
, March 25
Calibration
Maintenance kit
Ans: Calibration
A remote connection for users to access a company's private network requires
access from an external IP. How might a laptop user test this connection if they are
currently connected to the company's internal network?
Enable pairing.
Use a hotspot.
Use the correct PIN.
Update the PRL.
Ans: Use a hotspot
A company asked a network engineer to provide a solution that will allow a hosted
application to be highly available if one or more servers are offline. They have plenty
of resources to provide a cluster of servers that can run the application. Still, the
company is looking for direction on making the application seamlessly available to
customers. What solution would the engineer implement for this request?
pg. 2
, March 25
Spam gateway
Proxy server
Web server
Load balancer
Ans: Load balancer
A user complains the cursor on their laptop jumps around on its own. This is
especially bad while they are typing. What could solve this problem? (Select all that
apply.)
Disable the touchpad.
Replace the backlight.
Replace the battery.
Configure input options.
Ans: Disable the touchpad.
and
Configure input options.
Which universal serial bus (USB) 2 connector is square with a beveled top that a
technician can use for printers
pg. 3
, March 25
Ans: USB Type B
A network engineer must set up an office's new wireless access points (APs). After
installing the access points, the engineer must ensure they set up the radio signals
correctly and that all office areas receive the most efficient signal possible. What tool
will the engineer utilize?
Wi-Fi analyzer
Toner probe
Cable tester
Loopback plug
Ans: Wi-Fi analyzer
A technician needs a cable for 10G Ethernet and higher within a data center network.
What type of cable does the technician need?
UTP
Coaxial cable
pg. 4
CompTIA A+ Certmaster test Complete Questions and Correct
Detailed Answers (Verified Answers)
A tablet user connects a Bluetooth keyboard. What would be expected in the
pairing process?
Enter a PIN.
Test connectivity.
Perform a sync.
Perform multifactor authentication.
Ans: Enter a pin
What cable has a data rate of 480 Mbps
Ans: USB 2.0
A technician notices that the printer's output was not expected and needs to check
the printer's control panel to investigate the problem. What does the technician need
to check
Toner
Developer roller
pg. 1
, March 25
Calibration
Maintenance kit
Ans: Calibration
A remote connection for users to access a company's private network requires
access from an external IP. How might a laptop user test this connection if they are
currently connected to the company's internal network?
Enable pairing.
Use a hotspot.
Use the correct PIN.
Update the PRL.
Ans: Use a hotspot
A company asked a network engineer to provide a solution that will allow a hosted
application to be highly available if one or more servers are offline. They have plenty
of resources to provide a cluster of servers that can run the application. Still, the
company is looking for direction on making the application seamlessly available to
customers. What solution would the engineer implement for this request?
pg. 2
, March 25
Spam gateway
Proxy server
Web server
Load balancer
Ans: Load balancer
A user complains the cursor on their laptop jumps around on its own. This is
especially bad while they are typing. What could solve this problem? (Select all that
apply.)
Disable the touchpad.
Replace the backlight.
Replace the battery.
Configure input options.
Ans: Disable the touchpad.
and
Configure input options.
Which universal serial bus (USB) 2 connector is square with a beveled top that a
technician can use for printers
pg. 3
, March 25
Ans: USB Type B
A network engineer must set up an office's new wireless access points (APs). After
installing the access points, the engineer must ensure they set up the radio signals
correctly and that all office areas receive the most efficient signal possible. What tool
will the engineer utilize?
Wi-Fi analyzer
Toner probe
Cable tester
Loopback plug
Ans: Wi-Fi analyzer
A technician needs a cable for 10G Ethernet and higher within a data center network.
What type of cable does the technician need?
UTP
Coaxial cable
pg. 4
