Bennett Mechanical Aptitude Test Questions with Correct Answers Latest Update 2025 Graded A+

Bennett Mechanical Aptitude Test Questions with Correct Answers Latest Update 2025 Graded A+ component that restricts the electric current flow to a single direction - Answers Diode an electrical component that can break an electrical circuit, interrupting the current or diverting it from one conductor to another? - Answers switch a measurement unit for electric resistance - Answers Ohm Ohm's Law - Answers current passing through a conductor between two points is directly proportional to the potentail difference across them. I = V/R, or V=IR, or R= V/I V=potential difference measured across the conductor in volts R=Resistance of the conductor in ohms I=currrent in amperes measurement unit for electric potential - Answers Volt Electric power is measured in - Answers Watts P=IV A unit of an electric current - Answers Ampere (amp). One amp is the electrical charge of one coulomb that flows in an electrical circuit in one second Unit of electric charge - Answers Coulomb (koolom) direction electricity flows - Answers from pos to neg an electrical component used to temporarily store electrical energy in an electric field - Answers capacitor BOTH ARE TYPES OF ELECTRODES Cathode: elecrode through which current flows out Anode: electrode through which current flows into the device - Answers Cathode and anode what is an electric current? - Answers charge per time units The difference in electric potential between two points is called: - Answers Voltage The rate at which electric energy is transferred by an electric circuit is defined as: - Answ