CSA W47.1 AND CSA W59 EXAM SCRIPT 2025/2026
QUESTIONS WITH ANSWERS GRADED A+
✔✔The largest size notch in a flare cut edge that the fabricator can remove by grinding
without approval is: - ✔✔5mm
✔✔A 6 mm fillet weld, the actual minimum size must be deposited if the gap between
par is 0.8 mm: - ✔✔6mm
✔✔Which type of weld is prohibited for dynamically loaded structures: - ✔✔Slot Weld
✔✔For the purpose of CSA W59 standard, welds shall be classified as: - ✔✔all of the
above (Plug, Fillet, Groove).
✔✔SAW fillet welds made in flat or horizontal position, except single pass fillet welds
made in
horizontal position shall not exceed - ✔✔8mm
✔✔In Shielded Metal Arc Welding (SMAW), the max size electrode for vertical fillets
and groove welds are: - ✔✔9mm
✔✔Connections or splices in beams or girders, when made by groove welds shall be: -
✔✔Complete penetration on back plate and complete penetration groove weld
✔✔Peening shall be permitted on quenched and tempered steel when: - ✔✔Shall not
be permitted.
✔✔Visual inspection of welded joints subject to high restrain shall be delayed as long as
practicable
and preferably not less than - ✔✔48 hours
✔✔The minimum effective length of a fillet weld shall be or times the size of the fillet: -
✔✔40 or 4 times
✔✔Using E480XX basic electrode, single pass fillet welds up to maximum may be: -
✔✔6mm
✔✔Arc Strikes: - ✔✔Outside area of permanent weld should be avoided.
✔✔Geometric unsharpness limit for plate thickness of 12 mm is: - ✔✔0.127 mm
✔✔On statically loaded structures scanning levels for Ultrasonic Testing, for sound path
distances 63 to 125 is: - ✔✔+19
, ✔✔Ultrasonic Inspection of dynamically loaded structures, for defects having a rating of
+10.5 on 32 mm steel plate, the maximum allowable size is: - ✔✔Reject, regardless of
the length.
✔✔Radiographic Inspection on structure loaded 32 mm steel plate, the maximum
allowable size of a slag line for tension loaded structures is: - ✔✔10 mm
✔✔Beam splices of tension members, made by groove welds shall be: - ✔✔Complete
joint penetration
✔✔This standard shall be administered by: - ✔✔the bureau
✔✔An individual who welds by manipulating an electrode holder or welding gun: -
✔✔welder
✔✔All tests on fluted materials such as decking shall be performed on material or
_________ less in thickness. - ✔✔3mm
✔✔For "S" classification for GTAW, the welder must stop, start in the root of the fillet: -
✔✔option 1 only
✔✔The number of test specimens required for "S" classification, MCAW process,
Class "V", option 3 is: - ✔✔3
✔✔6. Undercut shall not be more than _____ deep occurring in test samples. - ✔✔l mm
✔✔The maximum size discontinuity permitted in a weld with 20 mm effective throat is: -
✔✔6mm
✔✔A welding supervisor, a graduate of the WET Program, shall have a minimum
of_____ years of welding-related experience pertinent to the
company's type of operations. - ✔✔3
✔✔For arc spot welds-procedure qualifications, a test on a given decking thickness, T,
shall qualify a procedure within the same scope of essential
variables for materials in the range of________ to a maximum of 3 mm. - ✔✔0.75T to
1.38T
✔✔For welding of stainless steel, the provisions of AWS standard_________
may be used for the qualification of welding procedures and personnel. - ✔✔A5.0
✔✔classification refers to a welder's ability to deposit tack welds. - ✔✔WT
QUESTIONS WITH ANSWERS GRADED A+
✔✔The largest size notch in a flare cut edge that the fabricator can remove by grinding
without approval is: - ✔✔5mm
✔✔A 6 mm fillet weld, the actual minimum size must be deposited if the gap between
par is 0.8 mm: - ✔✔6mm
✔✔Which type of weld is prohibited for dynamically loaded structures: - ✔✔Slot Weld
✔✔For the purpose of CSA W59 standard, welds shall be classified as: - ✔✔all of the
above (Plug, Fillet, Groove).
✔✔SAW fillet welds made in flat or horizontal position, except single pass fillet welds
made in
horizontal position shall not exceed - ✔✔8mm
✔✔In Shielded Metal Arc Welding (SMAW), the max size electrode for vertical fillets
and groove welds are: - ✔✔9mm
✔✔Connections or splices in beams or girders, when made by groove welds shall be: -
✔✔Complete penetration on back plate and complete penetration groove weld
✔✔Peening shall be permitted on quenched and tempered steel when: - ✔✔Shall not
be permitted.
✔✔Visual inspection of welded joints subject to high restrain shall be delayed as long as
practicable
and preferably not less than - ✔✔48 hours
✔✔The minimum effective length of a fillet weld shall be or times the size of the fillet: -
✔✔40 or 4 times
✔✔Using E480XX basic electrode, single pass fillet welds up to maximum may be: -
✔✔6mm
✔✔Arc Strikes: - ✔✔Outside area of permanent weld should be avoided.
✔✔Geometric unsharpness limit for plate thickness of 12 mm is: - ✔✔0.127 mm
✔✔On statically loaded structures scanning levels for Ultrasonic Testing, for sound path
distances 63 to 125 is: - ✔✔+19
, ✔✔Ultrasonic Inspection of dynamically loaded structures, for defects having a rating of
+10.5 on 32 mm steel plate, the maximum allowable size is: - ✔✔Reject, regardless of
the length.
✔✔Radiographic Inspection on structure loaded 32 mm steel plate, the maximum
allowable size of a slag line for tension loaded structures is: - ✔✔10 mm
✔✔Beam splices of tension members, made by groove welds shall be: - ✔✔Complete
joint penetration
✔✔This standard shall be administered by: - ✔✔the bureau
✔✔An individual who welds by manipulating an electrode holder or welding gun: -
✔✔welder
✔✔All tests on fluted materials such as decking shall be performed on material or
_________ less in thickness. - ✔✔3mm
✔✔For "S" classification for GTAW, the welder must stop, start in the root of the fillet: -
✔✔option 1 only
✔✔The number of test specimens required for "S" classification, MCAW process,
Class "V", option 3 is: - ✔✔3
✔✔6. Undercut shall not be more than _____ deep occurring in test samples. - ✔✔l mm
✔✔The maximum size discontinuity permitted in a weld with 20 mm effective throat is: -
✔✔6mm
✔✔A welding supervisor, a graduate of the WET Program, shall have a minimum
of_____ years of welding-related experience pertinent to the
company's type of operations. - ✔✔3
✔✔For arc spot welds-procedure qualifications, a test on a given decking thickness, T,
shall qualify a procedure within the same scope of essential
variables for materials in the range of________ to a maximum of 3 mm. - ✔✔0.75T to
1.38T
✔✔For welding of stainless steel, the provisions of AWS standard_________
may be used for the qualification of welding procedures and personnel. - ✔✔A5.0
✔✔classification refers to a welder's ability to deposit tack welds. - ✔✔WT
