CWB 47.1
A separate qualification is required for switching the gas metal arc welding process's metal
transfer method from short circuiting to spray or globular. True or false? - ANSTrue
A pony is required for a company that only performs welding-intensive erection work to be
certified in accordance with CSA standard W47.1. Is this true or false? - ANSTrue A welders
qualification may be revoked by the Canadian Welding Bureau if the welder has NOT been
engaged in a given process for a period of three months or more.
True or false? - ANSTrue
Is it acceptable for a division 1 company to hire a welding supervisor with two years of
fabrication experience? Is this true or false? - ANSTrue Can certification be considered an
endorsement of a company's manufactured goods? False or true? - ANSFalse A company
seeking certification must meet and adhere to the requirements outlined in CSA Standard
W47.1. False or True? - ANSFalse CSA Standard W47.1 requires each designated plant,
shop or section to meet the requirements of certification within this standard with respect to
welders, welding procedures specification, welding procedure data sheets, welding
supervisor and welding engineer, where applicable
False or true? - ANSFalse Each supervisor shall be able to read drawings and to properly
interpret welding symbols.
True or false? - ANSTrue
Each supervisor must be familiar with? A) Welding flaws B) Quality assurance C)
Calculating D) both a and c have a direct connection to their work. - ANSD The Canadian
welding bureau must verify that the electrodes used in welding personnel qualification tests
comply with the most recent edition of CSA Standard W48 or the appropriate AWS A5 series
of standards. False or true? - ANSFalse What is the validity of a welder's qualification? A) at
any time B) for six months C) for a year D) Two years—ANSD For how long does a welding
operators qualification remain in effect?
A) indefinitely, unless there is a reason to question his/her ability
B) for six months C) one year
D) two years - ANSA
How long does a tack welder's certification last? A) one year
B) two year
C) indefinitely, unless there is a reason to doubt their abilities. D) ANSC: five years How
many divisions of certification are specified in CSA Standard W47.1 ?
A) one
B) two
C) three
D) The fourth ANSC If a welder has qualified on a standard test assembly, what Range of
material thickness is he/she now qualified to weld?
A) 1.5 mm (1/16 in) and thicker
B) Thicker than 3 mm (1/8 in) C) up to 5 mm (3/6 in)
D) 3 to 12 millimeters (1/2 inch) - ANSB If there is a reason to doubt the welders ability,
his/her qualification is suspended immediately and shall be required to pass a check test in
the position and class held
A separate qualification is required for switching the gas metal arc welding process's metal
transfer method from short circuiting to spray or globular. True or false? - ANSTrue
A pony is required for a company that only performs welding-intensive erection work to be
certified in accordance with CSA standard W47.1. Is this true or false? - ANSTrue A welders
qualification may be revoked by the Canadian Welding Bureau if the welder has NOT been
engaged in a given process for a period of three months or more.
True or false? - ANSTrue
Is it acceptable for a division 1 company to hire a welding supervisor with two years of
fabrication experience? Is this true or false? - ANSTrue Can certification be considered an
endorsement of a company's manufactured goods? False or true? - ANSFalse A company
seeking certification must meet and adhere to the requirements outlined in CSA Standard
W47.1. False or True? - ANSFalse CSA Standard W47.1 requires each designated plant,
shop or section to meet the requirements of certification within this standard with respect to
welders, welding procedures specification, welding procedure data sheets, welding
supervisor and welding engineer, where applicable
False or true? - ANSFalse Each supervisor shall be able to read drawings and to properly
interpret welding symbols.
True or false? - ANSTrue
Each supervisor must be familiar with? A) Welding flaws B) Quality assurance C)
Calculating D) both a and c have a direct connection to their work. - ANSD The Canadian
welding bureau must verify that the electrodes used in welding personnel qualification tests
comply with the most recent edition of CSA Standard W48 or the appropriate AWS A5 series
of standards. False or true? - ANSFalse What is the validity of a welder's qualification? A) at
any time B) for six months C) for a year D) Two years—ANSD For how long does a welding
operators qualification remain in effect?
A) indefinitely, unless there is a reason to question his/her ability
B) for six months C) one year
D) two years - ANSA
How long does a tack welder's certification last? A) one year
B) two year
C) indefinitely, unless there is a reason to doubt their abilities. D) ANSC: five years How
many divisions of certification are specified in CSA Standard W47.1 ?
A) one
B) two
C) three
D) The fourth ANSC If a welder has qualified on a standard test assembly, what Range of
material thickness is he/she now qualified to weld?
A) 1.5 mm (1/16 in) and thicker
B) Thicker than 3 mm (1/8 in) C) up to 5 mm (3/6 in)
D) 3 to 12 millimeters (1/2 inch) - ANSB If there is a reason to doubt the welders ability,
his/her qualification is suspended immediately and shall be required to pass a check test in
the position and class held
