Union Pacific Conductor Final Exam: Questions With
Complete Solutions
What is a length of a track between consecutive block signal or between a
block signal and the end of the block system limit.
A. Block
B. Main track
C crossing Right Ans - A. Block
What is the appearance of a fixed or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons Right Ans - B. Signal aspect
According to rules hierarchy the system special instruction can be updated by
which of the following?
A. Service unit general order
B. General notice
C. System general order Right Ans - C. System general order
What is an absolute signal that is controlled by a controlled operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal Right Ans - C. Controlled signal
Your duties require you to cross through a train or a standing cut of cars. After
proper protection is provided and before crossing over from one side of the
equipment to the other side, you should?
A. Choose equipment carefully, using cars equipped with a crossover platform
and handholds (when available).
B. On equipment where crossover platforms and handholds are not available,
use end of car structural bracing to maintain 3-point contact, il sate to do so.
,C. Both answers are correct. Right Ans - C. Both answers are correct
What is a system of tracks, other than main tracks and sidings, that is used for
making up trains, storng cars, and other purposes?
A. Siding
B. Main track
C. Yard Right Ans - C. Yard
To enter an area between two adjacent tracks is the glossary definition of ?
A. Breach
B. Crossing Through
C. Red Zone Right Ans - A. Breach
Employees must not get on or off cars and engines (whether standing or
moving) except when required in the performance of duty, and only when it
can be done safely. When getting off standing equipment:
A.Let go with both hands before your feet touch the ground or other support.
B.Retain a grip with both hands on the handhold until both feet are firmly
placed on the ground or other support.
C. Place one foot on the ground, then let go with one hand and place the other
foot on the ground before letting go. Right Ans - B.Retain a grip with both
hands on the handhold until both feet are firmly placed on the ground or other
support.
Employees must be careful to prevent injuring themselves or others. They
must be _________ when performing their dutics and plan their work to avoid
injury.
A. Alert and Attentive
, B. Responsive and Activel
C. Organized and Permissive Right Ans - A. Alert and attentive
When an engine, train or cars are left unattended, what must you do to secure
them?.
A. Apply air brakes to hold the train in place.
B. Make a full-service reduction and place the train in emergency.
C. Apply a suflicient number of hand brakes to prevent movement. Right
Ans - C. Apply a suflicient number of hand brakes to prevent movement.
How may rules be issued, canceled or modified?
A. General Notices
B. Track Bulletins, Gencral Orders, or Special Instructions
C. Issuing new GCOR, Air Brake, or Safety rules is the only way to change or
modity the rules. Right Ans - B. Track Bulletins, Gencral Orders, or Special
Instructions
Your engineer notices there is a revision to the timetable. Where will this
information be contained?.
A. Work Order Reporting
B. Locomotive Consist Report
C. Subdivision General Order Right Ans - C. Subdivision General Order
Where can the "Explanation of Characters" table be found?
A. System Special Instructions. Item 1
B. Inside front cover of the timetable and the back cover of the SSI
C. Timetable subdivision page, Section SI-23, as defined by CFR242 Right
Ans - B. Inside front cover of the timetable and the back cover of the SSI
When you are near a passing train, where should you stand?
A. On the adjacent track so you can see defects on passing cars
B. Away from the track to avoid being struck by car doors or
protruding/falling articles
Complete Solutions
What is a length of a track between consecutive block signal or between a
block signal and the end of the block system limit.
A. Block
B. Main track
C crossing Right Ans - A. Block
What is the appearance of a fixed or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons Right Ans - B. Signal aspect
According to rules hierarchy the system special instruction can be updated by
which of the following?
A. Service unit general order
B. General notice
C. System general order Right Ans - C. System general order
What is an absolute signal that is controlled by a controlled operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal Right Ans - C. Controlled signal
Your duties require you to cross through a train or a standing cut of cars. After
proper protection is provided and before crossing over from one side of the
equipment to the other side, you should?
A. Choose equipment carefully, using cars equipped with a crossover platform
and handholds (when available).
B. On equipment where crossover platforms and handholds are not available,
use end of car structural bracing to maintain 3-point contact, il sate to do so.
,C. Both answers are correct. Right Ans - C. Both answers are correct
What is a system of tracks, other than main tracks and sidings, that is used for
making up trains, storng cars, and other purposes?
A. Siding
B. Main track
C. Yard Right Ans - C. Yard
To enter an area between two adjacent tracks is the glossary definition of ?
A. Breach
B. Crossing Through
C. Red Zone Right Ans - A. Breach
Employees must not get on or off cars and engines (whether standing or
moving) except when required in the performance of duty, and only when it
can be done safely. When getting off standing equipment:
A.Let go with both hands before your feet touch the ground or other support.
B.Retain a grip with both hands on the handhold until both feet are firmly
placed on the ground or other support.
C. Place one foot on the ground, then let go with one hand and place the other
foot on the ground before letting go. Right Ans - B.Retain a grip with both
hands on the handhold until both feet are firmly placed on the ground or other
support.
Employees must be careful to prevent injuring themselves or others. They
must be _________ when performing their dutics and plan their work to avoid
injury.
A. Alert and Attentive
, B. Responsive and Activel
C. Organized and Permissive Right Ans - A. Alert and attentive
When an engine, train or cars are left unattended, what must you do to secure
them?.
A. Apply air brakes to hold the train in place.
B. Make a full-service reduction and place the train in emergency.
C. Apply a suflicient number of hand brakes to prevent movement. Right
Ans - C. Apply a suflicient number of hand brakes to prevent movement.
How may rules be issued, canceled or modified?
A. General Notices
B. Track Bulletins, Gencral Orders, or Special Instructions
C. Issuing new GCOR, Air Brake, or Safety rules is the only way to change or
modity the rules. Right Ans - B. Track Bulletins, Gencral Orders, or Special
Instructions
Your engineer notices there is a revision to the timetable. Where will this
information be contained?.
A. Work Order Reporting
B. Locomotive Consist Report
C. Subdivision General Order Right Ans - C. Subdivision General Order
Where can the "Explanation of Characters" table be found?
A. System Special Instructions. Item 1
B. Inside front cover of the timetable and the back cover of the SSI
C. Timetable subdivision page, Section SI-23, as defined by CFR242 Right
Ans - B. Inside front cover of the timetable and the back cover of the SSI
When you are near a passing train, where should you stand?
A. On the adjacent track so you can see defects on passing cars
B. Away from the track to avoid being struck by car doors or
protruding/falling articles
