Maintenance Forms and Records Test
Questions and Answers 100% Pass
Where is the record of compliance with Airworthiness Directives or manufacturers'
service bulletins normally indicated? - ✔✔Aircraft maintenance records.
If work performed on an aircraft has been done satisfactorily, the signature of an
authorized person on the maintenance records for maintenance or alterations
performed constitutes - ✔✔approval for return to service only for the work performed.
During an annual inspection, if a defect is found which makes the aircraft
unairworthy,the person disapproving must - ✔✔provide a written notice of the defect
to the owner
What is the means by which the FAA notifies aircraft owners and other interested
persons of unsafe conditions and prescribes the condition under which the product may
continue to be operated? - ✔✔Airworthiness Directives.
Which is an appliance major repair? - ✔✔Overhaul of a hydraulic pressure pump.
Where should you find this entry? - ✔✔FAA Form 337
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 1
, Which maintenance action is an airframe major repair? - ✔✔The repair of portions of
skin sheets by making additional seams.
Which aircraft record entry is the best description of the replacement of several
damaged heli-coils in a casting? - ✔✔Eight 1/4 -- 20 inch standard heli-coils were
replaced.
Which maintenance record entry best describes the action taken for a control cable
showing approximately 20 percent wear on several of the individual outer wires at a
fairlead? - ✔✔Wear within acceptable limits, repair not necessary.
Which maintenance record entry best describes the action taken for a .125-inch deep
dent in a straight section of 1/2-inch aluminum alloy tubing? - ✔✔Dented section
removed and replaced with identical new tubing flared to 37*.
Which statement is true regarding the requirements for maintenance record format? -
✔✔Any format that provides record continuity and includes the required information
may be used.
When a 100-hours inspection is completed, if separate maintenance records for the
airframe, powerplant(s), and propeller(s) are maintained, where is the entry for the
inspection recorded? - ✔✔In each record.
For aircraft operated under part 91, when is aircraft total time required to be recorded
in aircraft maintenance records? - ✔✔After satisfactorily completing inspections.
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 2
Questions and Answers 100% Pass
Where is the record of compliance with Airworthiness Directives or manufacturers'
service bulletins normally indicated? - ✔✔Aircraft maintenance records.
If work performed on an aircraft has been done satisfactorily, the signature of an
authorized person on the maintenance records for maintenance or alterations
performed constitutes - ✔✔approval for return to service only for the work performed.
During an annual inspection, if a defect is found which makes the aircraft
unairworthy,the person disapproving must - ✔✔provide a written notice of the defect
to the owner
What is the means by which the FAA notifies aircraft owners and other interested
persons of unsafe conditions and prescribes the condition under which the product may
continue to be operated? - ✔✔Airworthiness Directives.
Which is an appliance major repair? - ✔✔Overhaul of a hydraulic pressure pump.
Where should you find this entry? - ✔✔FAA Form 337
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 1
, Which maintenance action is an airframe major repair? - ✔✔The repair of portions of
skin sheets by making additional seams.
Which aircraft record entry is the best description of the replacement of several
damaged heli-coils in a casting? - ✔✔Eight 1/4 -- 20 inch standard heli-coils were
replaced.
Which maintenance record entry best describes the action taken for a control cable
showing approximately 20 percent wear on several of the individual outer wires at a
fairlead? - ✔✔Wear within acceptable limits, repair not necessary.
Which maintenance record entry best describes the action taken for a .125-inch deep
dent in a straight section of 1/2-inch aluminum alloy tubing? - ✔✔Dented section
removed and replaced with identical new tubing flared to 37*.
Which statement is true regarding the requirements for maintenance record format? -
✔✔Any format that provides record continuity and includes the required information
may be used.
When a 100-hours inspection is completed, if separate maintenance records for the
airframe, powerplant(s), and propeller(s) are maintained, where is the entry for the
inspection recorded? - ✔✔In each record.
For aircraft operated under part 91, when is aircraft total time required to be recorded
in aircraft maintenance records? - ✔✔After satisfactorily completing inspections.
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 2
