©THESTAR 2024/2025 ALL RIGHTS RESERVED 12:54PM.
NCCER Core Module 1 Exam Questions
And Answers 2025 Update.
Companies with strong safety cultures usually have lower? - Answer✔Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of -
Answer✔unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing each
step for
potential hazards is called a _____. - Answer✔Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is referred to as
_____. - Answer✔Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from
falls is to _____. - Answer✔Cover and mark it
The D-ring or support point on a safety harness should be placed _____. - Answer✔Between
the shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. - Answer✔Competent
person
Lanyards that have no shock-absorbing features are used for _____. - Answer✔Positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the
point where
the ladder touches the platform or roof by at least _____. - Answer✔3 Feet
When performing overhead work on scaffolding, what protective measures must be taken to
prevent objects
from falling and striking a person below? - Answer✔toe boards, debris nets, or canopies
When stacking materials such as bricks or block, do not stack materials beyond a _____. -
Answer✔4:1 Ratio
Benching systems are prohibited in _____. - Answer✔Type C
1
NCCER Core Module 1 Exam Questions
And Answers 2025 Update.
Companies with strong safety cultures usually have lower? - Answer✔Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of -
Answer✔unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing each
step for
potential hazards is called a _____. - Answer✔Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is referred to as
_____. - Answer✔Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from
falls is to _____. - Answer✔Cover and mark it
The D-ring or support point on a safety harness should be placed _____. - Answer✔Between
the shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. - Answer✔Competent
person
Lanyards that have no shock-absorbing features are used for _____. - Answer✔Positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the
point where
the ladder touches the platform or roof by at least _____. - Answer✔3 Feet
When performing overhead work on scaffolding, what protective measures must be taken to
prevent objects
from falling and striking a person below? - Answer✔toe boards, debris nets, or canopies
When stacking materials such as bricks or block, do not stack materials beyond a _____. -
Answer✔4:1 Ratio
Benching systems are prohibited in _____. - Answer✔Type C
1
