Remote Pilot Unmanned Aircraft System
3 Questions and Answers Graded A+
What is the primary responsibility of a Remote Pilot in Command before launching a drone for a
commercial operation?
✔✔ Ensuring the aircraft is in safe operating condition and all pre-flight checks are completed.
How can a remote pilot determine if a temporary flight restriction (TFR) is in effect for their
planned flight area?
✔✔ By checking FAA notices and using authorized aeronautical sources before takeoff.
Why is it important to maintain visual line of sight with a drone during flight?
✔✔ To ensure the aircraft is operated safely and can avoid obstacles or other aircraft.
What action should a remote pilot take if they experience a loss of GPS signal mid-flight?
✔✔ Maintain manual control, stabilize the aircraft, and safely return to the launch site if
necessary.
When operating a drone near a heliport, what precaution should be taken?
1
,✔✔ Maintain situational awareness and yield right of way to manned aircraft at all times.
What should a remote pilot do if an unexpected aircraft enters their operational airspace?
✔✔ Immediately maneuver the drone to avoid conflict and maintain a safe separation.
How can a remote pilot reduce the risk of electromagnetic interference affecting their drone’s
control system?
✔✔ Avoid flying near high-power transmission lines, radio towers, and large metal structures.
What is a key indicator of unstable weather that could impact drone operations?
✔✔ Sudden wind gusts, rapid cloud development, or changes in atmospheric pressure.
Why is it important to check battery voltage before and during flight?
✔✔ To prevent unexpected power loss and ensure a safe return to the landing zone.
What is the purpose of a pre-flight site assessment?
✔✔ To identify hazards, evaluate airspace restrictions, and determine safe takeoff and landing
areas.
2
, How should a remote pilot handle a drone that begins drifting uncontrollably?
✔✔ Regain control using manual inputs or initiate an emergency landing procedure.
What is one way to enhance situational awareness while flying a drone?
✔✔ Use a visual observer to assist in identifying potential hazards.
Why should a remote pilot avoid flying over people who are not involved in the operation?
✔✔ To minimize the risk of injury in case of an unexpected drone failure.
What is a critical step in preventing flyaways?
✔✔ Ensuring the drone’s compass and GPS are properly calibrated before takeoff.
Why is it important to update firmware regularly on a drone?
✔✔ To fix software bugs, improve performance, and ensure compliance with new regulations.
What should a remote pilot do if they receive a low battery warning during flight?
✔✔ Immediately return the drone to the landing area to prevent power loss in the air.
3
3 Questions and Answers Graded A+
What is the primary responsibility of a Remote Pilot in Command before launching a drone for a
commercial operation?
✔✔ Ensuring the aircraft is in safe operating condition and all pre-flight checks are completed.
How can a remote pilot determine if a temporary flight restriction (TFR) is in effect for their
planned flight area?
✔✔ By checking FAA notices and using authorized aeronautical sources before takeoff.
Why is it important to maintain visual line of sight with a drone during flight?
✔✔ To ensure the aircraft is operated safely and can avoid obstacles or other aircraft.
What action should a remote pilot take if they experience a loss of GPS signal mid-flight?
✔✔ Maintain manual control, stabilize the aircraft, and safely return to the launch site if
necessary.
When operating a drone near a heliport, what precaution should be taken?
1
,✔✔ Maintain situational awareness and yield right of way to manned aircraft at all times.
What should a remote pilot do if an unexpected aircraft enters their operational airspace?
✔✔ Immediately maneuver the drone to avoid conflict and maintain a safe separation.
How can a remote pilot reduce the risk of electromagnetic interference affecting their drone’s
control system?
✔✔ Avoid flying near high-power transmission lines, radio towers, and large metal structures.
What is a key indicator of unstable weather that could impact drone operations?
✔✔ Sudden wind gusts, rapid cloud development, or changes in atmospheric pressure.
Why is it important to check battery voltage before and during flight?
✔✔ To prevent unexpected power loss and ensure a safe return to the landing zone.
What is the purpose of a pre-flight site assessment?
✔✔ To identify hazards, evaluate airspace restrictions, and determine safe takeoff and landing
areas.
2
, How should a remote pilot handle a drone that begins drifting uncontrollably?
✔✔ Regain control using manual inputs or initiate an emergency landing procedure.
What is one way to enhance situational awareness while flying a drone?
✔✔ Use a visual observer to assist in identifying potential hazards.
Why should a remote pilot avoid flying over people who are not involved in the operation?
✔✔ To minimize the risk of injury in case of an unexpected drone failure.
What is a critical step in preventing flyaways?
✔✔ Ensuring the drone’s compass and GPS are properly calibrated before takeoff.
Why is it important to update firmware regularly on a drone?
✔✔ To fix software bugs, improve performance, and ensure compliance with new regulations.
What should a remote pilot do if they receive a low battery warning during flight?
✔✔ Immediately return the drone to the landing area to prevent power loss in the air.
3
