Massachusetts (MA) Journeyman Gas Fitter Practice Exam
Question 1: What is the primary purpose of Massachusetts General Laws Chapter 142?
A) Regulate plumbing and gas fitting standards
B) Oversee electrical installations
C) Govern building construction methods
D) Control environmental emissions
Explanation: Chapter 142 establishes the legal framework specifically for plumbing and gas
fitting in Massachusetts.
Question 2: Which document sets the administrative rules for gas fitters under the Board of
State Examiners?
A) 248 CMR Sections 3–11
B) MGL Chapter 142
C) The State Construction Code
D) Local municipal ordinances
Explanation: The administrative regulations (Sections 3 through 11 of 248 CMR) detail the rules
that gas fitters must follow.
Question 3: Who is responsible for enforcing the provisions of MGL Chapter 142?
A) Local building inspectors
B) Board of State Examiners of Plumbers and Gas Fitters
C) Environmental Protection Agency
D) The Department of Public Health
Explanation: The Board of State Examiners enforces the rules set forth in MGL Chapter 142 for
plumbing and gas fitting.
Question 4: What does 248 CMR primarily address for gas fitters?
A) Licensing and continuing education requirements
B) Electrical wiring standards
C) Environmental regulations
D) Structural engineering protocols
Explanation: 248 CMR specifies administrative rules—including licensing and work practices—
for plumbers and gas fitters.
Question 5: Which regulation section deals with modifications to existing gas systems?
A) Section 7
B) Sections 4 and 5
C) Section 10
D) Section 3
Explanation: Sections 4 and 5 of 248 CMR cover regulations regarding modifications to existing
gas systems.
,Question 6: What must a gas fitter obtain before beginning major work?
A) A construction loan
B) A permit and inspection approval
C) A zoning variance
D) A municipal waiver
Explanation: Permits and subsequent inspections are required to ensure compliance with state
and local codes.
Question 7: Which law ensures that gas fitting activities meet state safety standards?
A) MGL Chapter 142
B) The Federal Energy Act
C) The Clean Air Act
D) Occupational Safety and Health Administration guidelines
Explanation: MGL Chapter 142 is designed to secure safe practices in gas fitting and plumbing.
Question 8: In Massachusetts, which agency reviews gas fitter applications?
A) Board of State Examiners of Plumbers and Gas Fitters
B) Massachusetts Department of Energy Resources
C) Local Fire Department
D) State Electrical Board
Explanation: The Board of State Examiners is the regulatory body reviewing and approving
applications.
Question 9: How often must a gas fitter’s license be renewed according to state regulations?
A) Every year
B) Every two years
C) Every five years
D) It never expires
Explanation: The renewal period is set by administrative regulation; in Massachusetts, licenses
are typically renewed biennially.
Question 10: What is the role of inspections in the gas fitting permit process?
A) To update local tax records
B) To ensure installation meets safety and code standards
C) To promote energy efficiency
D) To certify architectural design
Explanation: Inspections verify that all installations adhere to the required safety and code
standards.
Question 11: Which document outlines the safety and excavation protocols for gas fitters?
A) MGL Chapter 142
B) 248 CMR Sections 3–11
C) The National Fire Protection Association (NFPA) Code
D) Local Public Works Manual
Explanation: The administrative regulations include detailed protocols for safety and excavation
relevant to gas work.
,Question 12: Before a gas installation begins, what regulatory step is mandatory?
A) A soil test
B) An approved permit
C) A neighborhood survey
D) An energy audit
Explanation: An approved permit is mandatory before beginning any installation work.
Question 13: Which section of the regulations is most likely to address recordkeeping
requirements for inspections?
A) Section 3
B) Section 6
C) Section 11
D) Section 8
Explanation: Administrative regulations detail recordkeeping, and Section 11 often includes
requirements for maintaining inspection reports.
Question 14: What is one of the primary benefits of complying with MGL Chapter 142?
A) Reduced material costs
B) Increased public safety
C) Faster project completion
D) Enhanced aesthetic design
Explanation: Compliance ensures that public safety is maintained through adherence to rigorous
standards.
Question 15: Who ultimately approves a gas fitting permit in Massachusetts?
A) The local mayor
B) The Board of State Examiners
C) The state governor
D) A licensed contractor
Explanation: The Board of State Examiners is responsible for reviewing and approving permits.
Question 16: What is the consequence of failing to obtain a proper permit for gas fitting
work?
A) A tax rebate
B) Legal penalties and possible shutdown
C) Automatic inspection approval
D) Increased insurance coverage
Explanation: Failing to obtain a permit can lead to fines, legal penalties, and work stoppage.
Question 17: Which of the following best describes the legal framework for gas fitting in
Massachusetts?
A) Federal law only
B) A combination of state laws and administrative regulations
C) Local ordinances exclusively
D) International safety codes
, Explanation: Gas fitting is regulated by both state laws (MGL Chapter 142) and administrative
regulations (248 CMR).
Question 18: How does the administrative regulation enhance the legal framework provided
by MGL Chapter 142?
A) By adding international standards
B) By providing detailed work practice guidelines
C) By eliminating safety inspections
D) By increasing licensing fees only
Explanation: The regulation supplements the law by outlining detailed guidelines and work
practices.
Question 19: What is a common subject covered under the inspection protocols in 248
CMR?
A) Aesthetic appeal of installations
B) Correct sizing of gas piping systems
C) The color scheme of equipment
D) Advertising practices
Explanation: Inspections focus on technical aspects like proper sizing and installation of gas
piping.
Question 20: Under Massachusetts regulations, who is held accountable for adhering to
permit stipulations?
A) The equipment manufacturer
B) The licensed gas fitter
C) The property owner only
D) The local utility company
Explanation: Licensed gas fitters are responsible for following permit stipulations to ensure
safety.
Question 21: What ensures that modifications to gas systems are performed safely?
A) A complete redesign of the system
B) Following Sections 4 and 5 of 248 CMR
C) Only using new equipment
D) Hiring an electrical contractor
Explanation: Sections 4 and 5 specify safe practices for modifying existing gas systems.
Question 22: Which regulation helps to standardize safety practices across Massachusetts?
A) Local zoning codes
B) MGL Chapter 142 and 248 CMR
C) Federal tax guidelines
D) Private contractor manuals
Explanation: The combination of state law and administrative regulation creates a uniform safety
standard.
Question 1: What is the primary purpose of Massachusetts General Laws Chapter 142?
A) Regulate plumbing and gas fitting standards
B) Oversee electrical installations
C) Govern building construction methods
D) Control environmental emissions
Explanation: Chapter 142 establishes the legal framework specifically for plumbing and gas
fitting in Massachusetts.
Question 2: Which document sets the administrative rules for gas fitters under the Board of
State Examiners?
A) 248 CMR Sections 3–11
B) MGL Chapter 142
C) The State Construction Code
D) Local municipal ordinances
Explanation: The administrative regulations (Sections 3 through 11 of 248 CMR) detail the rules
that gas fitters must follow.
Question 3: Who is responsible for enforcing the provisions of MGL Chapter 142?
A) Local building inspectors
B) Board of State Examiners of Plumbers and Gas Fitters
C) Environmental Protection Agency
D) The Department of Public Health
Explanation: The Board of State Examiners enforces the rules set forth in MGL Chapter 142 for
plumbing and gas fitting.
Question 4: What does 248 CMR primarily address for gas fitters?
A) Licensing and continuing education requirements
B) Electrical wiring standards
C) Environmental regulations
D) Structural engineering protocols
Explanation: 248 CMR specifies administrative rules—including licensing and work practices—
for plumbers and gas fitters.
Question 5: Which regulation section deals with modifications to existing gas systems?
A) Section 7
B) Sections 4 and 5
C) Section 10
D) Section 3
Explanation: Sections 4 and 5 of 248 CMR cover regulations regarding modifications to existing
gas systems.
,Question 6: What must a gas fitter obtain before beginning major work?
A) A construction loan
B) A permit and inspection approval
C) A zoning variance
D) A municipal waiver
Explanation: Permits and subsequent inspections are required to ensure compliance with state
and local codes.
Question 7: Which law ensures that gas fitting activities meet state safety standards?
A) MGL Chapter 142
B) The Federal Energy Act
C) The Clean Air Act
D) Occupational Safety and Health Administration guidelines
Explanation: MGL Chapter 142 is designed to secure safe practices in gas fitting and plumbing.
Question 8: In Massachusetts, which agency reviews gas fitter applications?
A) Board of State Examiners of Plumbers and Gas Fitters
B) Massachusetts Department of Energy Resources
C) Local Fire Department
D) State Electrical Board
Explanation: The Board of State Examiners is the regulatory body reviewing and approving
applications.
Question 9: How often must a gas fitter’s license be renewed according to state regulations?
A) Every year
B) Every two years
C) Every five years
D) It never expires
Explanation: The renewal period is set by administrative regulation; in Massachusetts, licenses
are typically renewed biennially.
Question 10: What is the role of inspections in the gas fitting permit process?
A) To update local tax records
B) To ensure installation meets safety and code standards
C) To promote energy efficiency
D) To certify architectural design
Explanation: Inspections verify that all installations adhere to the required safety and code
standards.
Question 11: Which document outlines the safety and excavation protocols for gas fitters?
A) MGL Chapter 142
B) 248 CMR Sections 3–11
C) The National Fire Protection Association (NFPA) Code
D) Local Public Works Manual
Explanation: The administrative regulations include detailed protocols for safety and excavation
relevant to gas work.
,Question 12: Before a gas installation begins, what regulatory step is mandatory?
A) A soil test
B) An approved permit
C) A neighborhood survey
D) An energy audit
Explanation: An approved permit is mandatory before beginning any installation work.
Question 13: Which section of the regulations is most likely to address recordkeeping
requirements for inspections?
A) Section 3
B) Section 6
C) Section 11
D) Section 8
Explanation: Administrative regulations detail recordkeeping, and Section 11 often includes
requirements for maintaining inspection reports.
Question 14: What is one of the primary benefits of complying with MGL Chapter 142?
A) Reduced material costs
B) Increased public safety
C) Faster project completion
D) Enhanced aesthetic design
Explanation: Compliance ensures that public safety is maintained through adherence to rigorous
standards.
Question 15: Who ultimately approves a gas fitting permit in Massachusetts?
A) The local mayor
B) The Board of State Examiners
C) The state governor
D) A licensed contractor
Explanation: The Board of State Examiners is responsible for reviewing and approving permits.
Question 16: What is the consequence of failing to obtain a proper permit for gas fitting
work?
A) A tax rebate
B) Legal penalties and possible shutdown
C) Automatic inspection approval
D) Increased insurance coverage
Explanation: Failing to obtain a permit can lead to fines, legal penalties, and work stoppage.
Question 17: Which of the following best describes the legal framework for gas fitting in
Massachusetts?
A) Federal law only
B) A combination of state laws and administrative regulations
C) Local ordinances exclusively
D) International safety codes
, Explanation: Gas fitting is regulated by both state laws (MGL Chapter 142) and administrative
regulations (248 CMR).
Question 18: How does the administrative regulation enhance the legal framework provided
by MGL Chapter 142?
A) By adding international standards
B) By providing detailed work practice guidelines
C) By eliminating safety inspections
D) By increasing licensing fees only
Explanation: The regulation supplements the law by outlining detailed guidelines and work
practices.
Question 19: What is a common subject covered under the inspection protocols in 248
CMR?
A) Aesthetic appeal of installations
B) Correct sizing of gas piping systems
C) The color scheme of equipment
D) Advertising practices
Explanation: Inspections focus on technical aspects like proper sizing and installation of gas
piping.
Question 20: Under Massachusetts regulations, who is held accountable for adhering to
permit stipulations?
A) The equipment manufacturer
B) The licensed gas fitter
C) The property owner only
D) The local utility company
Explanation: Licensed gas fitters are responsible for following permit stipulations to ensure
safety.
Question 21: What ensures that modifications to gas systems are performed safely?
A) A complete redesign of the system
B) Following Sections 4 and 5 of 248 CMR
C) Only using new equipment
D) Hiring an electrical contractor
Explanation: Sections 4 and 5 specify safe practices for modifying existing gas systems.
Question 22: Which regulation helps to standardize safety practices across Massachusetts?
A) Local zoning codes
B) MGL Chapter 142 and 248 CMR
C) Federal tax guidelines
D) Private contractor manuals
Explanation: The combination of state law and administrative regulation creates a uniform safety
standard.
