OSHA final exam Complete Questions and
answers, 100% Verified| Latest 2024
- ANSWER>>Introduction
OSHA's mission is to: - ANSWER>>Protect the safety and health of America's workers
The creation of OSHA provided this important right to workers - ANSWER>>The right to a safe
and healthful workplace
A Safety Data Sheet (SDS) gives information about: - ANSWER>>Hazardous chemicals
Among the rights related to OSHA recordkeeping, workers have the right to review: -
ANSWER>>The OSHA 300 Log and the OSHA 300A Summary except for items that are personal
During an OSHA inspection: - ANSWER>>You have the right to talk to the inspector privately
The right of workers to seek safety and health on the job without fear of punishment is spelled
out in: - ANSWER>>Section 11(c) of the OSH Act
One of the main responsibilities employers have under OSHA is to: - ANSWER>>Provide training
required by OSHA standards
OSHA requires that employers pay for most required personal protective equipment (PP),
including: - ANSWER>>Hard hats
The OSHA standards for Construction and General Industry are also known as: - ANSWER>>Part
1926 and Part 1910
What type of OSHA inspection is conducted when immediate death or serious harm is likely? -
ANSWER>>Imminent danger
When the employer receives an OSHA citation, it must be; - ANSWER>>Posted for 3 days or
until the violation is fixed
If you feel that an OSHA inspection is needed to get hazards corrected at your workplace, which
is your best option? - ANSWER>>Submit a written, signed complaint with specific hazard
information
- ANSWER>>Electrical Safety
OSHA's electrical standards are based on: - ANSWER>>The NEC
, What are the four main types of electrical injuries? - ANSWER>>Electrocution, electric shock,
burns, indirect (e.g., a fall from a ladder)
Electricity travels in closed circuits, and its normal route is through a conductor. Electric shock
occurs when: - ANSWER>>The body becomes part of the circuit
A shock's severity depends on: - ANSWER>>Length of exposure to electricity
The amount of current and its frequency
Electrical burns are the most serious of the three major types of burns, and most often occur: -
ANSWER>>On the hands, from direct contact with current
Hot wires, ungrounded wires that can cause a shock if you touch them, are usually: -
ANSWER>>Black or red
More than 50 percent of electrocutions are caused by a worker coming in direct contact with: -
ANSWER>>Energized power lines
The OSHA standard requires flexible cords to be rated for: - ANSWER>>Hard or extra-hard
usage
What is the most frequent violation of OSHA electrical standards? - ANSWER>>Improper
grounding of circuitry and equipment
The three elements of a basic program for electrical safety are: - ANSWER>>Recognize, evaluate
and control
All portable electric tools that are damaged shall be: - ANSWER>>Removed from use and
tagged "Do Not Use"
If you have a three-prong plug and a two-hole receptacle, it is acceptable to: - ANSWER>>Use
an adapter with an adapter wire connected to a known ground
All hazards involved in the use of power tools can be prevented by following five basic safety
rules: Keep all tools in good condition with regular maintenance; examine each tool for damage
before use; operate according to the manufacturer's instructions; provide and use the proper
protective equipment; and: - ANSWER>>Use the right tool for the job
Live parts of electric equipment operating at 50 volts or more must be: - ANSWER>>Guarded
against accidental contact
answers, 100% Verified| Latest 2024
- ANSWER>>Introduction
OSHA's mission is to: - ANSWER>>Protect the safety and health of America's workers
The creation of OSHA provided this important right to workers - ANSWER>>The right to a safe
and healthful workplace
A Safety Data Sheet (SDS) gives information about: - ANSWER>>Hazardous chemicals
Among the rights related to OSHA recordkeeping, workers have the right to review: -
ANSWER>>The OSHA 300 Log and the OSHA 300A Summary except for items that are personal
During an OSHA inspection: - ANSWER>>You have the right to talk to the inspector privately
The right of workers to seek safety and health on the job without fear of punishment is spelled
out in: - ANSWER>>Section 11(c) of the OSH Act
One of the main responsibilities employers have under OSHA is to: - ANSWER>>Provide training
required by OSHA standards
OSHA requires that employers pay for most required personal protective equipment (PP),
including: - ANSWER>>Hard hats
The OSHA standards for Construction and General Industry are also known as: - ANSWER>>Part
1926 and Part 1910
What type of OSHA inspection is conducted when immediate death or serious harm is likely? -
ANSWER>>Imminent danger
When the employer receives an OSHA citation, it must be; - ANSWER>>Posted for 3 days or
until the violation is fixed
If you feel that an OSHA inspection is needed to get hazards corrected at your workplace, which
is your best option? - ANSWER>>Submit a written, signed complaint with specific hazard
information
- ANSWER>>Electrical Safety
OSHA's electrical standards are based on: - ANSWER>>The NEC
, What are the four main types of electrical injuries? - ANSWER>>Electrocution, electric shock,
burns, indirect (e.g., a fall from a ladder)
Electricity travels in closed circuits, and its normal route is through a conductor. Electric shock
occurs when: - ANSWER>>The body becomes part of the circuit
A shock's severity depends on: - ANSWER>>Length of exposure to electricity
The amount of current and its frequency
Electrical burns are the most serious of the three major types of burns, and most often occur: -
ANSWER>>On the hands, from direct contact with current
Hot wires, ungrounded wires that can cause a shock if you touch them, are usually: -
ANSWER>>Black or red
More than 50 percent of electrocutions are caused by a worker coming in direct contact with: -
ANSWER>>Energized power lines
The OSHA standard requires flexible cords to be rated for: - ANSWER>>Hard or extra-hard
usage
What is the most frequent violation of OSHA electrical standards? - ANSWER>>Improper
grounding of circuitry and equipment
The three elements of a basic program for electrical safety are: - ANSWER>>Recognize, evaluate
and control
All portable electric tools that are damaged shall be: - ANSWER>>Removed from use and
tagged "Do Not Use"
If you have a three-prong plug and a two-hole receptacle, it is acceptable to: - ANSWER>>Use
an adapter with an adapter wire connected to a known ground
All hazards involved in the use of power tools can be prevented by following five basic safety
rules: Keep all tools in good condition with regular maintenance; examine each tool for damage
before use; operate according to the manufacturer's instructions; provide and use the proper
protective equipment; and: - ANSWER>>Use the right tool for the job
Live parts of electric equipment operating at 50 volts or more must be: - ANSWER>>Guarded
against accidental contact
