3-3 test
- ANS
\A 25 kilovolt circuat has a 14,4-kilovolt
potential to ground. The OSHA 1910.269 law
states that the minimum approach distance
is __?__ to these lines - ANS 2'4"
\A spliced wire tong has a maximum working
load rating __?__ an unjointed wire tong of the
same dimensions - ANS equal to
\A trench is dug alongside a damaged pole. This
is part of the job when replacing a pole uses
the__?__ pole method. - ANS leaning
\A wire tong __?__ is a device fitted to a wire tong that provides an attachment point for a
rope block to be used for an in-line pull and eliminates the bending strain on the tong -
ANS block clamp
\According to OSHA Guidelines, electrical
testing of rubber-insulating gloves must be
done before every issue and every __?__ thereafter - ANS 6 months
\Double cross arms can be replaced on an angle
structure by using a 3-phase circuit lifting
assembly if __?__ are used to remove the side
thrust from the lifting arm. - ANS link sticks and ropes
\I order to spread out conductors at mid-span
to set a new pole, __?__ sticks should be used - ANS roller link
\If a vertical, 3-phase, dead end has a branch
line. temporary jumpers are held to the side
with a __?__ while the phases are being
transferred to the new pole - ANS hold tong
\if a wire tongs saddle is fitted with a __?__ type pole
attachment device. It must be "cocked"
before placing the chain in the hook - ANS wheel tightener
\In the manufacture of hot stick fittings and
parts, __?__ is the basic metal used - ANS heat-treated aluminum alloy
\OSHA law mandates that rubber-insulating blankets be tested - ANS before the first
issue and every 12 month thereafter
\ridged plastic protective covers with a Class 4 rating are suitable for use on lines with a
phase-to-ground potential of 21.1 kilovolts, and if both phases are covered a
phase-to-phase potential of _____ will be present - ANS 36.6 kv
\The highest-rated rubber gloves are suitable for
AC hot line work up to - ANS 36 kv
\The minimum approach distance for 12,470 volts phase-to-phane is __?__ - ANS 2'1"
- ANS
\A 25 kilovolt circuat has a 14,4-kilovolt
potential to ground. The OSHA 1910.269 law
states that the minimum approach distance
is __?__ to these lines - ANS 2'4"
\A spliced wire tong has a maximum working
load rating __?__ an unjointed wire tong of the
same dimensions - ANS equal to
\A trench is dug alongside a damaged pole. This
is part of the job when replacing a pole uses
the__?__ pole method. - ANS leaning
\A wire tong __?__ is a device fitted to a wire tong that provides an attachment point for a
rope block to be used for an in-line pull and eliminates the bending strain on the tong -
ANS block clamp
\According to OSHA Guidelines, electrical
testing of rubber-insulating gloves must be
done before every issue and every __?__ thereafter - ANS 6 months
\Double cross arms can be replaced on an angle
structure by using a 3-phase circuit lifting
assembly if __?__ are used to remove the side
thrust from the lifting arm. - ANS link sticks and ropes
\I order to spread out conductors at mid-span
to set a new pole, __?__ sticks should be used - ANS roller link
\If a vertical, 3-phase, dead end has a branch
line. temporary jumpers are held to the side
with a __?__ while the phases are being
transferred to the new pole - ANS hold tong
\if a wire tongs saddle is fitted with a __?__ type pole
attachment device. It must be "cocked"
before placing the chain in the hook - ANS wheel tightener
\In the manufacture of hot stick fittings and
parts, __?__ is the basic metal used - ANS heat-treated aluminum alloy
\OSHA law mandates that rubber-insulating blankets be tested - ANS before the first
issue and every 12 month thereafter
\ridged plastic protective covers with a Class 4 rating are suitable for use on lines with a
phase-to-ground potential of 21.1 kilovolts, and if both phases are covered a
phase-to-phase potential of _____ will be present - ANS 36.6 kv
\The highest-rated rubber gloves are suitable for
AC hot line work up to - ANS 36 kv
\The minimum approach distance for 12,470 volts phase-to-phane is __?__ - ANS 2'1"
