Forklift OSHA Training ACCURATE
100%
It is safe to give someone a ride on your lift truck. - ANSWERFalse
Lift trucks use a hydraulic cylinder attached to chains to raise and lower the forks. -
ANSWERTrue
A break pedal that sinks to the floor under continued pressure is in good operating
condition. - ANSWERFalse
All industrial trucks (lift trucks) are equipped with a clutch. - ANSWERFalse
Of the three load positions illustrated above, which is the most stable? -
ANSWERTilted back
Wide and long loads are more unstable than other types of loads. - ANSWERTrue
Before loading or unloading a trailer at a loading dock, you should: - ANSWER-
Inspect the floor of the trailer to ensure that it will support the lift truck and the load.
- Chock the wheels of the trailer.
- Make sure that dock plates, boards, and ramps are in place and secure.
The front wheels of a lift truck serve as the ___ between the weight of the truck and
the weight of the load being carried. - ANSWERFulcrum point
In order to solve an "Inch Pound Equation", you must use information provided on a
truck's data plate. - ANSWERTrue
The three major parts of a lift truck are the body (truck), overhead guard, and
hydraulic lift. - ANSWERTrue
You can place your hands and feet outside of the operator's compartment, as long
as your head and body are protected. - ANSWERFalse
Always check the air pressure in tires from the side, not by facing the tread. -
ANSWERFalse
The load capacity of a truck can be found on its data plate. - ANSWERTrue
Which of the following is NOT a type of lift truck? - ANSWERAir-cooled Powered
When parking or leaving your truck, you should: - ANSWER- Park or leave your truck
in a safe area away from traffic.
- Lower the forks until they are flat on the floor.
- Turn off the engine.
100%
It is safe to give someone a ride on your lift truck. - ANSWERFalse
Lift trucks use a hydraulic cylinder attached to chains to raise and lower the forks. -
ANSWERTrue
A break pedal that sinks to the floor under continued pressure is in good operating
condition. - ANSWERFalse
All industrial trucks (lift trucks) are equipped with a clutch. - ANSWERFalse
Of the three load positions illustrated above, which is the most stable? -
ANSWERTilted back
Wide and long loads are more unstable than other types of loads. - ANSWERTrue
Before loading or unloading a trailer at a loading dock, you should: - ANSWER-
Inspect the floor of the trailer to ensure that it will support the lift truck and the load.
- Chock the wheels of the trailer.
- Make sure that dock plates, boards, and ramps are in place and secure.
The front wheels of a lift truck serve as the ___ between the weight of the truck and
the weight of the load being carried. - ANSWERFulcrum point
In order to solve an "Inch Pound Equation", you must use information provided on a
truck's data plate. - ANSWERTrue
The three major parts of a lift truck are the body (truck), overhead guard, and
hydraulic lift. - ANSWERTrue
You can place your hands and feet outside of the operator's compartment, as long
as your head and body are protected. - ANSWERFalse
Always check the air pressure in tires from the side, not by facing the tread. -
ANSWERFalse
The load capacity of a truck can be found on its data plate. - ANSWERTrue
Which of the following is NOT a type of lift truck? - ANSWERAir-cooled Powered
When parking or leaving your truck, you should: - ANSWER- Park or leave your truck
in a safe area away from traffic.
- Lower the forks until they are flat on the floor.
- Turn off the engine.
