gmaw safety test questions well answered to pass

gmaw safety test questions well
answered to pass

true/false amperage settings affect how much heat is generated - correct answer ✔✔false



t/f the mig welder needs a gas turned on to properly weld - correct answer ✔✔t



t/f adjust the voltage setting at the same time as you are welding - correct answer ✔✔f



t/f do not hold the electrode and the work clams at the same time - correct answer ✔✔t



t/f check the steel with your face to see if it is to hot to handle - correct answer ✔✔f



t/f if the welding torch is being pushed away from the weld during mig welding, you should increase the
wire feed rate - correct answer ✔✔f



t/f if the welding torch is being pushed away during mig welding, you should decrease the flow rate -
correct answer ✔✔f



t/f use the nimrod strike method to start the arc with the mig welder - correct answer ✔✔f



t/f oxygen makes a poor shielding gas for mig welding - correct answer ✔✔t



t/f keep the protective caps off while the cylinders are not in use - correct answer ✔✔f



what does gmaw stand for - correct answer ✔✔gas metal arc welding



what type of power source is generally used for gmaw - correct answer ✔✔constant voltage