Amphibious Embarkation Question and
answers correctly solved
Supplies and equipment are prepared by the ____ during embark operations.
- correct answer ✔landing force
Identify the packing and crating guidelines. - correct answer ✔• Maintain
uniformity in boxes, crates, pallets, and containers to the maximum degree
possible.
• Pack like items within the same box/container to facilitate ID and
accountability.
• Pad and reinforce containers to protect fragile items and prevent damage to
the container and its contents.
• Waterproof boxes or crates containing items subject to moisture
damage/deterioration.
• Apply corrosion preventive materials or other appropriate preservatives to
items requiring such protection.
• Ensure wood is non-manufactured wood packaging (NMWP-compatible and
meets all Federal and international standards.
Packing and crating responsibility of unit embarkation officer.
Identify the instructions to prepare the vehicle for loading. - correct answer
✔• Fuel tanks filled should not exceed 3/4 capacity, and a reserve supply of
fuel and lubricants in 5-gallon cans should be secured to vehicles.
• Fuel, lubricating, cooling, and ignition systems checks should be conducted,
and tires should be inflated to the specified loading pressure.
• Vehicles to be landed across the beach should be waterproofed.
,• When required, cargo compartment bows should be removed, secured
together, and attached to the body of the vehicle. Canvas tops should be
folded and placed in the vehicle.
• Cargo loaded in vehicles should be securely cross-lashed. Careful
consideration must be given to overhead clearance when mobile-loading
cargo.
Identify the placement for vehicle marking. - correct answer ✔Marked on
-each side of the bumpers
-each vehicle side (usually on doors)
-on the hood top to indicate the ship's hull number, hold level in which the
vehicle will be stowed, unloading priority number, and landing serial number
Identify placement of stowage designators. - correct answer ✔Placed on
each pallet board and in the upper left-hand corner of the top, on one side,
and on one end of each embarkation box or crate
Identify unit personnel and tonnage table (UP&TT) numbers. - correct answer
✔1-Rations
2-Water
3-Personal baggage
4-Organizational cargo
5.Organizational cargo
6-Contruction/field fortification
7-nonmilitary support
8-medical dental items
9-Personal demand items
10-Bulk fuel
11-Packaged fuel
, 12-Chemicals non-flammable
13-Chemicals flammable
14-Compressed gas
15-Other POL
16-Small arm
17-High explosives
18-Pyro
19-Nuclear
20-Missiles
21-Inert
22-Vehicles, equipment heavy lifts
23-Total square feet
24-Aircraft
25-Number of aircraft
During packing and crating, _______ and ________ containers to protect
fragile items and prevent damage to the container and its contents. - correct
answer ✔pad and reinforce
To prepare a vehicle for loading, the fuel tank should not exceed ________
capacity. - correct answer ✔3/4
Vehicle markings are placed - correct answer ✔on side of the bumpers, on
side doors, and on the hood top.
Where are stowage designators placed on embarkation boxes or crates? -
correct answer ✔Left side upper corner of boxes or crates.
answers correctly solved
Supplies and equipment are prepared by the ____ during embark operations.
- correct answer ✔landing force
Identify the packing and crating guidelines. - correct answer ✔• Maintain
uniformity in boxes, crates, pallets, and containers to the maximum degree
possible.
• Pack like items within the same box/container to facilitate ID and
accountability.
• Pad and reinforce containers to protect fragile items and prevent damage to
the container and its contents.
• Waterproof boxes or crates containing items subject to moisture
damage/deterioration.
• Apply corrosion preventive materials or other appropriate preservatives to
items requiring such protection.
• Ensure wood is non-manufactured wood packaging (NMWP-compatible and
meets all Federal and international standards.
Packing and crating responsibility of unit embarkation officer.
Identify the instructions to prepare the vehicle for loading. - correct answer
✔• Fuel tanks filled should not exceed 3/4 capacity, and a reserve supply of
fuel and lubricants in 5-gallon cans should be secured to vehicles.
• Fuel, lubricating, cooling, and ignition systems checks should be conducted,
and tires should be inflated to the specified loading pressure.
• Vehicles to be landed across the beach should be waterproofed.
,• When required, cargo compartment bows should be removed, secured
together, and attached to the body of the vehicle. Canvas tops should be
folded and placed in the vehicle.
• Cargo loaded in vehicles should be securely cross-lashed. Careful
consideration must be given to overhead clearance when mobile-loading
cargo.
Identify the placement for vehicle marking. - correct answer ✔Marked on
-each side of the bumpers
-each vehicle side (usually on doors)
-on the hood top to indicate the ship's hull number, hold level in which the
vehicle will be stowed, unloading priority number, and landing serial number
Identify placement of stowage designators. - correct answer ✔Placed on
each pallet board and in the upper left-hand corner of the top, on one side,
and on one end of each embarkation box or crate
Identify unit personnel and tonnage table (UP&TT) numbers. - correct answer
✔1-Rations
2-Water
3-Personal baggage
4-Organizational cargo
5.Organizational cargo
6-Contruction/field fortification
7-nonmilitary support
8-medical dental items
9-Personal demand items
10-Bulk fuel
11-Packaged fuel
, 12-Chemicals non-flammable
13-Chemicals flammable
14-Compressed gas
15-Other POL
16-Small arm
17-High explosives
18-Pyro
19-Nuclear
20-Missiles
21-Inert
22-Vehicles, equipment heavy lifts
23-Total square feet
24-Aircraft
25-Number of aircraft
During packing and crating, _______ and ________ containers to protect
fragile items and prevent damage to the container and its contents. - correct
answer ✔pad and reinforce
To prepare a vehicle for loading, the fuel tank should not exceed ________
capacity. - correct answer ✔3/4
Vehicle markings are placed - correct answer ✔on side of the bumpers, on
side doors, and on the hood top.
Where are stowage designators placed on embarkation boxes or crates? -
correct answer ✔Left side upper corner of boxes or crates.
