Introduction to Millwright - Exam Solution Manual Fully Solved Latest Update 2025 Already Passed
A millwright is a tradesperson who build, installs, and maintains machinery. - Answers True
____________________ is the process of reducing and shaping materials using power tools. - Answers
Machining
Pharmaceuticals and aerospace are examples of two industries in which UBC millwrights work. -
Answers True
Employability skills are best defined as the technical and physical skills and abilities that are critical for
installing and maintaining machinery. - Answers False
Which of the following are types of employability skills? - Answers Ability to work with others and to
understand and use information
Which of the following is the responsibility of a job site steward? - Answers Handling disputes within the
crew and between members of other trades
If the apprentice has a question about a task, who should he or she ask for clarification? - Answers
Journeyman
Emergency contact information is required on every job site. - Answers True
PPE is clothing and gear intended to reduce exposure to hazards in the workplace, such as hard hats,
___________, ____________, and face shields. - Answers goggles, respirators
SDSs are documents that list the properties of chemicals and their safe handling requirements. -
Answers True
A ________ is anything that causes a danger or risk. - Answers Hazard
A physical hazard is a dangle for risk that can cause injury or death through contact. - Answers True
________ ________ ________ is clothing and equipment, such as hardhats, goggles, respirators, and
face shields, intended to reduce exposure to hazards in the workplace. - Answers Personal Protective
Equipment
How a substance enters the body is known as the route __________ - Answers of exposure
The ________ ________ ________ is a document that provides crew members and emergency
personnel information on substances found in the workplace. - Answers Safety Data Sheet
Which of the following hazards is any organism or by-product of an organism that poses a threat to
living beings? - Answers Biological
To avoid infection and allergic reactions that could possibly be fatal, one of the best practices is to avoid
entering any are without understanding the hazards that might be present. - Answers True
, When welding, a crew members is commonly exposed to _________ radiation. - Answers Beta
Frustration is the feeling of security while being unaware of potential danger. - Answers False
In many cases, even before hired, the millwright must pass a site-specific safety test. - Answers True
________ meetings are daily meetings that take place before any work is conducted. - Answers Toolbox
A ________ ________ arrest system is a type of PPE that eliminates impact during fall. - Answers
Personal Fall
Stepladders should be opened fully and placed on a stable, level surface to prevent tipping. - Answers
True
For maximum stability, the crew member must always maintain ________ ________ contact while using
ladder. - Answers Three Point
Which of the following typically includes a set of vertical supports, horizontal rails, and wood or metal
platforms? - Answers Scaffold
A confined space is any space that is designed for continuous occupancy. - Answers False
Which of the following items are included in a personal fall arrest system (PFAS)? - Answers Anchorages,
connectors and a full body harness
Only those who are trained and authorized are allowed to enter a confined space. - Answers True
In most cases when lifting objects, the freestyle method of lifting should be used. - Answers False
The best way to avoid dehydration is to drink small amounts of water throughout the day. - Answers
True
The numbers 0, 1, 2, and 3 are examples of what? - Answers Whole numbers
In division the problem = 32, the number 3 is called what? - Answers Divisor
Reducing a fraction requires multiplying. - Answers False
When adding and subtracting fractions, the denominator must be the same for all fractions. - Answers
True
Using ________ and reading a ________ chart are two ways to convert between fractions and decimals.
- Answers Math, Conversion
________ is the measurement of a surface contained within a two-dimensional boundary. - Answers
Area
Calculating area requires multiplying length, width, and height. - Answers False
A millwright is a tradesperson who build, installs, and maintains machinery. - Answers True
____________________ is the process of reducing and shaping materials using power tools. - Answers
Machining
Pharmaceuticals and aerospace are examples of two industries in which UBC millwrights work. -
Answers True
Employability skills are best defined as the technical and physical skills and abilities that are critical for
installing and maintaining machinery. - Answers False
Which of the following are types of employability skills? - Answers Ability to work with others and to
understand and use information
Which of the following is the responsibility of a job site steward? - Answers Handling disputes within the
crew and between members of other trades
If the apprentice has a question about a task, who should he or she ask for clarification? - Answers
Journeyman
Emergency contact information is required on every job site. - Answers True
PPE is clothing and gear intended to reduce exposure to hazards in the workplace, such as hard hats,
___________, ____________, and face shields. - Answers goggles, respirators
SDSs are documents that list the properties of chemicals and their safe handling requirements. -
Answers True
A ________ is anything that causes a danger or risk. - Answers Hazard
A physical hazard is a dangle for risk that can cause injury or death through contact. - Answers True
________ ________ ________ is clothing and equipment, such as hardhats, goggles, respirators, and
face shields, intended to reduce exposure to hazards in the workplace. - Answers Personal Protective
Equipment
How a substance enters the body is known as the route __________ - Answers of exposure
The ________ ________ ________ is a document that provides crew members and emergency
personnel information on substances found in the workplace. - Answers Safety Data Sheet
Which of the following hazards is any organism or by-product of an organism that poses a threat to
living beings? - Answers Biological
To avoid infection and allergic reactions that could possibly be fatal, one of the best practices is to avoid
entering any are without understanding the hazards that might be present. - Answers True
, When welding, a crew members is commonly exposed to _________ radiation. - Answers Beta
Frustration is the feeling of security while being unaware of potential danger. - Answers False
In many cases, even before hired, the millwright must pass a site-specific safety test. - Answers True
________ meetings are daily meetings that take place before any work is conducted. - Answers Toolbox
A ________ ________ arrest system is a type of PPE that eliminates impact during fall. - Answers
Personal Fall
Stepladders should be opened fully and placed on a stable, level surface to prevent tipping. - Answers
True
For maximum stability, the crew member must always maintain ________ ________ contact while using
ladder. - Answers Three Point
Which of the following typically includes a set of vertical supports, horizontal rails, and wood or metal
platforms? - Answers Scaffold
A confined space is any space that is designed for continuous occupancy. - Answers False
Which of the following items are included in a personal fall arrest system (PFAS)? - Answers Anchorages,
connectors and a full body harness
Only those who are trained and authorized are allowed to enter a confined space. - Answers True
In most cases when lifting objects, the freestyle method of lifting should be used. - Answers False
The best way to avoid dehydration is to drink small amounts of water throughout the day. - Answers
True
The numbers 0, 1, 2, and 3 are examples of what? - Answers Whole numbers
In division the problem = 32, the number 3 is called what? - Answers Divisor
Reducing a fraction requires multiplying. - Answers False
When adding and subtracting fractions, the denominator must be the same for all fractions. - Answers
True
Using ________ and reading a ________ chart are two ways to convert between fractions and decimals.
- Answers Math, Conversion
________ is the measurement of a surface contained within a two-dimensional boundary. - Answers
Area
Calculating area requires multiplying length, width, and height. - Answers False
