ASE A1 - Practice Test
(Section D) fully
solved & updated
2025-2026(latest
version verified for
accuracy)
ASE A1 - Practice Test
(Section D) fully
solved & updated
2025-2026(latest
version verified for
accuracy)
7. the tester in the figure may be used to test all of the following EXCEPT:
cooling system leaks
, the radiator cap pressure relief valve
coolant specific gravity
heater core leaks - answer coolant specific gravity
8. a moderately loose alternator belt may cause:
a discharged battery
a squealing noise when accelerating
poor power steering assist
engine overheating - answer a squealing noise when accelerating
a SEVERELY worn or loose belt may cause a discharged battery, engine
overheating, or lack of power steering assist
11. an engine oil cooler helps to prevent:
oxidation of the engine oil
excessive oil pressure
oil pump wear
main bearing wear - answer oxidation of the engine oil
14. all of the following oil pump measurements should be performed with
a feeler gauge EXCEPT:
-measure pump cover flatness with a feeler gauge positioned between a
straightedge and the cover
-measure the clearance between the inner rotor and the housing
-measure the clearance between the inner and outer rotors with the rotors
installed
(Section D) fully
solved & updated
2025-2026(latest
version verified for
accuracy)
ASE A1 - Practice Test
(Section D) fully
solved & updated
2025-2026(latest
version verified for
accuracy)
7. the tester in the figure may be used to test all of the following EXCEPT:
cooling system leaks
, the radiator cap pressure relief valve
coolant specific gravity
heater core leaks - answer coolant specific gravity
8. a moderately loose alternator belt may cause:
a discharged battery
a squealing noise when accelerating
poor power steering assist
engine overheating - answer a squealing noise when accelerating
a SEVERELY worn or loose belt may cause a discharged battery, engine
overheating, or lack of power steering assist
11. an engine oil cooler helps to prevent:
oxidation of the engine oil
excessive oil pressure
oil pump wear
main bearing wear - answer oxidation of the engine oil
14. all of the following oil pump measurements should be performed with
a feeler gauge EXCEPT:
-measure pump cover flatness with a feeler gauge positioned between a
straightedge and the cover
-measure the clearance between the inner rotor and the housing
-measure the clearance between the inner and outer rotors with the rotors
installed