©THESTAR 2024/2025 ALL RIGHTS RESERVED 12:43 PM.
AWS-CWI Part B Test 6 Exam Questions
With Correct Answers 100% Verified.
The length of a fillet weld is the _______________________. - Answer✔Overall length of the
full size fillet.
The incomplete filling of the weld root is called __________________. - Answer✔Inadequate
penetration.
To zero out the dial caliper, you have to perform what function? - Answer✔Close the jaws or
contact points to no opening.
Locate the notch in the face plate and rotate it until the needle comes to zero.
Edges of members not subject to calculated stresses shall have no gouges deeper than -
Answer✔1/8"
Weld crown in pipeline applications may also be referred to as: - Answer✔Weld reinforcement
What is the acceptable amount of misalignment (hi-low) for pressure piping? -
Answer✔0.0625" or 1/16"
What is the abbreviation for nondestructive testing? - Answer✔NDT
What formula would you use to convert pounds per square inch to Megapascals? - Answer✔PSI
X 0.00689 = MPa
CVN (Charpy V Notch) testing shall conform to _______________. - Answer✔AWS B4.0
What is the abbreviation for complete joint penetration? - Answer✔CJP
Upon visual examination, there shall be ___________________. - Answer✔No evidence of
cracks
1
AWS-CWI Part B Test 6 Exam Questions
With Correct Answers 100% Verified.
The length of a fillet weld is the _______________________. - Answer✔Overall length of the
full size fillet.
The incomplete filling of the weld root is called __________________. - Answer✔Inadequate
penetration.
To zero out the dial caliper, you have to perform what function? - Answer✔Close the jaws or
contact points to no opening.
Locate the notch in the face plate and rotate it until the needle comes to zero.
Edges of members not subject to calculated stresses shall have no gouges deeper than -
Answer✔1/8"
Weld crown in pipeline applications may also be referred to as: - Answer✔Weld reinforcement
What is the acceptable amount of misalignment (hi-low) for pressure piping? -
Answer✔0.0625" or 1/16"
What is the abbreviation for nondestructive testing? - Answer✔NDT
What formula would you use to convert pounds per square inch to Megapascals? - Answer✔PSI
X 0.00689 = MPa
CVN (Charpy V Notch) testing shall conform to _______________. - Answer✔AWS B4.0
What is the abbreviation for complete joint penetration? - Answer✔CJP
Upon visual examination, there shall be ___________________. - Answer✔No evidence of
cracks
1
