2/5/25, 2:01 AM MACHINIST MATE EXAM LATEST EXAM QUESTIONS AND CORRECT ANSWERS (ALREADY GRADED A+) | PROFESSOR VER…
MACHINIST MATE EXAM LATEST EXAM
QUESTIONS AND CORRECT ANSWERS (ALREADY
GRADED A+) | PROFESSOR VERIFIED | LATEST
VERSION 2025
Save
Terms in this set (521)
What NSTM deals with NSTM 231
propulsion and SSTG
Turbines?
Whats type of rotary Simple gear pimp
pump is frequently used
as a lubricanting pump on
pumpe and other aux
equipment?
What is the normal length 3"
of a tapered plug?
What is installed on a non- Combination exhaust relief valve 2-3 psi above
condensing turbone to exhaust line pressure
protect turbine casing
from excessive pressure?
On an SSTG, what Back pressure trip
protects turbine casing
from excessive pressure?
https://quizlet.com/1001591382/machinist-mate-exam-latest-exam-questions-and-correct-answers-already-graded-a-professor-verified-latest-version-… 1/11
, 2/5/25, 2:01 AM MACHINIST MATE EXAM LATEST EXAM QUESTIONS AND CORRECT ANSWERS (ALREADY GRADED A+) | PROFESSOR VER…
When starting an SSTG, 60 degrees
what is a minimum lube oil
temp?
What are the four sections Fundamentals, systems, watchstations, qual card
of a PQS?
What is the number for a 4790/7B
PMS feedback report?
When should oil coolers When temp of lube oil leaving cooler is 100 degrees
be put into operation on
aux machinery?
DFT is designed to 15 psi and 240-250 degrees
operate at what pressure
and temp?
What is installed on a Wearing rings
centrifugal pump to
eliminate renewing of an
entire propellor and pump
casing due to rapid wear?
The federal water 1970
pollution control act was
amended in what year?
What is the NSTM for 551
compressed air systems?
What is the max allowable 3%
pressure drop across a
fuel oil duplex strainer
when online?
What is the NSTM for 241
general reduction gear?
What is the NSTM for 554
forced draft blowers?
https://quizlet.com/1001591382/machinist-mate-exam-latest-exam-questions-and-correct-answers-already-graded-a-professor-verified-latest-version-… 2/11
MACHINIST MATE EXAM LATEST EXAM
QUESTIONS AND CORRECT ANSWERS (ALREADY
GRADED A+) | PROFESSOR VERIFIED | LATEST
VERSION 2025
Save
Terms in this set (521)
What NSTM deals with NSTM 231
propulsion and SSTG
Turbines?
Whats type of rotary Simple gear pimp
pump is frequently used
as a lubricanting pump on
pumpe and other aux
equipment?
What is the normal length 3"
of a tapered plug?
What is installed on a non- Combination exhaust relief valve 2-3 psi above
condensing turbone to exhaust line pressure
protect turbine casing
from excessive pressure?
On an SSTG, what Back pressure trip
protects turbine casing
from excessive pressure?
https://quizlet.com/1001591382/machinist-mate-exam-latest-exam-questions-and-correct-answers-already-graded-a-professor-verified-latest-version-… 1/11
, 2/5/25, 2:01 AM MACHINIST MATE EXAM LATEST EXAM QUESTIONS AND CORRECT ANSWERS (ALREADY GRADED A+) | PROFESSOR VER…
When starting an SSTG, 60 degrees
what is a minimum lube oil
temp?
What are the four sections Fundamentals, systems, watchstations, qual card
of a PQS?
What is the number for a 4790/7B
PMS feedback report?
When should oil coolers When temp of lube oil leaving cooler is 100 degrees
be put into operation on
aux machinery?
DFT is designed to 15 psi and 240-250 degrees
operate at what pressure
and temp?
What is installed on a Wearing rings
centrifugal pump to
eliminate renewing of an
entire propellor and pump
casing due to rapid wear?
The federal water 1970
pollution control act was
amended in what year?
What is the NSTM for 551
compressed air systems?
What is the max allowable 3%
pressure drop across a
fuel oil duplex strainer
when online?
What is the NSTM for 241
general reduction gear?
What is the NSTM for 554
forced draft blowers?
https://quizlet.com/1001591382/machinist-mate-exam-latest-exam-questions-and-correct-answers-already-graded-a-professor-verified-latest-version-… 2/11
