Module 6-----NCCER Introduction to Basic Rigging Test Review 36------54 Exam 2025 Questions & Answers with 100% Correct Answers | Verified

The main connection fitting for chain slings is the - master link To form an endless-loop web sling, you must ----------- the ends together - splice A ---------- is the distance it takes for one strand of wire rope that makes a complete turn around the core. - one-rope lay A pulley system that has a mechanical advantage for lifting a load is a - hoist A -------------- is good for moving loads such as steel plates or concrete panels - lifting clamp A --------- hitch is used when two or more slings are connected to a load on a single hook. - bridle The way a sling is arranged to hold a load is called rigging configuration, or - hitch A --------- is the distance between the master link of the sling to either the end fitting sling or the lowest point on the basket - sling reach A ------------- is a single ring that attaches multiple slings to a hoist hook. - bull ring A --------------- is a simple rope-and-pulley system used to lift loads. - block and tackle Riggers use a -------- to help limit unwanted movement when the crane begins to move. - sling A ----------------- is a group of wire wound around a center core. - strand A ------------- is used to attach a sling to a load. - rigging hook