AWS-CWI Part B Test 2 UPDATED
ACTUAL Exam Questions and CORRECT
Answers
What is the distance a counterborne extends axially into a pipe? - CORRECT ANSWER -
Counterborne Depth
When shall incomplete fusion (IF) be considered a defect? - CORRECT ANSWER - If the
aggregate length of indications of IF exceeds 8% of the weld length in any weld less than 12
inches in length.
What is another name for weld spacing? - CORRECT ANSWER - Pitch
The bend criteria for a Procedure Qualification Test should not have a edge radius more than? -
CORRECT ANSWER - 1/8th inch
what is the abbreviation for cubic feet per hour? - CORRECT ANSWER - CFH
when qualifying a welder to make the weld on plate that is 1 inch thick what is the minimum
thickness that can be used in the test - CORRECT ANSWER - 1/2 inch
what is the abbreviation for width of Bend specimen? - CORRECT ANSWER -W
what is the abbreviation for non-destructive examination - CORRECT ANSWER - NDE
the pqr shall list _________ values of the variables used - CORRECT ANSWER - actual
the standard dimensional tolerances in this specification do not apply - CORRECT
ANSWER - To the dimensions for test specimens.
, To Annex IV.
To discontinuity acceptance limits.
A Groove melted or any reduction of the parent material adjacent to the toe or root of the weld
unfilled by weld metal is called _____________. - CORRECT ANSWER - undercutting
the response or evidence from the application of a non-destructive examination is called an
______________. - CORRECT ANSWER - indication
In pipeline the completed weld shall ___________. - CORRECT ANSWER - have all
spatter removed
a welder qualified on any material from M7 material is qualified the weld on what material -
CORRECT ANSWER - M-1 thru M-11
what is the conversion step to change PSI to KSI? - CORRECT ANSWER - take 3 decimal
places off the PSI value or divide PSI by 1000
True or false: for the welding of Base Metals with different M numbers a procedure qualification
test shall be made for each combination of M numbers to be joined - CORRECT
ANSWER - True. Except that a procedure qualification test with 1 M number shall also
qualify for that metal welded to itself and to each of the lower M number medals for M1 M3 M4
and M5 a
what is the abbreviation for inadequate penetration due to high low? - CORRECT
ANSWER - IPD
the deletion of backing used in a welder's qualification test - CORRECT ANSWER - will
require requalification of the welder
ACTUAL Exam Questions and CORRECT
Answers
What is the distance a counterborne extends axially into a pipe? - CORRECT ANSWER -
Counterborne Depth
When shall incomplete fusion (IF) be considered a defect? - CORRECT ANSWER - If the
aggregate length of indications of IF exceeds 8% of the weld length in any weld less than 12
inches in length.
What is another name for weld spacing? - CORRECT ANSWER - Pitch
The bend criteria for a Procedure Qualification Test should not have a edge radius more than? -
CORRECT ANSWER - 1/8th inch
what is the abbreviation for cubic feet per hour? - CORRECT ANSWER - CFH
when qualifying a welder to make the weld on plate that is 1 inch thick what is the minimum
thickness that can be used in the test - CORRECT ANSWER - 1/2 inch
what is the abbreviation for width of Bend specimen? - CORRECT ANSWER -W
what is the abbreviation for non-destructive examination - CORRECT ANSWER - NDE
the pqr shall list _________ values of the variables used - CORRECT ANSWER - actual
the standard dimensional tolerances in this specification do not apply - CORRECT
ANSWER - To the dimensions for test specimens.
, To Annex IV.
To discontinuity acceptance limits.
A Groove melted or any reduction of the parent material adjacent to the toe or root of the weld
unfilled by weld metal is called _____________. - CORRECT ANSWER - undercutting
the response or evidence from the application of a non-destructive examination is called an
______________. - CORRECT ANSWER - indication
In pipeline the completed weld shall ___________. - CORRECT ANSWER - have all
spatter removed
a welder qualified on any material from M7 material is qualified the weld on what material -
CORRECT ANSWER - M-1 thru M-11
what is the conversion step to change PSI to KSI? - CORRECT ANSWER - take 3 decimal
places off the PSI value or divide PSI by 1000
True or false: for the welding of Base Metals with different M numbers a procedure qualification
test shall be made for each combination of M numbers to be joined - CORRECT
ANSWER - True. Except that a procedure qualification test with 1 M number shall also
qualify for that metal welded to itself and to each of the lower M number medals for M1 M3 M4
and M5 a
what is the abbreviation for inadequate penetration due to high low? - CORRECT
ANSWER - IPD
the deletion of backing used in a welder's qualification test - CORRECT ANSWER - will
require requalification of the welder
