Neiep 500 test
#14 - ANS-What is the minimum size cord for lighting fixtures circuits in an elevator set up?
#24 - ANS-What is the smallest twine that is authorised in an elevator set up?
15 Feet - ANS-What is the maximum distance among supports of a vertical raceway, based
on NEC Article 620-32?
360 Degrees - ANS-When bending conduit, what is the most range of levels of bend allowed
between access factors?
Nine inches - ANS-You have a 10' duration of 3/four" inflexible conduit which wishes to have
a ninety diploma bend with a 16' stub height. With a 7" take-up, what's the distance from the
give up of the pipe to the mark wherein the hickey arrow is aligned?
90 degrees - ANS-What is the full in tiers of the bends in a three-bend saddle?
A plan drawing and an elevation giving dimensions - ANS-What is shown on the final layout?
Ampacity - ANS-What is the abbreviated term for contemporary wearing capacity?
DC+ - ANS-In the circuit shown, that is the commonplace twine for the second one degree?
From the Rail regardless of placement in the hoistway - ANS-How are more than one
installations of visiting cables numbered for single car?
Hoistway, Car, and Machine Room - ANS-How is the paintings divided when making plans
piping and wiring of an elevator installation?
In circular mils - ANS-How are cord sizes large than 4/zero measured?
It need to be rated for 200 tiers C - ANS-What is special approximately twine used for the
interlock circuit?
Job Abstract - ANS-What document can be the handiest place to search for such statistics
as kind of furniture, car panel, fireplace carrier floor, and so forth.?
Liquidtight Flex - ANS-What sort of flex might be used to pipe a transfer in a wet region.
National Electrical Code - ANS-What is the call of the code this is the widely wide-spread
popular for all electric wiring within the United States?
Raceway - ANS-What is the name for the complete steel device of duct, conduit, and flex
that protects the wiring?
Straight line - ANS-Which form of diagram shows a simplified direction from wonderful to bad
for all components in a circuit?
Terminal connections - ANS-What information is proven on a pull sheet?
The big name point - ANS-What is the reference factor on the skinny-wall bender for the
finish line of a again-to-again bend?
#14 - ANS-What is the minimum size cord for lighting fixtures circuits in an elevator set up?
#24 - ANS-What is the smallest twine that is authorised in an elevator set up?
15 Feet - ANS-What is the maximum distance among supports of a vertical raceway, based
on NEC Article 620-32?
360 Degrees - ANS-When bending conduit, what is the most range of levels of bend allowed
between access factors?
Nine inches - ANS-You have a 10' duration of 3/four" inflexible conduit which wishes to have
a ninety diploma bend with a 16' stub height. With a 7" take-up, what's the distance from the
give up of the pipe to the mark wherein the hickey arrow is aligned?
90 degrees - ANS-What is the full in tiers of the bends in a three-bend saddle?
A plan drawing and an elevation giving dimensions - ANS-What is shown on the final layout?
Ampacity - ANS-What is the abbreviated term for contemporary wearing capacity?
DC+ - ANS-In the circuit shown, that is the commonplace twine for the second one degree?
From the Rail regardless of placement in the hoistway - ANS-How are more than one
installations of visiting cables numbered for single car?
Hoistway, Car, and Machine Room - ANS-How is the paintings divided when making plans
piping and wiring of an elevator installation?
In circular mils - ANS-How are cord sizes large than 4/zero measured?
It need to be rated for 200 tiers C - ANS-What is special approximately twine used for the
interlock circuit?
Job Abstract - ANS-What document can be the handiest place to search for such statistics
as kind of furniture, car panel, fireplace carrier floor, and so forth.?
Liquidtight Flex - ANS-What sort of flex might be used to pipe a transfer in a wet region.
National Electrical Code - ANS-What is the call of the code this is the widely wide-spread
popular for all electric wiring within the United States?
Raceway - ANS-What is the name for the complete steel device of duct, conduit, and flex
that protects the wiring?
Straight line - ANS-Which form of diagram shows a simplified direction from wonderful to bad
for all components in a circuit?
Terminal connections - ANS-What information is proven on a pull sheet?
The big name point - ANS-What is the reference factor on the skinny-wall bender for the
finish line of a again-to-again bend?
