Testout Network Pro Exam Questions
and Answers 100% Pass
You manage a network with a single switch. On each switch port, a hub connects
multiple devices to the switch.
which condition are you most likely to experience on the network ? - ✔✔collisions
select the statement that best describes a broadcast storm. - ✔✔A Broadcast storm
occurs when there are so many broadcast messages on the network that they approach
or exceed the network bandwidth..
Which of the following solutions would you implement to eliminate switching loops? -
✔✔spanning tree
You manage a network that uses a single switch. All ports within your buildings
connect through he single switch . Which feature should you implement? - ✔✔VLANs
You manage a network that uses multiple switches. You want to provide multiple paths
between switches so that if one link goes down, an alternate path is available.
Which feature should your switch support? - ✔✔spanning tree
Katelyn Whitman, All Rights Reserved © 2025 1
,You run a small network for your business that has a single router connected to the
internet and a single switch. You keep sensitive doc.
What should you use for this situation? - ✔✔VLAN
You manage a single subnet with three switches. The switches are connected to provide
redundant paths between the switches.
Which feature prevents switching loops and ensures there is only a single active patch
between any two switches? - ✔✔Spanning tree
Which feature prevents switching loops and ensures there is only a single active path
between any two switches? - ✔✔spanning trees
A user reports that network access from her workstation is very slow. The problem does
not seem to be affecting any other users.
Which of the following conditions is the most likely cause? - ✔✔Duplex mismatch
You manage a local area network with several switches. A new employee has started
today so you connect her workstation to a switch port.
Which of the following is the most likely cause of the problem? - ✔✔Incorrect VLAN
assignment
Katelyn Whitman, All Rights Reserved © 2025 2
,You manage a network with multiple switches. You find that your switches are
experiencing heavy broadcast storms.
Which of the following will help reduce the effects of a broadcast storm? - ✔✔Enable
spanning tree on the switches
Which of the following solutions would you implement to eliminate switching loops? -
✔✔spanning tree
While viewing the status of the interfaces on a Cisco switch, you see abnormally large of
oversized ethernet frames being received on one interface. This interface is connected to
a workstation located on the 2nd floor.
What could be causing this to happen? - ✔✔The workstation's network board is
jabbering
The network board in a workstation is currently configured as follows: - ✔✔show
running-config interface
show interface
You manage a single subnet with three switches. The switches are connected to provide
redundant paths between the switches.
Katelyn Whitman, All Rights Reserved © 2025 3
, Which feature allows the switches to pass VLAN traffic between the switches? -
✔✔Trunking
You manage a network with two switches. The switches are connected together through
their Gigabit Ethernet uplink ports.
You define VLAN 1 and VLAN 2 on each switch. A device on the first switch in VLAN
1 needs to communicate with a device on the second switch also in VLAN 1.
What should you configure to allow communication between these two devices
through the switches? - ✔✔Trunking
When configuring VLANs on a switch, what type of switch ports are members of all
VLANs defined on the switch? - ✔✔Trunk Ports
Computers A and B are on the same VLAN and are separated by two switches, as
shown in the exhibit. Computer A sends a Fram to Computer B.
Which of the following best describes the composition of the frame as it travels from A
to B? - ✔✔Computer A sends a normal frame. The first switch appends a VLAN ID to
the frame. The second switch removes the VLAN ID before forwarding it to Computer
B.
Katelyn Whitman, All Rights Reserved © 2025 4
and Answers 100% Pass
You manage a network with a single switch. On each switch port, a hub connects
multiple devices to the switch.
which condition are you most likely to experience on the network ? - ✔✔collisions
select the statement that best describes a broadcast storm. - ✔✔A Broadcast storm
occurs when there are so many broadcast messages on the network that they approach
or exceed the network bandwidth..
Which of the following solutions would you implement to eliminate switching loops? -
✔✔spanning tree
You manage a network that uses a single switch. All ports within your buildings
connect through he single switch . Which feature should you implement? - ✔✔VLANs
You manage a network that uses multiple switches. You want to provide multiple paths
between switches so that if one link goes down, an alternate path is available.
Which feature should your switch support? - ✔✔spanning tree
Katelyn Whitman, All Rights Reserved © 2025 1
,You run a small network for your business that has a single router connected to the
internet and a single switch. You keep sensitive doc.
What should you use for this situation? - ✔✔VLAN
You manage a single subnet with three switches. The switches are connected to provide
redundant paths between the switches.
Which feature prevents switching loops and ensures there is only a single active patch
between any two switches? - ✔✔Spanning tree
Which feature prevents switching loops and ensures there is only a single active path
between any two switches? - ✔✔spanning trees
A user reports that network access from her workstation is very slow. The problem does
not seem to be affecting any other users.
Which of the following conditions is the most likely cause? - ✔✔Duplex mismatch
You manage a local area network with several switches. A new employee has started
today so you connect her workstation to a switch port.
Which of the following is the most likely cause of the problem? - ✔✔Incorrect VLAN
assignment
Katelyn Whitman, All Rights Reserved © 2025 2
,You manage a network with multiple switches. You find that your switches are
experiencing heavy broadcast storms.
Which of the following will help reduce the effects of a broadcast storm? - ✔✔Enable
spanning tree on the switches
Which of the following solutions would you implement to eliminate switching loops? -
✔✔spanning tree
While viewing the status of the interfaces on a Cisco switch, you see abnormally large of
oversized ethernet frames being received on one interface. This interface is connected to
a workstation located on the 2nd floor.
What could be causing this to happen? - ✔✔The workstation's network board is
jabbering
The network board in a workstation is currently configured as follows: - ✔✔show
running-config interface
show interface
You manage a single subnet with three switches. The switches are connected to provide
redundant paths between the switches.
Katelyn Whitman, All Rights Reserved © 2025 3
, Which feature allows the switches to pass VLAN traffic between the switches? -
✔✔Trunking
You manage a network with two switches. The switches are connected together through
their Gigabit Ethernet uplink ports.
You define VLAN 1 and VLAN 2 on each switch. A device on the first switch in VLAN
1 needs to communicate with a device on the second switch also in VLAN 1.
What should you configure to allow communication between these two devices
through the switches? - ✔✔Trunking
When configuring VLANs on a switch, what type of switch ports are members of all
VLANs defined on the switch? - ✔✔Trunk Ports
Computers A and B are on the same VLAN and are separated by two switches, as
shown in the exhibit. Computer A sends a Fram to Computer B.
Which of the following best describes the composition of the frame as it travels from A
to B? - ✔✔Computer A sends a normal frame. The first switch appends a VLAN ID to
the frame. The second switch removes the VLAN ID before forwarding it to Computer
B.
Katelyn Whitman, All Rights Reserved © 2025 4
